Crack propagation behavior in the stacked $${{\varvec{TaC}}}$$–$${{\varvec{Gr}}}$$ core–shell composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Adharapurapu RR, Vecchio KS, Jiang F, Rohatgi A (2005) Effects of ductile laminate thickness, volume fraction, and orientation on fatigue-crack propagation in ti-al 3 ti metal-intermetallic laminate composites. Metall Mater Trans A 36(6):1595–160810.1007/s11661-005-0251-8 ↗
2. Artina M, Fornasier M, Micheletti S, Perotto S (2015) Anisotropic mesh adaptation for crack detection in brittle materials. SIAM J Sci Comput 37(4):B633–B65910.1137/140970495 ↗
3. Aryanfar A, Goddard W III, Marian J (2019) Constriction percolation model for coupled diffusion-reaction corrosion of zirconium in pwr. Corros Sci 158:10805810.1016/j.corsci.2019.06.013 ↗
4. Asghar A, Hoffmann MR, Goddard WA III (2019) Finite-pulse waves for efficient suppression of evolving mesoscale dendrites in rechargeable batteries. Phys Rev E 100(4):042801
5. Bai Y, Sun M, Li M, Fan S, Cheng L (2018) Improved fracture toughness of laminated zrb2-sic-mosi2 ceramics using sic whisker. Ceram Int 44(8):8890–889710.1016/j.ceramint.2018.02.078 ↗
6. Bai Y, Ma Y, Sun M, Fan S, Cheng L (2019) Strong and tough zrb2 materials using a heterogeneous ceramic-metal layered architecture. J Am Ceram Soc 102(9):5013–501910.1111/jace.16424 ↗
7. Baskaran S, Halloran JW (1993) Fibrous monolithic ceramics: II, flexural strength and fracture behavior of the silicon carbide/graphite system. J Am Ceram Soc 76(9):2217–222410.1111/j.1151-2916.1993.tb07757.x ↗
8. Bermejo R, Danzer R (2010) High failure resistance layered ceramics using crack bifurcation and interface delamination as reinforcement mechanisms. Eng Fract Mech 77(11):2126–213510.1016/j.engfracmech.2010.02.020 ↗
9. Bezenšek B(2003) Elastic-plastic crack problems in the ductile-brittle transition. PhD thesis, University of Glasgow
10. Black JT, Kohser RA (2020) DeGarmo’s materials and processes in manufacturing. Wiley, Hoboken
11. Boccaccini AR, Atiq S, Boccaccini DN, Dlouhy I, Kaya C (2005) Fracture behaviour of mullite fibre reinforced-mullite matrix composites under quasi-static and ballistic impact loading. Compos Sci Technol 65(2):325–33310.1016/j.compscitech.2004.08.002 ↗
12. Bower AF (2009) Applied mechanics of solids. CRC Press, Boca Raton10.1201/9781439802489 ↗
13. Bower AF, Ortiz M (1991) A three-dimensional analysis of crack trapping and bridging by tough particles. J Mech Phys Solids 39(6):815–85810.1016/0022-5096(91)90026-K ↗
14. Bower AF, Ortiz M (1993) The influence of grain size on the toughness of monolithic ceramics10.1115/1.2904212 ↗
15. Bueno S, Baudín C (2009) Design and processing of a ceramic laminate with high toughness and strong interfaces. Composites Part A 40(2):137–14310.1016/j.compositesa.2008.10.012 ↗
16. Clegg WJ, Howard SJ, Lee W, Phillipps AJ, Stewart RA (1994) Interfacial cracking in ceramic laminates. Compos Interfaces 2(5):337–34910.1163/156855494X00175 ↗
17. Davis JB, Kristoffersson A, Carlström E, Clegg WJ (2000) Fabrication and crack deflection in ceramic laminates with porous interlayers. J Am Ceram Soc 83(10):2369–237410.1111/j.1151-2916.2000.tb01563.x ↗
18. Deng Y, Li W, Shao J, Zhang X, Kou H, Geng P, Zhang X, Li Y, Ma J (2017) A novel theoretical model to predict the temperature-dependent fracture strength of ceramic materials. J Eur Ceram Soc 37(15):5071–507710.1016/j.jeurceramsoc.2017.06.044 ↗
19. Dijkstra EW et al (1959) A note on two problems in connexion with graphs. Numer Math 1(1):269–27110.1007/BF01386390 ↗
20. Dusane AR, Budarapu PR, Pradhan AK, Natarajan S, Reinoso J, Paggi M (2022) Simulation of bridging mechanisms in complex laminates using a hybrid pf-czm method. Mech Adv Mater Struct 29(28):7743–777110.1080/15376494.2021.2006835 ↗
21. Entezari A, Roohani-Esfahani S-I, Zhang Z, Zreiqat H, Dunstan CR, Li Q (2016) Fracture behaviors of ceramic tissue scaffolds for load bearing applications. Sci Rep 6(1):1–1010.1038/srep28816 ↗
22. Fabbrocino F, Funari MF, Greco F, Lonetti P, Luciano R, Penna R (2019) Dynamic crack growth based on moving mesh method. Composites Part B 174:10705310.1016/j.compositesb.2019.107053 ↗
23. Faber KT, Evans AG (1983) Crack deflection processes-i. Theory. Acta Metall 31(4):565–57610.1016/0001-6160(83)90046-9 ↗
24. Fahrenholtz WG, Wuchina EJ, Lee WE, Zhou Y (2014) Ultra-high temperature ceramics: materials for extreme environment applications. Wiley, Hoboken10.1002/9781118700853 ↗
25. Guinea GV, Pastor JY, Planas J, Elices M (1998) Stress intensity factor, compliance and cmod for a general three-point-bend beam. Int J Fract 89:103–11610.1023/A:1007498132504 ↗
26. Hefter J, Arlene Hecker F, Mahoney M, Harris JE (1993) Microstructural characterization of structural ceramics using image processing and analysis. J Am Ceram Soc 76(6):1551–155710.1111/j.1151-2916.1993.tb03938.x ↗
27. Heimann RB (2010) Classic and advanced ceramics: from fundamentals to applications. Wiley, Hoboken10.1002/9783527630172 ↗
28. Hilmas G, Brady A, Abdali U, Zywicki G, Halloran J (1995) Fibrous monoliths: non-brittle fracture from powder-processed ceramics. Mater Sci Eng A 195:263–26810.1016/0921-5093(94)06525-X ↗
29. Hossain MZ, Hsueh C-J, Bourdin B, Bhattacharya K (2014) Effective toughness of heterogeneous media. J Mech Phys Solids 71:15–3210.1016/j.jmps.2014.06.002 ↗
30. Hvizdoš P, Tatarko P, Duszova A, Dusza J (2013) Failure mechanisms of ceramic nanocomposites. In: Ceramic nanocomposites. Elsevier, Amsterdam, pp 117–15210.1533/9780857093493.1.117 ↗
31. Hwang JH, Lee CS, Hwang W (2001) Effect of crack propagation directions on the interlaminar fracture toughness of carbon/epoxy composite materials. Appl Compos Mater 8(6):411–43310.1023/A:1012663722334 ↗
32. Inoue J, Nambu S, Ishimoto Y, Koseki T (2008) Fracture elongation of brittle/ductile multilayered steel composites with a strong interface. Scripta Mater 59(10):1055–105810.1016/j.scriptamat.2008.07.020 ↗
33. Jayaram MA, Fleyeh H (2016) Convex hulls in image processing: a scoping review. Am J Intell Syst 6(2):48–58
34. Khan R (2019) Fiber bridging in composite laminates: a literature review. Compos Struct 229:11141810.1016/j.compstruct.2019.111418 ↗
35. Kovar D, King BH, Trice RW, Halloran JW (1997) Fibrous monolithic ceramics. J Am Ceram Soc 80(10):2471–248710.1111/j.1151-2916.1997.tb03148.x ↗
36. Le Yu, Liu H, Wang Y, Kuwata N, Osawa M, Kawamura J, Ye S (2013) Preferential adsorption of solvents on the cathode surface of lithium ion batteries. Angew Chem 125(22):5865–586810.1002/ange.201209976 ↗
37. Lee WK, Ratnam MM, Ahmad ZA (2016) Detection of fracture in ceramic cutting tools from workpiece profile signature using image processing and fast fourier transform. Precis Eng 44:131–14210.1016/j.precisioneng.2015.11.001 ↗
38. Li Y, Zhou M (2013) Prediction of fracturess toughness of ceramic composites as function of microstructure Ii analytical model. J Mech Phys Solids 61(2):489–50310.1016/j.jmps.2012.09.011 ↗
39. Li X, Zou L, Ni H, Reynolds AP, Wang C, Huang Y (2008) Micro/nanoscale mechanical characterization and in situ observation of cracking of laminated si3n4/bn composites. Mater Sci Eng C 28(8):1501–150810.1016/j.msec.2008.04.009 ↗
40. Linstrom PJ, Mallard WG (2001) The nist chemistry webbook: a chemical data resource on the internet. J Chem Eng Data 46(5):1059–106310.1021/je000236i ↗
41. Liu H, Hsu SM (1996) Fracture behavior of multilayer silicon nitride/boron nitride ceramics. J Am Ceram Soc 79(9):2452–245710.1111/j.1151-2916.1996.tb08996.x ↗
42. Liu Y, Li B, Chongjun W, Zheng Y (2016) Simulation-based evaluation of surface micro-cracks and fracture toughness in high-speed grinding of silicon carbide ceramics. Int J Adv Manuf Technol 86(1):799–80810.1007/s00170-015-8218-4 ↗
43. Luna GG, Axinte D, Novovic D (2020) Influence of grit geometry and fibre orientation on the abrasive material removal mechanisms of SiC/SiC ceramic matrix composites (CMCS). Int J Mach Tools Manuf 157:103580
44. Moattari M, Sattari-Far I, Persechino I, Bonora N (2016) Prediction of fracture toughness in ductile-to-brittle transition region using combined CDM and Beremin models. Mater Sci Eng A 657:161–17210.1016/j.msea.2015.12.090 ↗
45. Mosler J, Meschke G (2004) Embedded crack vs. smeared crack models a comparison of elementwise discontinuous crack path approaches with emphasis on mesh bias. Comput Methods Appl Mech Eng 193(30–32):3351–337510.1016/j.cma.2003.09.022 ↗
46. Muju S (2000) Crack propogation in bimaterial multilayered periodically microcracking composite media. Compos Sci Technol 60(12–13):2213–222110.1016/S0266-3538(00)00016-6 ↗
47. Needleman A, Tvergaard V (1994) Mesh effects in the analysis of dynamic ductile crack growth. Eng Fract Mech 47(1):75–9110.1016/0013-7944(94)90239-9 ↗
48. Nino A, Hirabara T, Sugiyama S, Taimatsu H (2015) Preparation and characterization of tantalum carbide (tac) ceramics. Int J Refract Metal Hard Mater 52:203–20810.1016/j.ijrmhm.2015.06.015 ↗
49. Oechsner M, Hillman C, Lange FF (1996) Crack bifurcation in laminar ceramic composites. J Am Ceram Soc 79(7):1834–183810.1111/j.1151-2916.1996.tb08003.x ↗
50. Otsu N (1975) A threshold selection method from gray-level histograms. Automatica 11(285–296):23–27
51. Parmigiani JP, Thouless MD (2006) The roles of toughness and cohesive strength on crack deflection at interfaces. J Mech Phys Solids 54(2):266–28710.1016/j.jmps.2005.09.002 ↗
52. Peng J, Dong H, Hojamberdiev M, Yi D, Yang Y, Bao H, Li H, Li H, Mao D, Meng L (2017) Improving the mechanical properties of tantalum carbide particle-reinforced iron-based composite by varying the tac contents. J Alloy Compd 726:896–90510.1016/j.jallcom.2017.08.050 ↗
53. Perrière L, Valle R, Mazerolles L, Parlier M (2008) Crack propagation in directionally solidified eutectic ceramics. J Eur Ceram Soc 28(12):2337–234310.1016/j.jeurceramsoc.2008.01.005 ↗
54. Phillipps AJ, Clegg WJ, Clyne TW (1993) Fracture behaviour of ceramic laminates in bending-i modelling of crack propagation. Acta Metall Mater 41(3):805–81710.1016/0956-7151(93)90014-J ↗
55. Qiu M, Finlayson GD, Qiu G (2008) Contrast maximizing and brightness preserving color to grayscale image conversion. In: Conference on colour in graphics, imaging, and vision. Society for Imaging Science and Technology, pp 347–35110.2352/CGIV.2008.4.1.art00075 ↗
56. Rezaei F, Kakroudi MG, Shahedifar V, Vafa NP, Golrokhsari M (2017) Densification, microstructure and mechanical properties of hot pressed tantalum carbide. Ceram Int 43(4):3489–349410.1016/j.ceramint.2016.10.067 ↗
57. Sarah K, Thamburaja P, Srinivasa A, Reddy JN (2020) Numerical simulations of damage and fracture in viscoelastic solids using a nonlocal fracture criterion. Mech Adv Mater Struct 27(13):1085–109710.1080/15376494.2020.1716414 ↗
58. Shahedifar V, Kakroudi MG (2018) Fracture behavior improvement of tac-based ceramic composites by fibrous structure. Int J Refract Metals Hard Mater 71:15–2010.1016/j.ijrmhm.2017.10.025 ↗
59. Shahedifar V, Kakroudi MG, Baharvandi HR, Rezaei F (2019) Investigation of strength, fracture toughness, and crack propagation pattern of tac-based fibrous monoliths as a function of microstructure architecture. Int J Refract Metals Hard Mater 78:332–33910.1016/j.ijrmhm.2018.10.013 ↗
60. Shahedifar V, Kakroudi MG, Vafa NP (2020) Characterization of tac-based fibrous-monolithic ceramics made of fibers with different core/shell volume ratios and orientations. Mater Sci Eng A 775:13893510.1016/j.msea.2020.138935 ↗
61. Silvestroni L, Pienti L, Guicciardi S, Sciti D (2015) Strength and toughness: the challenging case of tac-based composites. Composites Part B 72:10–2010.1016/j.compositesb.2014.11.043 ↗
62. Skiena S (1990) Dijkstra’s Algorithm. Implementing Discrete Mathematics: Combinatorics and Graph Theory with Mathematica. Addison-Wesley, Reading, pp 225–227
63. Soboyejo W (2002) Mechanical properties of engineered materials. CRC Press, Boca Raton10.1201/9780203910399 ↗
64. Song K, Yunhua X, Zhao N, Zhong L, Shang Z, Shen L, Wang J (2016) Evaluation of fracture toughness of tantalum carbide ceramic layer: a vickers indentation method. J Mater Eng Perform 25:3057–306410.1007/s11665-016-2161-x ↗
65. Tada H, Paris PC, Irwin GR (1973) The stress analysis of cracks. Handbook, Del Research Corporation, 34(1973)
66. Tallinen T, Mahadevan L (2011) Forced tearing of ductile and brittle thin sheets. Phys Rev Lett 107(24):24550210.1103/PhysRevLett.107.245502 ↗
67. Thamburaja P, Sarah K, Srinivasa A, Reddy JN (2019) Fracture of viscoelastic materials: Fem implementation of a non-local & rate form-based finite-deformation constitutive theory. Comput Methods Appl Mech Eng 354:871–90310.1016/j.cma.2019.05.032 ↗
68. Torre LL, Winkler B, Schreuer J, Knorr K, Avalos-Borja M (2005) Elastic properties of tantalum carbide (tac). Solid State Commun 134(4):245–25010.1016/j.ssc.2005.01.036 ↗
69. Valerio Carollo J, Reinoso MP (2018) Modeling complex crack paths in ceramic laminates: a novel variational framework combining the phase field method of fracture and the cohesive zone model. J Eur Ceram Soc 38(8):2994–300310.1016/j.jeurceramsoc.2018.01.035 ↗
70. Vandenberghe N, Villermaux E (2013) Geometry and fragmentation of soft brittle impacted bodies. Soft Matter 9(34):8162–817610.1039/c3sm50789k ↗
71. Warwick CM, Clegg WJ (2009) Crack deflection at structured interlayers. In: Proceedings of composites, advanced ceramics, materials, and structures-B-19 Conference, p 84710.1002/9780470314784.ch27 ↗
72. Watts J, Hilmas G (2006) Crack deflection in tungsten carbide based laminates. Int J Refract Metal Hard Mater 24(3):222–22810.1016/j.ijrmhm.2005.04.005 ↗
73. Wei C, Zhang X, Li S (2014) Laminated zrb2-sic/graphite ceramics with simultaneously improved flexural strength and fracture toughness. Ceram Int 40(3):5001–500610.1016/j.ceramint.2013.08.070 ↗
74. Wei C, Chenglin W, Wojnar C (2019) Effect of patterned inclusions on the fracture behavior of ceramic composites. Composites Part B 172:564–59210.1016/j.compositesb.2019.05.058 ↗
75. Yasmin A, Daniel IM (2004) Mechanical and thermal properties of graphite platelet epoxy composites. Polymer 45(24):8211–821910.1016/j.polymer.2004.09.054 ↗
76. Zhou F, Molinari J-F (2004) Dynamic crack propagation with cohesive elements: a methodology to address mesh dependency. Int J Numer Methods Eng 59(1):1–2410.1002/nme.857 ↗
77. Zou L, Huang Y, Chen R, Wang CA, Park D-S (2003) The measurement and characterization of the interfacial toughness of si3n4/bn composites by a three-point bending test. J Eur Ceram Soc 23(11):1987–199610.1016/S0955-2219(02)00430-2 ↗