journal article·2024-06

A predictor for fatigue crack nucleation of single-network hydrogels considering water diffusion effect

Shan Gao, Heng Feng, Liying Jiang

International Journal of Fracture· Volume 246· Issue 2-3
Publisher page

Abstract

Owing to their excellent biocompatibility and capability of large deformation, hydrogels have attracted extensive attention for promising applications. When subjected to cyclic loads, hydrogels are susceptible to fatigue. To ensure their durability, it is crucial to have a deeper understanding on the fatigue mechanisms of hydrogels. However, there is a lack of study in the literature for predicting the fatigue damage of hydrogels under the coupling of large deformation and water diffusion. This work aims to formulate a fatigue life predictor for characterizing the crack nucleation of single-network hydrogels and unveil the effects of water diffusion on fatigue. Borrowing the concept of fatigue crack nucleation for rubber-like materials, the fatigue life predictor is developed within the framework of configurational mechanics. With the proposed predictor, the contributions of stretching and mixing to the fatigue damage of hydrogels are identified. Case studies with different swelling conditions are conducted to further distinguish various effects, including chemical potential, loading rate, and cyclic stretching amplitude, on both stretching and mixing induced damage. It is concluded that the fatigue damage accumulation in hydrogels under cyclic loading is the competing result of stretching and water diffusion. As the proposed predictor is capable of predicting the spatial fatigue damage of hydrogels, the current research can provide guidance on designing loading profiles to improve the fatigue life of hydrogels. In addition, by incorporating self-healing mechanism and multiphysics coupling, the proposed modeling framework can be further expanded to investigate the fatigue of other hydrogels, like double-network and stimuli-sensitive hydrogels.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Elasticity and Material Modeling · Textile materials and evaluations · Hydrogels: synthesis, properties, applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. Abraham F, Alshuth T, Jerrams S (2005) The effect of minimum stress and stress amplitude on the fatigue life of non strain crystallising elastomers. Mater Design 26:239–245. https://doi.org/10.1016/j.matdes.2004.02.02010.1016/j.matdes.2004.02.020 ↗
2. André N, Cailletaud G, Piques R (1999) Haigh diagram for fatigue crack initiation prediction of natural rubber components. Kautsch Gummi Kunstst 52:120–123
3. Andriyana A, Saintier N, Verron E (2010) Configurational mechanics and critical plane approach: concept and application to fatigue failure analysis of rubberlike materials. Int J Fatigue 32:1627–1638. https://doi.org/10.1016/j.ijfatigue.2010.03.00410.1016/j.ijfatigue.2010.03.004 ↗
4. Bai R, Yang Q, Tang J, Morelle XP, Vlassak J, Suo Z (2017) Fatigue fracture of tough hydrogels. Extreme Mech Lett 15:91–96. https://doi.org/10.1016/j.eml.2017.07.00210.1016/j.eml.2017.07.002 ↗
5. Bai R, Yang J, Morelle XP, Yang C, Suo Z (2018) Fatigue fracture of self-recovery hydrogels. ACS Macro Lett 7:312–317. https://doi.org/10.1021/acsmacrolett.8b0004510.1021/acsmacrolett.8b00045 ↗
6. Bathias C, Houel P, Berete YN, Legorju K (1998) Damage characterization of elastomeric composites using X-ray attenuation. In: Reifsnider KL, Dillard DA, Cardon AH (eds) Fatigue and fracture: progress in durability analysis of composite systems. Balkema, Rotterdam, pp 103–110
7. Baumberger T, Caroli C, Martina D (2006) Solvent control of crack dynamics in a reversible hydrogel. Nat Mater 5:552–555. https://doi.org/10.1038/nmat166610.1038/nmat1666 ↗
8. Bouklas N, Huang R (2012) Swelling kinetics of polymer gels: comparison of linear and nonlinear theories. Soft Matter 8:8194–8203. https://doi.org/10.1039/C2SM25467K10.1039/C2SM25467K ↗
9. Cadwell SM, Merrill RA, Sloman CM, Yost FL (1940) Dynamic fatigue life of rubber. Rubber Chem Technol 13:304–315. https://doi.org/10.5254/1.353951510.5254/1.3539515 ↗
10. Chadwick P (1975) Applications of an energy-momentum tensor in non-linear elastostatics. J Elastricity 5:249–258. https://doi.org/10.1007/BF0012698910.1007/BF00126989 ↗
11. Chester SA, Anand L (2010) A coupled theory of fluid permeation and large deformations for elastomeric materials. J Mech Phys Solids 58:1879–1906. https://doi.org/10.1016/j.jmps.2010.07.02010.1016/j.jmps.2010.07.020 ↗
12. Day JC, Robb ID (1981) Thermodynamic parameters of polyacrylamides in water. Polymer 22(11):1530–1533. https://doi.org/10.1016/0032-3861(81)90324-410.1016/0032-3861(81)90324-4 ↗
13. Duda FP, Souza AC, Fried E (2010) A theory for species migration in a finitely strained solid with application to polymer network swelling. J Mech Phys Solids 58:515–529. https://doi.org/10.1016/j.jmps.2010.01.00910.1016/j.jmps.2010.01.009 ↗
14. Duda FP, Souza AC, Fried E (2021) Fluid flow and interface motion in gels: a finite-strain theory and its application to a channel flow problem. J Mech Phys Solids 155:104566. https://doi.org/10.1016/j.jmps.2021.10456610.1016/j.jmps.2021.104566 ↗
15. Eshelby JD (1951) The force on an elastic singularity. Philos Trans R Soc A 244:87–112. https://doi.org/10.1098/rsta.1951.001610.1098/rsta.1951.0016 ↗
16. Eshelby JD (1970) Energy relations and the energy-momentum tensor in continuum mechanics. In: Kanninen MF (ed) Inelastic behaviour of solids. McGraw-Hill, New York, pp 77–115
17. Eshelby JD (1975) The elastic energy-momentum tensor. J Elasticity 5:321–335. https://doi.org/10.1007/BF0012699410.1007/BF00126994 ↗
18. Fielding JH (1943) Flex life and crystallization of synthetic rubber. Ind Eng Chem 35:1259–1261. https://doi.org/10.1021/ie50408a00810.1021/ie50408a008 ↗
19. Flory PJ (1942) Thermodynamics of high polymer solutions. J Chem Phys 10:51–61. https://doi.org/10.1063/1.172362110.1063/1.1723621 ↗
20. Flory PJ (1953) Principles of polymer chemistry. Cornell University Press, Ithaca
21. Flory PJ, Rehner J (1943) Statistical mechanics of cross-linked polymer networks II. Swelling J Chem Phys 11:521–526. https://doi.org/10.1063/1.172379110.1063/1.1723791 ↗
22. Gent AN, Lindley PB, Thomas AG (1964) Cut growth and fatigue of rubbers. I. The relationship between cut growth and fatigue. J Appl Polym Sci 8:455–466. https://doi.org/10.1002/app.1964.07008012910.1002/app.1964.070080129 ↗
23. Gerlach G, Arndt K-F (2010) Hydrogel sensors and actuators: engineering and technology. Springer, Berlin10.1007/978-3-540-75645-3 ↗
24. Greensmith HW (1963) Rupture of rubber. X. The change in stored energy on making a small cut in a test piece held in simple extension. J Polym Sci 7:993–1002. https://doi.org/10.1002/app.1963.07007031610.1002/app.1963.070070316 ↗
25. Gross D, Kolling S, Mueller R, Schmidt I (2003) Configurational forces and their application in solid mechanics. Eur J Mech A/Solids 22:669–692. https://doi.org/10.1016/S0997-7538(03)00076-710.1016/S0997-7538(03)00076-7 ↗
26. Gurtin ME (2000) Configurational forces as basic concept of continuum physics. Springer, Berlin
27. Hocine NA, Abdelaziz MN, Mesmacque G (1998) Experimental and numerical investigation on single specimen methods of determination of J in rubber materials. Int J Fract 94:321–338. https://doi.org/10.1023/A:100752000329410.1023/A:1007520003294 ↗
28. Hong W, Zhao X, Zhou J, Suo Z (2008) A theory of coupled diffusion and large deformation in polymeric gels. J Mech Phys Solids 56:1779–1793. https://doi.org/10.1016/j.jmps.2007.11.01010.1016/j.jmps.2007.11.010 ↗
29. Hong W, Liu Z, Suo Z (2009) Inhomogeneous swelling of a gel in equilibrium with a solvent and mechanical load. Int J Solids Struct 46:3282–3289. https://doi.org/10.1016/j.ijsolstr.2009.04.02210.1016/j.ijsolstr.2009.04.022 ↗
30. Hu J, Toh W, Ng TY et al (2021) Inhomogeneous large deformation study on magneto-thermal sensitive hydrogels. Int J Appl Mech 13(05):2150053. https://doi.org/10.1142/S175882512150053810.1142/S1758825121500538 ↗
31. Hua M, Wu S, Ma Y et al (2021) Strong tough hydrogels via the synergy of freeze-casting and salting out. Nature 590:594–599. https://doi.org/10.1038/s41586-021-03212-z10.1038/s41586-021-03212-z ↗
32. Huggins ML (1941) Solutions of long chain compounds. J Chem Phys 9:440–440. https://doi.org/10.1063/1.175093010.1063/1.1750930 ↗
33. Kang MK, Huang R (2010) A variational approach and finite element implementation for swelling of polymeric hydrogels under geometric constraints. J Appl Mech 77(6):061004. https://doi.org/10.1115/1.400171510.1115/1.4001715 ↗
34. Kienzler R, Herrmann G (1997) On the properties of the Eshelly tensor. Acta Mech 125:73–91. https://doi.org/10.1007/BF0117730010.1007/BF01177300 ↗
35. Klenke D, Beste A (1987) Ensurance of the fatigue life of metal-rubber components. Kautschuk Und Gummi Kunststoffe 40(11):1067–1071
36. Lee JH, Jeong HY (2014) Fatigue life prediction of solder joints with consideration of frequency, temperature and cracking energy density. Int J Fatigue 61:264–270. https://doi.org/10.1016/j.ijfatigue.2013.10.02110.1016/j.ijfatigue.2013.10.021 ↗
37. Lee MP, Moet A (1993) Analysis of fatigue crack propagation in NR/BR rubber blend. Rubber Chem Technol 66:304–316. https://doi.org/10.5254/1.353831410.5254/1.3538314 ↗
38. Lee Y, Song WJ, Sun JY (2020) Hydrogel soft robotics. Mater Today Phys 15:100258. https://doi.org/10.1016/j.mtphys.2020.10025810.1016/j.mtphys.2020.100258 ↗
39. Lei H, Dong L, Li Y et al (2020) Stretchable hydrogels with low hysteresis and anti-fatigue fracture based on polyprotein cross-linkers. Nat Commun 11:4032. https://doi.org/10.1038/s41467-020-17877-z10.1038/s41467-020-17877-z ↗
40. Lin S, Liu J, Liu X, Zhao X (2019a) Muscle-like fatigue-resistant hydrogels by mechanical training. Proc Natl Acad Sci USA 116(21):10244–1024910.1073/pnas.1903019116 ↗
41. Lin S, Liu X, Liu J et al (2019b) Anti-fatigue-fracture hydrogels. Sci Adv 5:8528–3010.1126/sciadv.aau8528 ↗
42. Lindley PB (1973) Relation between hysteresis and the dynamic crack growth resistance of natural rubber. Int J Fract 9:449–462. https://doi.org/10.1007/BF0003632510.1007/BF00036325 ↗
43. Liu D, Ma S, Yuan H, Markert B (2022) Computational modelling of poro-visco-hyperelastic effects on time-dependent fatigue crack growth of hydrogels. Int J Plast 155:103307. https://doi.org/10.1016/j.ijplas.2022.10330710.1016/j.ijplas.2022.103307 ↗
44. Marcombe R, Cai S, Hong W et al (2010) A theory of constrained swelling of a pH-sensitive hydrogel. Soft Matter 6(4):784–793. https://doi.org/10.1039/B917211D10.1039/B917211D ↗
45. Mars WV (2002) Cracking energy density as a predictor of fatigue life under multiaxial conditions. Rubber Chem Technol 75(1):1–17. https://doi.org/10.5254/1.354767010.5254/1.3547670 ↗
46. Mars WV, Fatemi A (2002) A Literature Survey on Fatigue Analysis Approaches for Rubber. Int J Fatigue 24:949–961. https://doi.org/10.1016/S0142-1123(02)00008-710.1016/S0142-1123(02)00008-7 ↗
47. Maugin GA (1993) Non-equilibrium thermodynamics of electromagnetic solids. Springer, Vienna10.1007/978-3-7091-4321-6_4 ↗
48. Maugin GA (1995) Material forces: concepts and applications. Appl Mech Rev 48:213–245. https://doi.org/10.1115/1.300510110.1115/1.3005101 ↗
49. Maugin GA (1999) The thermodynamics of nonlinear irreversible behaviors: an introduction, series A, vol 27. World Scientific series on nonlinear science. World Scientific, Singapore10.1142/9789812796271 ↗
50. Maugin GA (2002) Material mechanics of materials. Theor Appl Mech 27:1–12. https://doi.org/10.2298/TAM0227001G10.2298/TAM0227001G ↗
51. Mullins L (1959) Rupture of rubber. IX. Role of hysteresis in the tearing of rubber. Trans Inst Rubber Ind 35:213–222
52. Nguyen TD, Govindjee S, Klein PA, Gao H (2005) A material force method for inelastic fracture mechanics. J Mech Phys Solids 53:91–121. https://doi.org/10.1016/j.jmps.2004.06.01010.1016/j.jmps.2004.06.010 ↗
53. Nyaaba W, Frimpong S, Anani A (2019) Fatigue damage investigation of ultra-large tire components. Int J Fatigue 119:247–260. https://doi.org/10.1016/j.ijfatigue.2018.07.00910.1016/j.ijfatigue.2018.07.009 ↗
54. Okumura D, Inagaki T, Ohno N (2015) Effect of prestrains on swelling-induced buckling patterns in gel films with a square lattice of holes. Int J Solids Struct 58:288–300. https://doi.org/10.1016/j.ijsolstr.2015.01.01510.1016/j.ijsolstr.2015.01.015 ↗
55. Orwoll RA, Arnold PA (2007) Polymer–solvent interaction parameter. In: Mark JE (ed) Physical properties of polymers handbook. Springer, New York, pp 233–25710.1007/978-0-387-69002-5_14 ↗
56. Rajagopal KR, Srinivasa AR (2005) On the role of the Eshelby energy-momentum tensor in materials with multiple natural configurations. Math Mech Solids 10:3–24. https://doi.org/10.1177/108128650503561110.1177/1081286505035611 ↗
57. Rice JR (1968) A path independent integral and the approximate analysis of strain concentration by notches and cracks. J Appl Mech 35:379–386. https://doi.org/10.1115/1.360120610.1115/1.3601206 ↗
58. Rivlin RS, Thomas AG (1953) Rupture of rubber. I. Characteristic energy for tearing. J Polym Sci 10:291–318. https://doi.org/10.1002/pol.1953.12010030310.1002/pol.1953.120100303 ↗
59. Ro HS (1989) Modeling and interpretation of fatigue failure initiation in rubber related to pneumatic tires. PhD thesis, Purdue University
60. Roach JF (1982) Crack growth in elastomers under biaxial stresses. PhD thesis, University of Akron
61. Roberts BJ, Benzies JB (1977) The relationship between uniaxial and equibiaxial fatigue in gum and carbon black filled vulcanizates. Proc Rubbercon 77:1–13
62. Sackett SD, Tremmel DM, Ma F et al (2018) Extracellular matrix scaffold and hydrogel derived from decellularized and delipidized human pancreas. Sci Rep 8:10452. https://doi.org/10.1038/s41598-018-28857-110.1038/s41598-018-28857-1 ↗
63. Saintier N, Cailletaud G, Piques R (2006) Crack initiation and propagation under multiaxial fatigue in a natural rubber. Int J Fatigue 28:61–72. https://doi.org/10.1016/j.ijfatigue.2005.03.00610.1016/j.ijfatigue.2005.03.006 ↗
64. Song Y, Nagai N, Saijo S, Kaji H, Nishizawa M, Abe T (2018) In situ formation of injectable chitosan-gelatin hydrogels through double crosslinking for sustained intraocular drug delivery. Mater Sci Eng C 88:1–12. https://doi.org/10.1016/j.msec.2018.02.02210.1016/j.msec.2018.02.022 ↗
65. Steinmann P (2000) Application of material forces to hyperelastostatic fracture mechanics. I. Continuum mechanical setting. Int J Solids Struct 37:7371–7391. https://doi.org/10.1016/S0020-7683(00)00203-110.1016/S0020-7683(00)00203-1 ↗
66. Steinmann P (2002) On spatial and material settings of hyperelastostatic crystal defects. J Mech Phys Solids 50:1743–1766. https://doi.org/10.1016/S0022-5096(01)00135-110.1016/S0022-5096(01)00135-1 ↗
67. Sun JY, Keplinger C, Whitesides GM, Suo Z (2014) Ionic skin. Adv Mater 26:7608–7614. https://doi.org/10.1002/adma.20140344110.1002/adma.201403441 ↗
68. Tang J, Li J, Vlassak JJ, Suo Z (2017) Fatigue fracture of hydrogels. Extreme Mech Lett 10:24–31. https://doi.org/10.1016/j.eml.2016.09.01010.1016/j.eml.2016.09.010 ↗
69. Thomas AG (1955) Rupture of rubber. II. The strain concentration at an inclusion. J Polym Sci 18:177–188. https://doi.org/10.1002/pol.1955.12018880210.1002/pol.1955.120188802 ↗
70. Thomas AG (1958) Rupture of rubber. V. Cut growth in natural rubber vulcanizates. J Polym Sci 31:467–480. https://doi.org/10.1002/pol.1958.120311232410.1002/pol.1958.1203112324 ↗
71. Thomas AG (1960) Rupture of rubber. VI. Further experiments on the tear criterion. J Polym Sci 3:168–174. https://doi.org/10.1002/app.1960.07003080510.1002/app.1960.070030805 ↗
72. Verron E, Andriyana A (2008) Definition of a new predictor for multiaxial fatigue crack nucleation in rubber. J Mech Phys Solids 56:417–443. https://doi.org/10.1016/j.jmps.2007.05.01910.1016/j.jmps.2007.05.019 ↗
73. Verron E, Le Cam JB, Gornet L (2006) A multiaxial criterion for crack nucleation in rubber. Mech Res Commun 33:493–498. https://doi.org/10.1016/j.mechrescom.2005.06.00110.1016/j.mechrescom.2005.06.001 ↗
74. Wang X, Hong W (2012) Delayed fracture in gels. Soft Matter 8(31):8171–8178. https://doi.org/10.1039/C2SM25553G10.1039/C2SM25553G ↗
75. Wöhler A (1867) Wöhler’s experiments on the strength of metals. Engineering 2:160–161
76. Xiang C, Wang Z, Yang C, Yao X, Wang Y, Suo Z (2020) Stretchable and fatigue-resistant materials. Mater Today 34:7–16. https://doi.org/10.1016/j.mattod.2019.08.00910.1016/j.mattod.2019.08.009 ↗
77. Yang Y, Guo H, Du Z, Hong W, Lu T, Wang T (2022) Rate-dependent fracture of hydrogels due to water migration. J Mech Phys Solids 167:105007. https://doi.org/10.1016/j.jmps.2022.10500710.1016/j.jmps.2022.105007 ↗
78. Young DG (1990) Application of fatigue methods based on fracture mechanics for tire compound development. Rubber Chem Technol 63:567–581. https://doi.org/10.5254/1.353827410.5254/1.3538274 ↗
79. Zhang W, Liu X, Wang J, Tang J, Hu J, Lu T, Suo Z (2018a) Fatigue of double-network hydrogels. Eng Fract Mech 187:74–93. https://doi.org/10.1016/j.engfracmech.2017.10.01810.1016/j.engfracmech.2017.10.018 ↗
80. Zhang E, Bai R, Morelle XP, Suo Z (2018b) Fatigue fracture of nearly elastic hydrogels. Soft Matter 14:3563–3571. https://doi.org/10.1039/C8SM00460A10.1039/C8SM00460A ↗
81. Zhang N, Pan Z, Lei J, Liu Z (2018c) Effects of temperature on the fracture and fatigue damage of temperature sensitive hydrogels. RSC Adv 8:31048–31054. https://doi.org/10.1039/C8RA06518G10.1039/C8RA06518G ↗
82. Zhao X, Wu J, Zhou Y, Pan Y, Lu T, Song X, Hu J (2021) Fatigue behaviors of physical hydrogels based on hydrogen bonds. Extreme Mech Lett 46:101320. https://doi.org/10.1016/j.eml.2021.10132010.1016/j.eml.2021.101320 ↗
83. Zhou J, Jiang L (2018) Development of a predictor for fatigue crack nucleation of dielectric viscoelastomers under electromechanical loads. J Mech Phys Solids 119:400–41610.1016/j.jmps.2018.07.012 ↗
84. Zine A, Benseddiq N, Abdelaziz MN, Hocine NA, Bouami D (2006) Prediction of rubber fatigue life under multiaxial loading. Fatigue Fract Eng Mater Struct 29:267–278. https://doi.org/10.1111/j.1460-2695.2005.00989.x10.1111/j.1460-2695.2005.00989.x ↗