Three-dimensional numerical analysis of stress intensity factors at the intersection of a crack and pore channels with star-like cross-section
Source abstract
Abstract
The three-dimensional numerical analysis of stress intensity factors (SIF) at the intersection of a main crack (MC) and pore channels has been performed. Each channel consists of three channel cracks (CC) united by their mouths on the channel axis. It has been shown that the rupture of the MC face by the differently oriented CC gives rise to the local SIF at the MC front that is differs more than twice from the mean SIF. The maximum local SIF for the CC the plane of which is parallel to the MC front is four times higher than the SIF for the CC the plane of which is perpendicular to the MC front. The total shearing and tearing mode SIF at the CC front has three local maxima. One maximum is located at the intersection of the CC front with a plane, to which the MC face belongs. Additional peaks are located at some distance from both sides of this plane.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rock Mechanics and Modeling · Numerical methods in engineering · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Akisanya AR, Cocks ACF, Fleck NA (1994) Hydrostatic compaction of cylindrical particles. J Mech Phys Solids 42: 1067–108510.1016/0022-5096(94)90060-4 ↗
2. Anderson H (1969) Stress-intensity factors at the tips of a star-shaped contour in an infinite tensile sheet. J Mech Phys Solids 17: 4058–441710.1016/0022-5096(69)90026-X ↗
3. Borovik VG (2011a) Stress intensity factors at the intersection of a crack and pore channels with various cross-sections. Int J Fract 169: 105–11110.1007/s10704-011-9590-1 ↗
4. Borovik VG (2011b) Stress intensity factors K I and K II for cracks in tops of parallel pores channels with starlike cross sections. Powder Metall Met Ceram 50: 130–14010.1007/s11106-011-9310-4 ↗
5. Borovik VG, Grigor’ev ON, Subbotin VN (2012) New structural material with unidirectional fibrous structure. Powder Metall Met Ceram 51(1–2): 65–74
6. Cook J, Gordon JE (1964) A mechanism for the control of crack propagation in all-brittle systems. Proc R Soc (London) Ser A 282: 5088–552010.1098/rspa.1964.0248 ↗
7. He M-Y, Hutchinson JW (1989) Crack deflection at an interface between dissimilar elastic materials. Int J Solids Struct 25: 1053–106710.1016/0020-7683(89)90021-8 ↗
8. Ishikawa T (1999) Crack-resistant fiber-bonded ceramic. Adv Eng Mater 1: 59–6110.1002/(SICI)1527-2648(199909)1:1<59::AID-ADEM59>3.0.CO;2-4 ↗
9. Kachanov M (1993) Elastic solids with many cracks and related problems. Adv Appl Mech 30: 259–44510.1016/S0065-2156(08)70176-5 ↗
10. Kachanov M, Laures L-P (1989) Three-dimensional problems of strongly interacting arbitrarily located penny-shaped cracks. Int J Fract 41: 289–31310.1007/BF00018861 ↗
11. Kovar D, King BH, Trice RW, Halloran JW (1997) Fibrous monolithic ceramics. J Am Ceram Soc 80: 2471–248710.1111/j.1151-2916.1997.tb03148.x ↗
12. Lazarus V (2003) Brittle fracture and fatigue propagation paths of 3D plane cracks under uniform remote tensile loading. Int J Fract 122: 23–4610.1023/B:FRAC.0000005373.73286.5d ↗
13. Li J (2000) Debonding of the interface as ‘crack arrestor’. Int J Fract 105: 57–7910.1023/A:1007603809972 ↗
14. Lo KK (1978) Analysis of branched cracks. J Appl Mech 45: 797–80210.1115/1.3424421 ↗
15. Suiker ASJ, Fleck NA (2004) Crack tunneling and plane-strain delamination in layered solids. Int J Fract 25: 1–3210.1023/B:FRAC.0000021064.52949.e2 ↗
16. Smith E (1968) Crack bifurcation in brittle solids. J Mech Phys Solids 16: 329–33610.1016/0022-5096(68)90020-3 ↗
17. Westergaard HM (1939) Bearing pressures and cracks. Trans ASME Ser E J Appl Mech 61: A49–A5310.1115/1.4008919 ↗