Mode-I crack problem for functionally graded layered structures
Source abstract
Abstract
This paper deals with two bonded functionally graded finite strips with two collinear cracks. Different layers may have different nonhomogeneity properties in the structure. A bi-parameter exponential function was introduced to simulate the continuous variation of material properties. The problem is solved by using the integral transform, singular integral equation methods and the theory of residues. Various internal cracks and edge crack and crack crossing the interface configurations are investigated, respectively. The asymptotic stress field near the tip of a crack crossing the interface is examined and it is shown that, unlike the corresponding stress field in piecewise homogeneous materials, in this case the “kink” in material property at the interface does not introduce any singularity. Numerical calculations are carried out, and the influences of nonhomogeneity constants, geometric parameters and crack interactions on the stress intensity factors are investigated.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Numerical methods in engineering · Composite Structure Analysis and Optimization · Composite Material Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Aboudi J, Arnold SM, Pindera MJ (1994) Response of functionally graded composites to thermal gradients. Compos Eng 4: 1–1810.1016/0961-9526(94)90003-5 ↗
2. Chen J (2005) Determination of thermal stress intensity factors for an interface crack in a graded orthotropic coating–substrate structure. Int J Fract 133: 303–32810.1007/s10704-005-4728-7 ↗
3. Choi HJ (2007) Stress intensity factors for an oblique edge crack a coating/substrate system with a graded interfacial zone under antiplane shear. Eur J Mech A-Solids 26: 337–34710.1016/j.euromechsol.2006.06.004 ↗
4. Choi HJ, Paulino GH (2008) Thermoelastic contact mechanics for a flat punch sliding over a graded coating/substrate system with frictional heat generation. J Mech Phys Solids 56: 1673–169210.1016/j.jmps.2007.07.011 ↗
5. Cook TS, Erdogan F (1972) Stresses in bonded materials with a crack perpendicular to the interface. Int J Eng Sci 10: 677–69710.1016/0020-7225(72)90063-8 ↗
6. Dag S, Erdogan F (2002) A surface crack in a graded medium under general loading conditions. J Appl Mech 69: 580–58810.1115/1.1488661 ↗
7. Delale F, Erdogan F (1983) The crack problem for a nonhomogeneous plane. J Appl Mech 50: 609–61410.1115/1.3167098 ↗
8. Delale F, Erdogan F (1988) On the mechanical modeling of the interfacial region in bonded half-planes. J Appl Mech 55: 317–32410.1115/1.3173677 ↗
9. Ding SH, Li X (2008a) An anti-plane shear crack in bonded functionally graded piezoelectric materials under electromechanical loading. Comp Mater Sci 43: 337–34410.1016/j.commatsci.2007.11.009 ↗
10. Ding SH, Li X (2008b) Periodic cracks in a functionally graded piezoelectric layer bonded to a piezoelectric half-plane. Theor Appl Fract Mech 49: 313–32010.1016/j.tafmec.2008.02.002 ↗
11. Erdogan F, Gupta GD, Cook TS (1973) Numerical solution of singular integral equations. In: Sih GC (ed) Mechanics of fracture l: mehtod of analysis and solution of crack problem, Chapter 7. Noordhoff International Publishing, Leyden, The Netherlands
12. Erdogan F (1985) The crack problem for bonded nonhomogeneous materials under antiplane shear loading. J Appl Mech 52: 823–82810.1115/1.3169153 ↗
13. Erdogan F, Kaya AC, Joseph PF (1991) The mode III crack problem in bonded materials with a nonhomogeneous interfacial zone. J Appl Mech 58: 419–42710.1115/1.2897202 ↗
14. Erdogan F, Wu BH (1996) Crack problem in functionally graded material layers under thermal stresses. J Therm Stress 19: 237–26510.1080/01495739608946172 ↗
15. Erdogan F, Wu BH (1997) The surface crack problem for a plate with functionally graded properties. J Appl Mech 64: 449–45610.1115/1.2788914 ↗
16. Guo LC, Wu LZ, Ma L, Zeng T (2004a) Fracture analysis of a functionally graded coating-substrate structure with a crack perpendicular to the interface—Part I: Static problem. Int J Frac 127: 21–3810.1023/B:FRAC.0000035049.26772.2d ↗
17. Guo LC, Wu LZ, Zeng T, Ma L (2004b) Mode I crack problem for a functionally graded orthotropic strip. Eur J Mech A-Solids 23: 219–23410.1016/j.euromechsol.2003.12.006 ↗
18. Guo LC, Noda N (2008) Fracture mechanics analysis of functionally graded layered structures with a crack crossing the interface. Mech Mater 40: 81–9910.1016/j.mechmat.2007.06.005 ↗
19. Han JC, Wang BL (2006) Thermal shock resistance enhancement of functionally graded materials by multiple cracking. Acta Mater 54: 963–97310.1016/j.actamat.2005.10.036 ↗
20. Hsueh CH, Leeb S (2003) Modeling of elastic thermal stresses in two materials joined by a graded layer. Compos Part B-Eng 34: 747–75210.1016/S1359-8368(03)00088-X ↗
21. Kim JH, Paulino GH (2002) Mixed-mode fracture of orthotropic functionally graded material using finite element and the modified crack closure method. Eng Fract Mech 69: 1557–158610.1016/S0013-7944(02)00057-7 ↗
22. Kim JH, Paulino GH (2003) Mixed-mode J-Integral formulation and implementation using finite element for fracture analysis of nonhomogeneous orthotropic material. Mech Mater 35: 107–12810.1016/S0167-6636(02)00159-X ↗
23. Konda N, Erdogan F (1994) The mixed mode crack problem in a nonhomogeneous elastic medium. Eng Fract Mech 47: 533–54510.1016/0013-7944(94)90253-4 ↗
24. Li YD, Lee KY (2007) An anti-plane crack perpendicular to the weak/micro-discontinuous interface in a bi-FGM structure with exponential and linear non-homogeneities. Int J Frac 146: 203–21110.1007/s10704-007-9161-7 ↗
25. Ma L, Wu LZ, Guo LC, Zhou ZG (2005) Dynamic behavior of a finite crack in the functionally graded materials. Mech Mater 37: 1153–116510.1016/j.mechmat.2005.05.004 ↗
26. Muskelishvili IN (1953) Singular Integral Equations. Noordhoff, Groningen
27. Ueda S, Shindo Y (2000) Cracking in functionally graded materials due to an initial strain resulting from stress relation. J Therm Stress 23: 285–29010.1080/014957300280452 ↗
28. Zhou ZG, Wang B, Sun YG (2004) Investigation of the dynamic behavior of a finite crack in the functionally graded materials by use of the Schmidt method. Wave Motion 39: 213–22510.1016/j.wavemoti.2003.09.001 ↗
29. Zuiker J, Dvorak G (1994) The effective properties of functinally graded composites-I. Extension of the Mori-Tanaka method to linearly varying fields. Compos Eng 4: 19–3510.1016/0961-9526(94)90004-3 ↗