Effect of graphene oxide addition on the interlaminar shear property of carbon fiber-reinforced epoxy composites
Source abstract
Abstract
Carbon fiber-reinforced composites were manufactured by hot pressing stacked carbon fiber prepregs using graphene oxide (GO)-modified epoxy resin as the matrix. Tetrahydrofuran was used as the solvent to disperse GO in the epoxy resin. Results showed that a homogeneous GO-modified epoxy system could be obtained, which was stable for approximately 3 h, long enough to produce the prepreg. The incorporation of 0.10 wt% GO into the epoxy resin achieved the largest interlaminar shear strength (ILSS) of 96.14 MPa for laminates, 8.05% higher than that without GO. Also, the glass transition temperature of the composite was increased by approximately 5 °C. The improvement of ILSS could be attributed to the toughening of the epoxy resin and an improvement in the interfacial adhesion between carbon fibers and epoxy matrix.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fiber/bismaleimide (BMI) composite [J]10.1016/j.matdes.2011.04.007 ↗
2. Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength [J]10.1016/j.compscitech.2006.07.018 ↗
3. Influence of carbon fiber's surface state on interlaminar shear properties of CFRP laminate [J]10.1080/15685543.2013.813188 ↗
4. Effect of NH2-MWCNTs on crosslink density of epoxy matrix and ILSS properties of E-glass/epoxy composites [J]10.1016/j.compstruct.2012.07.019 ↗
5. Mechanical properties of glass-fiber reinforced epoxy composites filled with Al2O3 particles [J]10.1177/0731684408093975 ↗
6. Effect of nano-SiO2 modified emulsion sizing on the interfacial adhesion of carbon fibers reinforced composites [J]10.1016/j.matlet.2006.11.121 ↗
7. Thermo-mechanical characterization of epoxy/clay nanocomposites as matrices for carbon/nanoclay/epoxy laminates [J]10.1016/j.msea.2011.04.042 ↗
8. Interlaminar properties of carbon fiber composites with halloysite nanotube-toughened epoxy matrix [J]10.1016/j.compscitech.2011.01.018 ↗
9. Improvements in mechanical properties of a carbon fiber epoxy composite using nanotube science and technology [J]10.1016/j.compstruct.2010.03.019 ↗
10. Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes [J]10.1016/j.compositesa.2007.11.013 ↗
11. Nano-epoxy resins containing electrospun carbon nanofibers and the resulting hybrid multi-scale composites [J]10.1016/j.compositesb.2013.10.048 ↗
12. Improvement in mechanical properties of carbon fabric-epoxy composite using carbon nanofibers [J]10.1016/j.jmatprotec.2007.07.028 ↗
13. Enhancement of the mechanical performance of an epoxy resin and fiber reinforced epoxy resin composites by the introduction of CNF and PZT particles at the microscale [J]10.1016/j.compositesa.2006.04.015 ↗
14. Improved bonding between PAN-based carbon fibers and fullerene-modified epoxy matrix [J]10.1016/j.compositesa.2008.08.005 ↗
15. Mechanical enhancement of carbon fiber/epoxy composites by graphite nanoplatelet reinforcement [J]10.1016/j.scriptamat.2006.12.038 ↗
16. Reinforcement of carbon/epoxy composites with multi-wall carbon nanotubes and dispersion enhancing block copolymers [J]10.1016/j.scriptamat.2007.11.011 ↗
17. Graphene: status and prospects [J]10.1126/science.1158877 ↗
18. Impermeable atomic membranes from graphene sheets [J]10.1021/nl801457b ↗
19. Superior thermal conductivity of single-layer graphene [J]10.1021/nl0731872 ↗
20. Functionalized graphene sheets for polymer nanocomposites [J]10.1038/nnano.2008.96 ↗
21. Measurement of the elastic properties and intrinsic strength of monolayer graphene [J]10.1126/science.1157996 ↗
22. Thermal expansion of graphene composites [J]10.1021/ma900631c ↗
23. Enhanced mechanical properties of nanocomposites at low graphene content [J]10.1021/nn9010472 ↗
24. Improving the mechanical properties of graphene oxide based materials by covalent attachment of polymer chains [J]10.1016/j.carbon.2012.09.046 ↗
25. Single-layer graphene nanosheets with controlled grafting of polymer chains [J]10.1039/b919078c ↗
26. Graphene/polyurethane nanocomposites for improved gas barrier and electrical conductivity [J]10.1021/cm100477v ↗
27. Functionalized graphenes and thermoplastic nanocomposites based upon expanded graphite oxide [J]10.1002/marc.200800754 ↗
28. Preparation of graphitic oxide [J]10.1021/ja01539a017 ↗
29. Preparation of Ni-reduced graphene oxide nanocomposites by Pd-activated electroless deposition and their magnetic properties [J]10.1016/j.apsusc.2012.05.058 ↗
30. Preparation of graphene by the rapid and mild thermal reduction of graphene oxide induced by microwaves [J]10.1016/j.carbon.2009.11.037 ↗
31. Unconventional electronic and magnetic functions of nanographene-based host-guest systems [J]10.1039/b800138n ↗
32. Synthesis and solid-state NMR structural characterization of 13C-labeled graphite oxide [J]10.1126/science.1162369 ↗
33. Band-like transport in surface-functionalized highly solution-processable graphene nanosheets [J]10.1002/adma.200800279 ↗
34. Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide [J]10.1021/am201757v ↗
35. A green approach to the synthesis of graphene nanosheets [J]10.1021/nn900227d ↗
36. Colloidal suspensions of highly reduced graphene oxide in a wide variety of organic solvents [J]10.1021/nl803798y ↗
37. Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide [J]10.1016/j.carbon.2007.02.034 ↗
38. The reinforcing effect of graphene nanosheets on the cryogenic mechanical properties of epoxy resins [J]10.1016/j.compscitech.2012.06.021 ↗
39. Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibers [J]10.1016/j.carbon.2012.07.011 ↗
40. Epoxy/graphene platelets nanocomposites with two levels of interface strength [J]10.1016/j.polymer.2011.02.003 ↗
41. Graphene oxide papers modified by divalent ions-enhancing mechanical properties via chemical cross-linking [J]10.1021/nn700349a ↗
42. Mechanical property improvement of carbon fiber reinforced epoxy composites by Al2O3 filler dispersion [J]10.1016/0167-577X(95)00224-3 ↗
43. Cryogenic mechanical behaviors of MMT/epoxy nanocomposites [J]10.1016/j.compscitech.2007.05.012 ↗
44. Recent advances in the covalent modification of graphene with polymers [J]10.1002/marc.201100527 ↗
45. Constructing hierarchically structured interphases for strong and tough epoxy nanocomposites by amine-rich graphene surfaces [J]10.1039/c0jm01620a ↗
46. Glass transition improvement in epoxy/graphene composites [J]10.1007/s10853-013-7478-3 ↗
47. Dynamic mechanical analysis studies of the interphase [J]10.1002/pc.750080505 ↗
48. Influence of fiber-matrix adhesion on mechanical properties of graphite/epoxy composites: III. Impact and dynamic mechanical properties [J]10.1177/073168440001900902 ↗