Numerical analysis of glass edge chipping by impact loading
Source abstract
Abstract
Abstract This study presents numerical analyses for edge chipping by impact loading. As a numerical analysis method, we extend Particle Discretization Scheme Finite Element Method (PDS-FEM) developed by the authors to be able to simulate fracture due to impact loading. We performed simulations targeting edge chipping of soda-lime glass by impact of rigid steel sphere and examined the crack morphology while varying the diameter of the impactor, the impact velocity, and the impact distance. The proposed method successfully simulates the 3D complex crack pattern on edge chipping such as Hertzian cone crack and conchoidal chip scar. The method also reproduces the change of crack morphologies depending on the impact force and the impact distance. Also, a series of numerical analyses is presented to reveal the effect of the impactor geometry on the chip dimensions. The height of chip is independent of the impactor geometry while the width of chip depends on it. According to the agreement with experimental results, it is confirmed that the proposed method is capable of realizing edge chipping due to impact loading.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · High-Velocity Impact and Material Behavior · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Almond EA, McCormick NJ (1986) Constant-geometry edge-flaking of brittle materials. Nature 321:53–55. https://doi.org/10.1038/321053a010.1038/321053a0 ↗
2. Belytschko T, Black T (1999) Elastic crack growth in finite elements with minimal remeshing. Int J Numer Meth Eng 45(5):601–620. https://doi.org/10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S ↗
3. Belytschko T, Moës N, Usui S et al (2001) Arbitrary discontinuities in finite elements. Int J Numer Meth Eng 50(4):993–1013. https://doi.org/10.1002/1097-0207(20010210)50:4<993::AID-NME164>3.0.CO;2-M10.1002/1097-0207(20010210)50:4<993::AID-NME164>3.0.CO;2-M ↗
4. Braun M, Fernández-Sáez J (2014) A new 2d discrete model applied to dynamic crack propagation in brittle materials. Int J Solids Struct 51(21):3787–3797. https://doi.org/10.1016/j.ijsolstr.2014.07.01410.1016/j.ijsolstr.2014.07.014 ↗
5. Braun M, Fernández-Sáez J (2016) A 2d discrete model with a bilinear softening constitutive law applied to dynamic crack propagation problems. Int J Fract 197(1):81–97. https://doi.org/10.1007/s10704-015-0067-510.1007/s10704-015-0067-5 ↗
6. Braun M, González-Albuixech V (2019) Analysis of the stress intensity factor dependence with the crack velocity using a lattice model. Fatigue Fract Eng Mater Struct 42:1075–1084. https://doi.org/10.1111/ffe.1297110.1111/ffe.12971 ↗
7. Braun M, Aranda-Ruiz J, Fernández-Sáez J (2021) Mixed mode crack propagation in polymers using a discrete lattice method. Polymers. https://doi.org/10.3390/polym1308129010.3390/polym13081290 ↗
8. Cao Y (2001) Failure analysis of exit edges in ceramic machining using finite element analysis. Eng Fail Anal 8(4):325–338. https://doi.org/10.1016/S1350-6307(00)00024-810.1016/S1350-6307(00)00024-8 ↗
9. Casetti L (1995) Efficient symplectic algorithms for numerical simulations of hamiltonian flows. Phys Scr 51:29–34. https://doi.org/10.1088/0031-8949/51/1/00510.1088/0031-8949/51/1/005 ↗
10. Chai H (2006) Crack propagation in glass coatings under expanding spherical contact. J Mech Phys Solids 54(3):447–466. https://doi.org/10.1016/j.jmps.2005.10.00410.1016/j.jmps.2005.10.004 ↗
11. Chai H (2011) On the mechanics of edge chipping from spherical indentation. Int J Frac 169(1):85–95. https://doi.org/10.1007/s10704-011-9589-710.1007/s10704-011-9589-7 ↗
12. Chai H, Lawn BR (2007) Edge chipping of brittle materials: effect of side-wall inclination and loading angle. Int J Frac 145(2):159–165. https://doi.org/10.1007/s10704-007-9113-210.1007/s10704-007-9113-2 ↗
13. Chai H, Lawn BR (2007) A universal relation for edge chipping from sharp contacts in brittle materials: a simple means of toughness evaluation. Acta Mater 55(7):2555–2561. https://doi.org/10.1016/j.actamat.2006.10.06110.1016/j.actamat.2006.10.061 ↗
14. Chai H, Ravichandran G (2007) On the mechanics of surface and side-wall chipping from line-wedge indentation. Int J Frac 148(3):221–231. https://doi.org/10.1007/s10704-008-9196-410.1007/s10704-008-9196-4 ↗
15. Chai H, Ravichandran G (2009) On the mechanics of fracture in monoliths and multilayers from low-velocity impact by sharp or blunt-tip projectiles. Int J Impact Eng 36(3):375–385. https://doi.org/10.1016/j.ijimpeng.2008.07.06510.1016/j.ijimpeng.2008.07.065 ↗
16. Danzer R, Hangl M (2001) Fractography of Glasses and Ceramics IV, Ceramic Transactions, vol 122, American Ceramic Society, chap Edge Chipping of Brittle Materials, pp 43–55
17. Gogotsi GA (2013) Edge chipping resistance of ceramics: problems of test method. J Adv Ceram 2(4):370–377. https://doi.org/10.1007/s40145-013-0085-610.1007/s40145-013-0085-6 ↗
18. Gogotsi GA, Mudrik SP (2009) Fracture barrier estimation by the edge fracture test method. Ceram Int 35:1871–1875. https://doi.org/10.1016/J.CERAMINT.2008.10.02610.1016/J.CERAMINT.2008.10.026 ↗
19. Gogotsi GA, Mudrik SP (2010) Glasses: new approach to fracture behavior analysis. J Non-Cryst Solids 356(20):1021–1026. https://doi.org/10.1016/j.jnoncrysol.2010.01.02110.1016/j.jnoncrysol.2010.01.021 ↗
20. Gogotsi GA, Galenko VI, Mudrik SP et al (2007) Glass fracture in edge flaking. Strength Mater 39(6):639–645. https://doi.org/10.1007/s11223-007-0072-710.1007/s11223-007-0072-7 ↗
21. Griffith AA (1921) The phenomena of rupture and flow in solids. Philos Trans R Soc Lond 221:163–19810.1098/rsta.1921.0006 ↗
22. Hirobe S, Imakita K, Aizawa H et al (2021) Mathematical model and numerical analysis method for dynamic fracture in a residual stress field. Phys Rev E 104(2):025001. https://doi.org/10.1103/PhysRevE.104.02500110.1103/PhysRevE.104.025001 ↗
23. Hirobe S, Imakita K, Aizawa H et al (2021) Simulation of catastrophic failure in a residual stress field. Phys Rev Lett 127(6):064301. https://doi.org/10.1103/PhysRevLett.127.06430110.1103/PhysRevLett.127.064301 ↗
24. Hori M, Oguni K, Sakaguchi H (2005) Proposal of FEM implemented with particle discretization for analysis of failure phenomenon. J Mech Phys Solids 53:681–703. https://doi.org/10.1016/j.jmps.2004.08.00510.1016/j.jmps.2004.08.005 ↗
25. Love AEA (1934) A treatise on mathematical theory of elasticity, 4th edn. Cambridge University Press, Cambridge
26. Martín T, Español P, Rubio M et al (2000) Dynamic fracture in a discrete model of a brittle elastic solid. Physical review E 61:6120–31. https://doi.org/10.1103/PhysRevE.61.612010.1103/PhysRevE.61.6120 ↗
27. Moës N, Dolbow JOHN, Belytschko T (1999) A finite element method for crack growth without remeshing. Int J Numer Meth Eng 46(1):131–150. https://doi.org/10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J ↗
28. Mohajerani A, Spelt JK (2009) Edge rounding of brittle materials by low velocity erosive wear. Wear 267(9):1625–1633. https://doi.org/10.1016/j.wear.2009.06.00410.1016/j.wear.2009.06.004 ↗
29. Mohajerani A, Spelt JK (2010) Edge chipping of borosilicate glass by blunt indentation. Mech Mater 42(12):1064–1080. https://doi.org/10.1016/j.mechmat.2010.10.00210.1016/j.mechmat.2010.10.002 ↗
30. Mohajerani A, Spelt JK (2011) Edge chipping of borosilicate glass by low velocity impact of spherical indenters. Mech Mater 43(11):671–683. https://doi.org/10.1016/j.mechmat.2011.06.01610.1016/j.mechmat.2011.06.016 ↗
31. Morrell R (2005) Edge flaking - similarity between quasistatic indentation and impact mechanisms for brittle materials. Key Eng Mat 290:14–22. https://doi.org/10.4028/www.scientific.net/KEM.290.1410.4028/www.scientific.net/KEM.290.14 ↗
32. Morrell R, Gant AJ (2001) Edge chipping of hard materials. Int J Refract Met Hard Mater 19(4):293–301. https://doi.org/10.1016/S0263-4368(01)00030-010.1016/S0263-4368(01)00030-0 ↗
33. Oguni K, Wijerathne MLL, Okinaka T et al (2009) Crack propagation analysis using PDS-FEM and comparison with fracture experiment. Mech Mater 41(11):1242–1252. https://doi.org/10.1016/j.mechmat.2009.07.00310.1016/j.mechmat.2009.07.003 ↗
34. Shet C, Chandra N (2002) Analysis of energy balance when using cohesive zone models to simulate fracture processes. J Eng Mater-T ASME 124(4):440–450. https://doi.org/10.1115/1.149409310.1115/1.1494093 ↗
35. Silling SA (2000) Reformulation of elasticity theory for discontinuities and long-range forces. J Mech Phys Solids 48(1):175–209. https://doi.org/10.1016/S0022-5096(99)00029-010.1016/S0022-5096(99)00029-0 ↗
36. Silling SA, Epton M, Weckner O et al (2007) Peridynamic states and constitutive modeling. J Elasticity 88(2):151–184. https://doi.org/10.1007/s10659-007-9125-110.1007/s10659-007-9125-1 ↗
37. Timoshenko S, Goodier N (1970) Theory of Elasticity,, 3rd edn. McGRAW-HILL10.1115/1.3408648 ↗
38. Volokh KY (2004) Comparison between cohesive zone models. Int J Numer Meth Bio 20(11):845–856. https://doi.org/10.1002/cnm.71710.1002/cnm.717 ↗
39. Wiederhorn S (1969) Fracture surface energy of glass. J Am Ceram Soc 52:99–105. https://doi.org/10.1111/j.1151-2916.1969.tb13350.x10.1111/j.1151-2916.1969.tb13350.x ↗
40. Wijerathne MLL, Oguni K, Hori M (2009) Numerical analysis of growing crack problems using particle discretization scheme. Int J Numer Meth Eng 80(1):46–73. https://doi.org/10.1002/nme.262010.1002/nme.2620 ↗