The elastic interaction of screw dislocations and a star crack with a central hole
Source abstract
Abstract
The elastic interaction of screw dislocations and a star crack with a central hole was investigated. The complex potential of the present problem was obtained from that of an internal crack in an infinite medium using the conformal mapping technique. The stress field, image force and strain energy of dislocation, and stress intensity factor at the crack tip were derived. The critical stress intensity factor for dislocation emission was calculated based on the spontaneous dislocation emission criterion. The influence of the ratio of crack length to hole radius, crack number, and dislocation source on the above mechanical variables were studied. The present solution was reduced to several special cases previously reported in the literature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Numerical methods in engineering · Fatigue and fracture mechanics · Nonlocal and gradient elasticity in micro/nano structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Bowie, O.L. (1956). Analysis of an infinite plate containing radial cracks originating at the boundary of an internal circular hole. Journal of Mathematics and Physics 35, 60-71.10.1002/sapm195635160 ↗
2. Bowie, O.L. (1973). Solutions of plane crack problems by mapping technique in Mechanics of Fracture (Edited by G.C.M. Sih) Martinus Nijhoff, Hague, The Netherlands, 1973, Vol. I, 1-55.
3. Chen, X., Lotswhaw, W.T., Ortiz, A.L., Staver, P.R., Erikson, C.E., McLaughlin, M.H. and Rockstroh, T.J. (1996). Laser drilling of advanced materials: effects of peak power, pulse format, and wavelength. Journal of Laser Applications 8, 233-239.10.2351/1.4745427 ↗
4. Clarke, D.R., Langer, J.S., Gerberich, W.W. and Thomson, R.M. (1997). Proceedings of Fifth International Conference on the Fundamentals of Fracture, Institute of Mechanics and Materials, University of California, San Diego, U.S.A.
5. Faulk, N.M. (1995). Electrical discharge machining of advanced ceramics. EDM Technology Transfer 2, 34-41.
6. Horio, K. and Terabayashi, T. (1987). Beam defocus effect in electron beam machining of green ceramic sheet. Annals of CIRP 36, 95-98.10.1016/S0007-8506(07)62562-1 ↗
7. Inamura, T. and Shimada, S. (1997). Brittle/ductile transition phenomena observed in computer simulations of machining defect-free monocrystalline silicon. Annals of the CIRP 46, 31-34.10.1016/S0007-8506(07)60769-0 ↗
8. Juang, R.P. and Lee, S. (1986). Elastic interaction between general parallel screw dislocations and a surface crack. Journal of Applied Physics 59, 3421-3429.10.1063/1.336809 ↗
9. Kimura, H., Narita, N., Suzuki, T., Suzuki, T. and Watanabe, T. (1994). Proceedings of the Yamada Conference XXXVI on Fourth International Conference on the Fundamentals of Fracture, Yamada Science Foundation, Japan.
10. Lee, S., Burns, S.J. and Li, J.C.M. (1986). Image forces and potential energy of a dislocation around a crack tip. Materials Science and Engineering 83, 65-73.10.1016/0025-5416(86)90174-6 ↗
11. Lin, K.M., Hu, C.T. and Lee, S. (1987). Comparison of the effects of dislocations around internal and surface cracks on fracture. Materials Science and Engineering 95, 167-174.10.1016/0025-5416(87)90508-8 ↗
12. Liu, Y., Jia, Z. and Liu, J. (1997). Study on whole machining of nonconducting ceramics by gas-filled electrodischarge and electrochemical compound machining. Journal of Materials Processing Technology 69, 198-202.10.1016/S0924-0136(97)00018-6 ↗
13. Majumdar, B.S. and Burns, S.J. (1981). Crack-tip shielding - an elastic theory of dislocations and dislocation arrays near a sharp crack. Acta Metallurgica 29, 579-588.10.1016/0001-6160(81)90139-5 ↗
14. Malkin, S. and Ritter, J.E. (1992). Grinding mechanisms and strength degradation for ceramics. Key Engineering Materials 71, 195-212.10.4028/www.scientific.net/KEM.71.195 ↗
15. Masuzawa, T., Tsukamoto, J. and Fujino, M. (1989). Drilling of deep microholes by EDM. Annals of the CIRP 38, 195-198.10.1016/S0007-8506(07)62683-3 ↗
16. Mordecai, N.L., Lee, T.C. and Huddleston, J. (1995). Developments in spark erosion of ceramics. British Ceramic Transactions 94, 21-24.
17. Neumann, P. (1993). Third International Conference On the Fundamentals of Fracture, Irsee, Germany, June 19-24.
18. Ohr, S.M. (1985). An electron microscope study of crack-tip deformation and its impact on the dislocation theory of fracture. Materials Science and Engineering 72, 1-35.10.1016/0025-5416(85)90064-3 ↗
19. Ohr, S.M. (1986). Second International Conference On the Fundamentals of Fracture, Gatlinburg, TN, USA, November 4-7.
20. Paine, A.S. and Please, C.P. (1993). Asymptotic analysis of a star crack with a central hole. International Journal of Engineering Science 31, 893-898.10.1016/0020-7225(93)90101-Y ↗
21. Paris, P.C. and Sih, G.C.M. (1965). Stress analysis of cracks in Fracture Toughness Testing and its Applications, ASTM STP 381, Philadelphia, PA, 30-83.
22. Quchterlony, F. (1974). Fracture mechanics applied to rock blasting in Advances in Rock Mechanics - Reports of Current Research, Proceeding of the Third ISRM Congress Vol. II-Part B, National Academy of Sciences, Washington, DC, 1377-1383.
23. Rezaci, S.M., Suto, T., Waida, T. and Noguchi, T. (1992). Creep feed grinding of advanced ceramics. Proceedings of the Institution of Mechanical Engineers 206, 93-99.
24. Rice, J.R. and Thomson, R. (1974). Ductile versus brittle behavior of crystals. Philosophical Magazine A29, 73-97.10.1080/14786437408213555 ↗
25. Rubinstein, A.A. and Sadegh, A.M. (1986). Analysis of a crack emanating from a circular hole in a loaded plane. International Journal of Fracture 32, 47-57.10.1007/BF00045892 ↗
26. Shimada, S., Ikawa, N., Tanaka, H. and Uchikoshi, J. (1994). Structure of micromachined surface simulated by molecular dynamics analysis. Annals of the CIRP 43, 51-54.10.1016/S0007-8506(07)62162-3 ↗
27. Shiue, S.T. and Lee, S. (1988). The elastic interaction between screw dislocations and cracks emanating from an elliptic hole. Journal of Applied Physics 64, 129-139.10.1063/1.341456 ↗
28. Snoeys, R., Staelens, F. and Dekeyser, W. (1986). Current trends in nonconventional material removal processes, Annals of CIRP 35(2), 467-480.10.1016/S0007-8506(07)60195-4 ↗
29. Thomson, R. (1983). First International Conference On the Fundamentals of Fracture, National Bureau of standards, Gaithersburg, MD, USA, June 6-8.
30. Tsutsumi, C., Okana, K. and Suto, T. (1993). High quality machining of ceramics. Journal of Materials Processing Technology 37, 639-654.10.1016/0924-0136(93)90124-O ↗
31. Venkatesh, V.C., Inasaki, I., Toenshof, H.K., Nakagawa, T. and Marinescu, I.D. (1995). Observations on polishing an ultraprecision machining of semiconductor substrate materials. Annals of the CIRP 44, 611-618.10.1016/S0007-8506(07)60508-3 ↗
32. Warren, W.E. (1970). Interaction of dislocations with surface notches and protrusions, International Journal of Engineering Science 8, 545-558.10.1016/0020-7225(70)90040-6 ↗
33. Westmann, R.A. (1964). Pressurized star crack. Journal of Mathematics and Physics 43, 191-198.10.1002/sapm1964431191 ↗
34. Williams, W.E. (1971). A star-shaped crack deformed by an arbitrary internal pressure. International Journal of Engineering Science 9, 705-712.10.1016/0020-7225(71)90088-7 ↗