Tensile fracture initiation and propagation of granite and gneiss at wedge splitting tests: Part 1—Effect of notch type on tensile crack initiation and fracture mechanics results
Source abstract
Abstract
Abstract Wedge splitting tests were conducted on a granite and a gneiss with similar mineralogy but different microstructure. The basic properties of the two rock types were characterized by petrographic analyses and mechanical tests. The granite specimens were split in one material direction, perpendicular to the rift plane, and the gneiss specimens were split in three different material directions, parallel and perpendicular to the foliation (and along and across a lineation). The effect of having a large blunt versus a sharp notch on the crack initiation was studied in the granite. The wedge splitting tests are unconventional for testing rocks and allowed to study the crack initiation and propagation under mode I loading condition in the quasi-brittle granite and brittle gneiss. The fracture energy and strain energy release rate were calculated. The strain energy release rate for gneiss, when splitting along and across the foliation, was around 45% and 60% of the values for the structurally isotropic granite. The fracture toughness was calculated from the strain energy release rate and was larger than corresponding values obtained from linear elastic fracture mechanics (LEFM). There was an effect on the early cracking stages by using a sharp notch compared with using a large blunt notch on the granite specimens, but the required largest force to split the specimens remained the same for the two notch types. The crack initiation started at a splitting force corresponding to 78% and 90% of the maximum splitting force on the specimens with a sharp notch and a large blunt notch, respectively. The results with a full force-displacement response during the crack propagation obtained for the brittle gneiss are unique. Most fracture mechanics results on rock materials are obtained from standard tests and LEFM and not via the measured strain energy release rate.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Geotechnical and Geomechanical Engineering · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Åkesson U, Stigh J, Lindqvist JE et al (2003) The influence of foliation on the fragility of granitic rocks, image analysis and quantitative microscopy. Eng Geol 68(3–4):275–288. https://doi.org/10.1016/S0013-7952(02)00233-810.1016/S0013-7952(02)00233-8 ↗
2. Almeida LCR, Vargas EA Jr, de Figueiredo RP (2006) Mechanical characterization of rock splitting planes in granitic rocks. Int J Rock Mech Min Sci 43(7):1139–1145. https://doi.org/10.1016/j.ijrmms.2006.03.01410.1016/j.ijrmms.2006.03.014 ↗
3. Anders MH, Laubach SE, Scholz CH (2014) Microfractures: A review. J Struct Geol 69, Part B:377–394. https://doi.org/10.1016/j.jsg.2014.05.01110.1016/j.jsg.2014.05.011 ↗
4. ASTM (2004) D3967-95a, Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens. ASTM International, West Conshohocken, PA
5. Barenblatt G (1959) General ideas and hypotheses. Axially-symmetric cracks. The formation of equilibrium cracks during brittle fracture. J Appl Math Mech 23(3):622–636. https://doi.org/10.1016/0021-8928(59)90157-110.1016/0021-8928(59)90157-1 ↗
6. Berčáková A, Melichar R, Obara Y et al (2017) Evaluation of anisotropy of fracture toughness in brittle rock, migmatized gneiss. Procedia Engineering 191:900–907. https://doi.org/10.1016/j.proeng.2017.05.26010.1016/j.proeng.2017.05.260 ↗
7. Broberg KB (1999) Cracks and Fracture. Academic Press, San Diego,. https://doi.org/10.1016/B978-012134130-5/50001-510.1016/B978-012134130-5/50001-5 ↗
8. Brühwiler E, Wittmann F (1990) The wedge splitting test, a new method of performing stable fracture mechanics tests. Eng Fract Mech 35(1):117–125. https://doi.org/10.1016/0013-7944(90)90189-N10.1016/0013-7944(90)90189-N ↗
9. CEN (2004) EN 14158:2004 Natural stone test methods. Determination of rupture energy, CEN, Brussels
10. CEN (2006) EN 12372:2006 Natural stone test methods. Determination of flexural strength under concentrated load, CEN, Brussels
11. Chen B, Xie L, Zhang Y et al (2023) Study on the developmental characteristics and mechanism of shale FPZs. Theoret Appl Fract Mech 124:103814. https://doi.org/10.1016/j.tafmec.2023.10381410.1016/j.tafmec.2023.103814 ↗
12. Chengyong W, Peide L, Rongsheng H et al (1990) Study of the fracture process zone in rock by laser speckle interferometry. Int J Rocks Mech Min Sci Geomech Abstr 27(1):65–69. https://doi.org/10.1016/0148-9062(90)90010-Y10.1016/0148-9062(90)90010-Y ↗
13. Dupré JC, Doumalin P, Belrhiti Y et al (2018) Detection of cracks in refractory materials by an enhanced digital image correlation technique. J Mater Sci 53(2):977–993. https://doi.org/10.1007/s10853-017-1550-310.1007/s10853-017-1550-3 ↗
14. Dutler N, Nejati M, Valley B et al (2018) On the link between fracture toughness, tensile strength, and fracture process zone in anisotropic rocks. Eng Fract Mech 201:56–79. https://doi.org/10.1016/j.engfracmech.2018.08.01710.1016/j.engfracmech.2018.08.017 ↗
15. Exadaktylos GE, Vardoulakis I, Kourkoulis SK (2001) Influence of nonlinearity and double elasticity on flexure of rock beams – I. Technical theory. Int J Solids Struct 38(22–23):4091–4117. https://doi.org/10.1016/S0020-7683(00)00251-110.1016/S0020-7683(00)00251-1 ↗
16. Exadaktylos GE, Vardoulakis I, Kourkoulis SK (2001) Influence of nonlinearity and double elasticity on flexure of rock beams – II. Characterization of Dionysos marble. Int J Solids Struct 38(22–23):4119–4145. https://doi.org/10.1016/S0020-7683(00)00252-310.1016/S0020-7683(00)00252-3 ↗
17. Farnam Y, Geiker MR, Bentz D et al (2015) Acoustic emission waveform characterization of crack origin and mode in fractured and ASR damaged concrete. Cement Concr Compos 60:135–145. https://doi.org/10.1016/j.cemconcomp.2015.04.00810.1016/j.cemconcomp.2015.04.008 ↗
18. Fourney WL (1983) Fracture control blasting. In: Rossmanith HP (ed) Rock Fracture Mechanics. CISM International Centre for Mechanical Sciences, Number 275, Springer Vienna, Vienna, p 301–319, https://doi.org/10.1007/978-3-7091-2750-6_910.1007/978-3-7091-2750-6_9 ↗
19. Fowell R (1995) Suggested method for determining mode I fracture toughness using cracked Chevron notched Brazilian disc (CCNBD) specimens. Int J Rocks Mech Min Sci Geomech Abstr 32(1):57–64. https://doi.org/10.1016/0148-9062(94)00015-U10.1016/0148-9062(94)00015-U ↗
20. Gorski B, Conlon B, Ljunggren B (2007) Determination of the direct and indirect tensile strength on cores from borehole KFM01D. Forsmark site investigation, Report SKB P-07-76, Swedish Nuclear Fuel and Waste Management Co, Stockholm, Sweden
21. Griffith AA (1921) The phenomena of rupture and flow in solids. Philosophical Transactions of the Royal Society of London A: Proc Math Phys Eng Sci 221(582–593):163–198. https://doi.org/10.1098/rsta.1921.000610.1098/rsta.1921.0006 ↗
22. Guinea GV, Elices M, Planas J (1996) Stress intensity factors for wedge-splitting geometry. Int J Fract 81(2):113–124. https://doi.org/10.1007/BF0003317710.1007/BF00033177 ↗
23. Hashida T, Takahashi H (1985) Simple Determination of the Effective Young’s Modulus of Rock by the Compliance Method. J Test Eval 13(1):77–84. https://doi.org/10.1520/JTE10764J10.1520/JTE10764J ↗
24. Hoagland RG, Hahn GT, Rosenfield AR (1973) Influence of microstructure on fracture propagation in rock. Rock Mech 5(2):77–106. https://doi.org/10.1007/BF0124016010.1007/BF01240160 ↗
25. Hoffmann K (1996) Practical hints for the installation of strain gauges, 4th edn. Hottinger Baldwin Messtechnik GmbH, Germany, p 54
26. Hutchinson JW (1987) Crack tip shielding by micro-cracking in brittle solids. Acta Metall 35(7):1605–1619. https://doi.org/10.1016/0001-6160(87)90108-810.1016/0001-6160(87)90108-8 ↗
27. Irwin GR (1957) Analysis of stresses and strains near the end of a crack traversing a plate. J Appl Mech 24:361–36410.1115/1.4011547 ↗
28. ISRM (1979) Suggested methods for determining the uniaxial compressive strength and deformability of rock materials. Int J Rocks Mech Min Sci Geomech Abstr 16:137–14010.1016/0148-9062(79)91450-5 ↗
29. Jacobsson L, Brander L (2025) Tensile fracture initiation and propagation of granite and gneiss at wedge splitting tests: Part 2–Fracturing studies based on digital image correlation and thin section analysis. Rock Mech Rock Eng 58:2031–2054. https://doi.org/10.1007/s00603-024-04257-y10.1007/s00603-024-04257-y ↗
30. Jacobsson L, Appelquist K, Lindkvist JE (2015) Spalling experiments on large hard rock specimens. Rock Mech Rock Eng 48(4):1485–1503. https://doi.org/10.1007/s00603-014-0655-010.1007/s00603-014-0655-0 ↗
31. Jacobsson L, Sandström J, Brander L (2018) Wedge splitting tests on granite and gneiss specimens. In: ARMS10, 10th Asian Rock Mechanics Symposium, 20 October–3 November, 2018, Singapore, 11 pp
32. Jacobsson L, Sandström J, Flansbjer M, et al (2016) ONKALO POSE Experiment — Laboratory determination of density, porosity and mechanical anisotropy of gneiss and granite. Working report 2016-31, Posiva OY, Finland
33. Jamaaoui A, Pop O, Dubois F et al (2017) Wedge splitting test on douglas genotypes using an integrated mixed-mode approach. Theoret Appl Fract Mech 91:44–51. https://doi.org/10.1016/j.tafmec.2017.03.01210.1016/j.tafmec.2017.03.012 ↗
34. Jenq Y, Shah SP (1985) Two parameter fracture model for concrete. J Eng Mech 111(10):1227–1241. https://doi.org/10.1061/(ASCE)0733-9399(1985)111:10(1227)10.1061/(ASCE)0733-9399(1985)111:10(1227) ↗
35. Jianhong Y, Wu FQ, Sun JZ (2009) Estimation of the tensile elastic modulus using Brazilian disc by applying diametrically opposed concentrated loads. Int J Rock Mech Min Sci 46(3):568–576. https://doi.org/10.1016/j.ijrmms.2008.08.00410.1016/j.ijrmms.2008.08.004 ↗
36. Justo J, Castro J, Cicero S et al (2017) Notch effect on the fracture of several rocks: Application of the theory of critical distances. Theoret Appl Fract Mech 90:251–258. https://doi.org/10.1016/j.tafmec.2017.05.02510.1016/j.tafmec.2017.05.025 ↗
37. Kanninen MF (1973) An augmented double cantilever beam model for studying crack propagation and arrest. Int J Fract 9(1):83–92. https://doi.org/10.1007/BF0003595810.1007/BF00035958 ↗
38. Kranz RL (1983) Microcracks in rocks: A review. Tectonophysics 100:449–480. https://doi.org/10.1016/0040-1951(83)90198-110.1016/0040-1951(83)90198-1 ↗
39. Kuruppu MD, Obara Y, Ayatollahi MR et al (2014) ISRM-suggested method for determining the mode I static fracture toughness using semi-circular bend specimen. Rock Mech Rock Eng 47(1):267–274. https://doi.org/10.1007/s00603-013-0422-710.1007/s00603-013-0422-7 ↗
40. Labuz JF, Shah SP, Dowding CH (1985) Experimental analysis of crack propagation in granite. Int J Rock Mech Min Sci & Geomech Abstr 22(2):85–98. https://doi.org/10.1016/0148-9062(85)92330-710.1016/0148-9062(85)92330-7 ↗
41. Labuz JF, Shah SP, Dowding CH (1987) The fracture process zone in granite: evidence and effect. Int J Rocks Mech Min Sci & Geomech Abstr 24(4):235–246. https://doi.org/10.1016/0148-9062(87)90178-110.1016/0148-9062(87)90178-1 ↗
42. Lajtai EZ (1972) Effect of tensile stress gradient on brittle fracture initiation. Int J Rocks Mech Min Sci & Geomech Abstr 9(5):569–578. https://doi.org/10.1016/0148-9062(72)90009-510.1016/0148-9062(72)90009-5 ↗
43. Liaudat J, Garolera D, Martínez A, et al (2015) Numerical modelling of the wedge splitting test in rock specimens, using fracture-based zero-thickness interface elements. In: Onate E, Owen DRJ, Peric D, et al (eds) Proceedings of the XIII International Conference on Computational Plasticity : fundamentals and applications COMPLAS XIII, CIMNE, pp 974–981
44. Lin Q, Labuz JF (2013) Fracture of sandstone characterized by digital image correlation. Int J Rock Mech Min Sci 60:235–245. https://doi.org/10.1016/j.ijrmms.2012.12.04310.1016/j.ijrmms.2012.12.043 ↗
45. Lin Q, Wan B, Wang S et al (2019) Visual detection of a cohesionless crack in rock under three-point bending. Eng Fract Mech 211:17–31. https://doi.org/10.1016/j.engfracmech.2019.02.00910.1016/j.engfracmech.2019.02.009 ↗
46. Löfgren I, Olesen JF, Flansbjer M (2005) Application of wst-method for fracture testing of fibre-reinforced concrete. Tech. Rep. NT Technical Report 575, Nordic Innovation Centre, Oslo
47. Nadan BJ, Engelder T (2009) Microcracks in New England granitoids: A record of thermoelastic relaxation during exhumation of intracontinental crust. Geol Soc Am Bull 121(1–2):80–99. https://doi.org/10.1130/B26202.110.1130/B26202.1 ↗
48. Nasseri MHB, Mohanty B, Young RP (2006) Fracture toughness measurements and acoustic emission activity in brittle rocks. Pure Appl Geophys 163(5):917–945. https://doi.org/10.1007/s00024-006-0064-810.1007/s00024-006-0064-8 ↗
49. Nejati M, Aminzadeh A, Saar MO et al (2019) Modified semi-circular bend test to determine the fracture toughness of anisotropic rocks. Eng Fract Mech 213:153–171. https://doi.org/10.1016/j.engfracmech.2019.03.00810.1016/j.engfracmech.2019.03.008 ↗
50. Ostapska K, Malo KA (2020) Wedge splitting test of wood for fracture parameters estimation of norway spruce. Eng Fract Mech 232:107024. https://doi.org/10.1016/j.engfracmech.2020.10702410.1016/j.engfracmech.2020.107024 ↗
51. Ouchterlony F (1982) Review of fracture toughness testing of rock. SM Achives 7:131–211
52. Ouchterlony F (1988) Suggested methods for determining the fracture toughness of rock. Int J Rocks Mech Min Sci & Geomech Abstr 25(2):71–96. https://doi.org/10.1016/0148-9062(88)91871-210.1016/0148-9062(88)91871-2 ↗
53. Paterson MS, Wong Tf (2005) Experimental Rock Deformation – The Brittle Field, 2nd edn. Springer Berlin Heidelberg, https://doi.org/10.1007/b137431, 348 p10.1007/b137431 ↗
54. Peck L, Barton CC, Gordon RB (1985) Microstructure and the resistance of rock to tensile fracture. J Geophys Res Solid Earth 90(B13):11533–11546. https://doi.org/10.1029/JB090iB13p1153310.1029/JB090iB13p11533 ↗
55. Peck L, Nolen-Hoeksema RC, Barton CC et al (1985) Measurement of the resistance of imperfectly elastic rock to the propagation of tensile cracks. J Geophys Res Solid Earth 90(B9):7827–7836. https://doi.org/10.1029/JB090iB09p0782710.1029/JB090iB09p07827 ↗
56. Peng S, Johnson AM (1972) Crack growth and faulting in cylindrical specimens of chelmsford granite. Int J Rocks Mech Min Sci & Geomech Abstr 9(1):37–86. https://doi.org/10.1016/0148-9062(72)90050-210.1016/0148-9062(72)90050-2 ↗
57. Rice JR (1968) A path independent integral and the approximate analysis of strain concentration by notches and cracks. J Appl Mech 35(2):379–386. https://doi.org/10.1115/1.360120610.1115/1.3601206 ↗
58. Rossi P, Brühwiler E, Chhuy S, et al (1991) Fracture properties of concrete as determined by means of wedge splitting tests and tapered double cantilever beam tests. In: Shah SP, Carpinteri A (eds) Fracture Mechanics Test Methods for Concrete. RILEM Report 5, Chapman and Hall, p 87–128
59. Sanchidrián JA, García-Bermudez P, Jimeno CL (2000) Optimization of granite splitting by blasting using notched holes. Fragblast 4(1):1–11. https://doi.org/10.1080/1385514000940805910.1080/13855140009408059 ↗
60. Schmidt RA, Lutz TJ (1979) $${K}_{\rm {i}c\it }$$ and $${J}_{\rm {ic}}$$ of Westerly granite—effects of thickness and in-plane dimensions. In: Freiman SW (ed) ASTM STP678. ASTM International, West Conshohocken, USA, p 166–182, https://doi.org/10.1520/STP36635S10.1520/STP36635S ↗
61. Schock RN, Louis H (1982) Strain behavior of a granite and a graywacke sandstone in tension. J Geophys Res Solid Earth 87(B9):7817–7823. https://doi.org/10.1029/JB087iB09p0781710.1029/JB087iB09p07817 ↗
62. Simmons G, Richter G (1976) Microcracks in rocks. In: Strens RGJ (ed) Phys Chem Miner. NATO Advanced Study Institutes, John Wiley-Interscience, London and New York, pp 105–136
63. Siren T (2012) Fracture toughness properties of rocks in Olkiluoto: Laboratory measurements 2008–2009. Working report 2012-25, Posiva OY, Finland, Posiva OY, Finland
64. Sitek M, Adamczewski G, Szyszko M et al (2014) Numerical simulations of a wedge splitting test for high-strength concrete. Procedia Engineering 91:99–104. https://doi.org/10.1016/j.proeng.2014.12.02110.1016/j.proeng.2014.12.021 ↗
65. Spagnoli A, Carpinteri A, Ferretti D et al (2016) An experimental investigation on the quasi-brittle fracture of marble rocks. Fract Eng Mater Struct 39(8):956–968. https://doi.org/10.1111/ffe.1242910.1111/ffe.12429 ↗
66. Sun Z, Ouchterlony F (1986) Fracture toughness of stripa granite cores. Int J Rocks Mech Min Sci & Geomech Abstr 23(6):399–409. https://doi.org/10.1016/0148-9062(86)92305-310.1016/0148-9062(86)92305-3 ↗
67. Swanson PL (1986) A fracture mechanics and non-destructive evaluation investigation of the subcritical-fracture process in rock. In: Bradt RC, Evans AG, Hasselman DPH, et al (eds) Fracture Mechanics of Ceramics: Volume 8: Microstructure, Methods, Design, and Fatigue. Springer US, Boston, MA, p 299–317, https://doi.org/10.1007/978-1-4615-7026-4_2310.1007/978-1-4615-7026-4_23 ↗
68. Swanson PL (1987) Tensile fracture resistance mechanisms in brittle polycrystals: An ultrasonics and in situ microscopy investigation. J Geophys Res Solid Earth 92(B8):8015–8036. https://doi.org/10.1029/JB092iB08p0801510.1029/JB092iB08p08015 ↗
69. Taylor D (2007) The Theory of Critical Distances –A New Perspective in Fracture Mechanics. Elsevier Science Ltd, Oxford,. https://doi.org/10.1016/B978-008044478-9/50002-810.1016/B978-008044478-9/50002-8 ↗
70. Tsoutrelis CE, Gikas N, Nomikos P et al (1997) Use of notched boreholes for fracture controlled blasting in the ornamental stone quarries. Fragblast 1(4):445–463. https://doi.org/10.1080/1385514970940840810.1080/13855149709408408 ↗
71. Tuğrul A, Zarif IH (1999) Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey. Eng Geol 51(4):303–317. https://doi.org/10.1016/S0013-7952(98)00071-410.1016/S0013-7952(98)00071-4 ↗
72. Vargas R, Neggers J, Canto R et al (2016) Analysis of wedge splitting test on refractory castable via integrated DIC. J Eur Ceram Soc 36(16):4309–4317. https://doi.org/10.1016/j.jeurceramsoc.2016.07.00710.1016/j.jeurceramsoc.2016.07.007 ↗
73. Vargas R, Canto R, Hild F (2021) Fracture energy evaluation of refractories in wedge splitting tests from notch opening displacements. J Eur Ceram Soc 41(10):5367–5379. https://doi.org/10.1016/j.jeurceramsoc.2021.02.05510.1016/j.jeurceramsoc.2021.02.055 ↗
74. Walsh JB (1965) The effect of cracks on the uniaxial elastic compression of rocks. J Geophys Res 70(2):399–411. https://doi.org/10.1029/JZ070i002p0039910.1029/JZ070i002p00399 ↗
75. Wang Y, Hu X (2017) Determination of tensile strength and fracture toughness of granite using notched three-point-bend samples. Rock Mech Rock Eng 50(1):17–28. https://doi.org/10.1007/s00603-016-1098-610.1007/s00603-016-1098-6 ↗
76. Weisinger R, Costin LS, Lutz TJ (1980) $$KIc$$ and J-resistance-curve measurements on nevada tuff. Exp Mech 20(2):68–72. https://doi.org/10.1007/BF0232103710.1007/BF02321037 ↗
77. Yarema S, Krestin G (1966) Determination of the modulus of cohesion of brittle materials by compressive tests on disc specimens containing cracks. Sov Mater Sci 2(1):7–10. https://doi.org/10.1007/bf0071515710.1007/bf00715157 ↗
78. Yu X, da Gama CD, Na Y et al (2005) Deformation behaviour of rocks under compression and direct tension. J S Afr Inst Min Metall 105(1):55–62
79. Zhang H, Fu D, Song H et al (2015) Damage and fracture investigation of three-point bending notched sandstone beams by dic and ae techniques. Rock Mech Rock Eng 48(3):1297–1303. https://doi.org/10.1007/s00603-014-0635-410.1007/s00603-014-0635-4 ↗
80. Zhu XK, Joyce JA (2012) Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization. Eng Fract Mech 85:1–46. https://doi.org/10.1016/j.engfracmech.2012.02.00110.1016/j.engfracmech.2012.02.001 ↗