The differences of damage initiation and accumulation of DP steels: a numerical and experimental analysis
Source abstract
Abstract
Abstract Many studies have examined the damage behaviour of dual-phase steels already. It is a topic of high interest, since understanding the mechanisms of damage during forming processes enables the production of steels with improved properties and damage tolerance. However, the focus was rarely on the comparison between representatives of this steel class, and the numerical simulation for the quantification of damage states was not thoroughly used. Therefore, this study compares the damage initiation and accumulation of two dual-phase steels (DP800 and DP1000), which are used in the automotive industry. Additionally, parameter sets of a phenomenological damage mechanics model with coupled damage evolution are calibrated for each material. The combined analysis reveals an earlier initiation of damage for the DP800, where the damage accumulation phase is prolonged. For DP1000 the damage nucleates only shortly before material failure. The material model is able to correctly predict the behaviour, while experimental analysis confirms the prediction via light optical and SEM metallography.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Ahmad E, Manzoor T, Ali KL, Akhter JI (2000) Effect of microvoid formation on the tensile properties of dual-phase steel. J Mater Eng Perform 9(3):306–31010.1361/105994900770345962 ↗
2. Avramovic-Cingara G, Ososkov Y, Jain MK, Wilkinson DS (2009) Effect of martensite distribution on damage behaviour in dp600 dual phase steels. Mater Sci Eng A 516:7–1610.1016/j.msea.2009.03.055 ↗
3. Bai Y, Wierzbicki T (2008) A new model of metal plasticity and fracture with pressure and lode dependence. Int J Plast 24:1071–109610.1016/j.ijplas.2007.09.004 ↗
4. Besson J (2010) Continuum models of ductile fracture: a review. Int J Damage Mech 19(1):3–52. https://doi.org/10.1177/105678950910348210.1177/1056789509103482 ↗
5. Bieler TR, Eisenlohr P, Roters F, Kumar D, Mason DE, Crimp MA, Raabe D (2009) The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals. Int J Plast 25(9):1655–1683. https://doi.org/10.1016/j.ijplas.2008.09.00210.1016/j.ijplas.2008.09.002 ↗
6. Børvik T, Hopperstad O, Berstad T, Langseth M (2001) A computational model of viscoplasticity and ductile damage for impact and penetration. Eur J Mech A Solids 20(5):685–712. https://doi.org/10.1016/S0997-7538(01)01157-310.1016/S0997-7538(01)01157-3 ↗
7. Bouchard PO, Bourgeon L, Fayolle S, Mocellin K (2011) An enhanced lemaitre model formulation for materials processing damage computation. Int J Mater Form 4(3):299–315. https://doi.org/10.1007/s12289-010-0996-510.1007/s12289-010-0996-5 ↗
8. Davies RG, Magee CL (1979) Physical metallurgy of automotive high-strength steels. J Metals 31(11):17–23. https://doi.org/10.1007/BF0335456510.1007/BF03354565 ↗
9. Ghadbeigi H, Pinna C, Celotto S, Yates JR (2010) Local plastic strain evolution in a high strength dual-phase steel. Mater Sci Eng A 527:5026–503210.1016/j.msea.2010.04.052 ↗
10. Ghadbeigi H, Pinna C, Celotto S (2013) Failure mechanisms in dp600 steel: initiation, evolution and fracture. Mater Sci Eng A 588:420–431. https://doi.org/10.1016/j.msea.2013.09.04810.1016/j.msea.2013.09.048 ↗
11. Gurson AL (1977) Continuum theory of ductile rupture by void nucleation and growth: part I—yield criteria and flow rules for porous ductile media. J Eng Mater Technol 99(1):2. https://doi.org/10.1115/1.344340110.1115/1.3443401 ↗
12. He XJ, Terao N, Berghezan A (1984) Influence of martensite morphology and its dispersion on mechanical properties and fracture mechanisms of fe-mn-c dual phase steels. Metal Sci 18(7):367–373. https://doi.org/10.1179/03063458479041995310.1179/030634584790419953 ↗
13. Hering O, Dunlap A, Tekkaya A, Aretz A, Schwedt A (2019) Characterization of damage in forward rod extruded parts. Int J Mater Form. https://doi.org/10.1007/s12289-019-01525-z10.1007/s12289-019-01525-z ↗
14. Johnson GR, Cook WH (1985) Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng Frac Mech 21(1):31–48. https://doi.org/10.1016/0013-7944(85)90052-910.1016/0013-7944(85)90052-9 ↗
15. Kadkhodapour J, Butz A, Ziaei Rad S (2011) Mechanisms of void formation during tensile testing in a commercial, dual-phase steel. Acta Mater 59:2575–258810.1016/j.actamat.2010.12.039 ↗
16. Keim V, Nonn A, Münstermann S (2019) Application of the modified bai-wierzbicki model for the prediction of ductile fracture in pipelines. Int J Press Vessels Piping 171:104–116. https://doi.org/10.1016/j.ijpvp.2019.02.01010.1016/j.ijpvp.2019.02.010 ↗
17. Lemaitre J (1985) A continuous damage mechanics model for ductile fracture. J Eng Mater Technol 107:83–8910.1115/1.3225775 ↗
18. Lemaitre J (1992) A course on damage mechanics. Springer Verlag, Berlin10.1007/978-3-662-02761-5 ↗
19. Lian J, Sharaf M, Archie F, Münstermann S (2013) A hybrid approach for modelling of plasticity and failure behaviour of advanced high-strength steel sheets. Int J Damage Mech 22(2):188–21810.1177/1056789512439319 ↗
20. Lian J, Yang H, Vajragupta N, Münstermann S, Bleck W (2014) A method to quantitatively upscale the damage initiation of dual-phasesteels under various stress states from microscale to macroscale. Comput Mater Sci 94:245–25710.1016/j.commatsci.2014.05.051 ↗
21. Liu W, Lian J, Münstermann S, Zeng C, Fang X (2020) Prediction of crack formation in the progressive folding of square tubes during dynamic axial crushing. Int J Mech Sci 176:105534. https://doi.org/10.1016/j.ijmecsci.2020.10553410.1016/j.ijmecsci.2020.105534 ↗
22. Maire E, Bouaziz O, Di Michiel M, Verdu C (2008) Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography. Acta Mater 56:4954–496410.1016/j.actamat.2008.06.015 ↗
23. Marteau J, Haddadi H, Bouvier S (2013) Investigation of strain heterogeneities between grains in ferritic and ferritic-martensitic steels. Exp Mech 53(3):427–439. https://doi.org/10.1007/s11340-012-9657-610.1007/s11340-012-9657-6 ↗
24. Meya R, Kusche C, Löbbe C, Al-Samman T, Korte-Kerzel S, Tekkaya A (2019) Global and high-resolution damage quantification in dual-phase steel bending samples with varying stress states. Metals. https://doi.org/10.3390/met903031910.3390/met9030319 ↗
25. Mu L, Jia Z, Ma Z, Shen F, Sun Y, Yang Y (2020) A theoretical prediction framework for the construction of a fracture forming limit curve accounting for fracture pattern transition. Int J Plast. https://doi.org/10.1016/j.ijplas.2020.10270610.1016/j.ijplas.2020.102706 ↗
26. Münstermann S, Lian J, Pütz F, Könemann M, Brinnel V (2017) Comparative study on damage evolution during sheet metal forming of steels dp600 and dp1000. J Phys: Conference Series 89610.1088/1742-6596/896/1/012074 ↗
27. Novokshanov D, Döbereiner B, Sharaf M, Münstermann S (2015) A new model for upper shelf impact toughness assessment with a computationally efficient parameter identification algorithm. Eng Fract Mech 148:281–30310.1016/j.engfracmech.2015.07.069 ↗
28. Papasidero J, Doquet V, Mohr D (2015) Ductile fracture of aluminum 2024–t351 under proportional and non-proportional multi-axial loading: Bao-wierzbicki results revisited. Int J Solids Struct 69–70:459–474. https://doi.org/10.1016/j.ijsolstr.2015.05.00610.1016/j.ijsolstr.2015.05.006 ↗
29. Park K, Nishiyama M, Nakada N, Tsuchiyama T, Takaki S (2014) Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel. Mater Sci Eng A 604:135–141. https://doi.org/10.1016/j.msea.2014.02.05810.1016/j.msea.2014.02.058 ↗
30. Ramazani A, Schwedt A, Aretz A, Prahl U, Bleck W (2013) Characterization and modelling of failure initiation in dp steel. Comput Mater Sci 75:35–4410.1016/j.commatsci.2013.04.001 ↗
31. Rueden CT, Schindelin J, Hiner MC, DeZonia BE, Walter AE, Arena ET, Eliceiri KW (2017) Imagej2: Imagej for the next generation of scientific image data. BMC Bioinform 18(1):529, https://doi.org/10.1186/s12859-017-1934-z, journal Article, arXiv:2918.716510.1186/s12859-017-1934-z ↗
32. Saai A, Hopperstad OS, Granbom Y, Lademo OG (2014) Influence of volume fraction and distribution of martensite phase on the strain localization in dual phase steels. Procedia Mater Sci 3:900–905. https://doi.org/10.1016/j.mspro.2014.06.14610.1016/j.mspro.2014.06.146 ↗
33. Schindelin J, Arganda-Carreras I, Frise E, Kaynig V, Longair M, Pietzsch T, Preibisch S, Rueden C, Saalfeld S, Schmid B, Tinevez JY, White DJ, Hartenstein V, Eliceiri K, Tomancak P, Cardona A (2012) Fiji: an open-source platform for biological-image analysis. Nature methods 9(7):676–682, https://doi.org/10.1038/nmeth.2019, journal Article Research Support, N.I.H., Extramural Research Support, Non-U.S. Gov’t, arXiv:2274.377210.1038/nmeth.2019 ↗
34. Schowtjak A, Wang S, Hering O, Clausmeyer T, Lohmar J, Schulte R, Ostwald R, Hirt G, Tekkaya A (2019) Prediction and analysis of damage evolution during caliber rolling and subsequent cold forward extrusion. Prod Eng. https://doi.org/10.1007/s11740-019-00935-x10.1007/s11740-019-00935-x ↗
35. Shen F, Münstermann S, Lian J (2020) Investigation on the ductile fracture of high-strength pipeline steels using a partial anisotropic damage mechanics model. Eng Frac Mech 227:106900. https://doi.org/10.1016/j.engfracmech.2020.10690010.1016/j.engfracmech.2020.106900 ↗
36. Shen HP, Lei TC, Liu JZ (1986) Microscopic deformation behaviour of martensitic-ferritic dual-phase steels. Mater Sci Technol 2(1):28–33. https://doi.org/10.1179/mst.1986.2.1.2810.1179/mst.1986.2.1.28 ↗
37. Tasan CC, Hoefnagels J, Geers M (2010) Microstructural banding effects clarified through micrographic digital image correlation. Scripta Mater 62(11):835–838. https://doi.org/10.1016/j.scriptamat.2010.02.01410.1016/j.scriptamat.2010.02.014 ↗
38. Tasan CC, Diehl M, Yan D, Zambaldi C, Shanthraj P, Roters F, Raabe D (2014a) Integrated experimental-simulation analysis of stress and strain partitioning in multiphase alloys. Acta Mater 81:386–400. https://doi.org/10.1016/j.actamat.2014.07.07110.1016/j.actamat.2014.07.071 ↗
39. Tasan CC, Hoefnagels J, Diehl M, Yan D, Roters F, Raabe D (2014b) Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations. Int J Plast 63:198–210. https://doi.org/10.1016/j.ijplas.2014.06.00410.1016/j.ijplas.2014.06.004 ↗
40. Tasan CC, Diehl M, Yan D, Bechtold M, Roters F, Schemmann L, Zheng C, Peranio N, Ponge D, Koyama M, Tsuzaki K, Raabe D (2015) An overview of dual-phase steels: advances in microstructure-oriented processing and micromechanically guided design. Ann Rev Mater Res 45(1):391–431. https://doi.org/10.1146/annurev-matsci-070214-02110310.1146/annurev-matsci-070214-021103 ↗
41. Tekkaya AE, Ben Khalifa N, Hering O, Meya R, Myslicki S, Walther F (2017) Forming-induced damage and its effects on product properties. CIRP Ann 66(1):281–284. https://doi.org/10.1016/j.cirp.2017.04.11310.1016/j.cirp.2017.04.113 ↗
42. Tvergaard V (1981) Influence of voids on shear band instabilities under plane strain conditions. Int J Frac 17(4):389–407. https://doi.org/10.1007/BF0003619110.1007/BF00036191 ↗
43. Tvergaard V, Needleman A (1984) Analysis of the cup-cone fracture in a round tensile bar. Acta Metall 32(1):157–169. https://doi.org/10.1016/0001-6160(84)90213-X10.1016/0001-6160(84)90213-X ↗
44. West O, Lian J, Münstermann S, Bleck W (2012) Numerical determination of the damage parameters of a dual-phase sheet steel. ISIJ Int 52(4):743–752. https://doi.org/10.2355/isijinternational.52.74310.2355/isijinternational.52.743 ↗
45. Wu B, Li X, Di Y, Brinnel V, Lian J, Münstermann S (2017) Extension of the modified bai-wierzbicki model for predicting ductile fracture under complex loading conditions. Fatigue Frac Eng Mater Struct 40(12):2152–216810.1111/ffe.12645 ↗