Fatigue crack growth behavior of a nickel-based superalloy under turbine standard spectrum loads
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Probabilistic and Robust Engineering Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. ASTM, E647-15e1 (2015) Standard test method for measurement of fatigue crack growth rates. Am Soc Test Mater PA. https://doi.org/10.1520/E0647-15E0110.1520/E0647-15E01 ↗
2. ASTM E1049–85 (2023) Standard practice for cycle counting in fatigue analysis. In: American Society for Testing and Materials PA. https://doi.org/10.1520/E1049-85R2310.1520/E1049-85R23 ↗
3. ASTM E08/E08M-22 (2024) Standard test methods for tension testing of metallic materials. Am Soc Test Mater PA. https://doi.org/10.1520/E0008_E0008M-2210.1520/E0008_E0008M-22 ↗
4. ASTM E399-23 (2024) Standard test method for linear-elastic plane-strain fracture toughness of metallic materials. Am Soc Test Mater PA. https://doi.org/10.1520/E0399-2310.1520/E0399-23 ↗
5. Bhachu KS, Narasimhachary SB, Shinde S.R, Gravett PW (2017) Application of 3D fracture mechanics for improved crack growth predictions of gas turbine components. In: Turbo Expo: Power for Land, Sea, and Air (Vol. 50923, p. V07AT31A016). American Society of Mechanical Engineers10.1115/GT2017-64890 ↗
6. Caton MJ, John R, Porter WJ, Burba ME (2011) Stress ratio effects on small fatigue crack growth in Ti–6Al–4V. Int J Fatigue 38:36–4510.1016/j.ijfatigue.2011.11.004 ↗
7. Dahal J, Maciejewsk K, Ghonem H (2013) Loading frequency and microstructure interactions in intergranular fatigue crack growth in a disk Ni-based superalloy. Int J Fatigue 57:93–10210.1016/j.ijfatigue.2012.12.009 ↗
8. FRANC3D Version 7.5.1 (2024) Fracture Analysis Consultants, Inc (FAC), Cornell Fracture Group.
9. Jiang R, Bull DJ, Proprentner D, Shollock B, Reed PAS (2017) Effects of oxygen-related damage on dwell-fatigue crack propagation in a P/M Ni-based superalloy: From 2D to 3D assessment. Int J Fatigue 99:175–18610.1016/j.ijfatigue.2017.03.003 ↗
10. Li HY, Sun JF, Hardy MC, Evans HE, Williams SJ, Doel TJA, Bowen P (2015) Effects of microstructure on high temperature dwell fatigue crack growth in a coarse grain PM nickel based superalloy. Acta Mater 90:355–36910.1016/j.actamat.2015.02.023 ↗
11. Malipatil SG, Majila AN, Chandru Fernando D, Manjunatha CM (2020) Influence of crack driving force on correlating stress ratio effects in fatigue crack growth rate of a nickel base superalloy IN720. Int J Adv Eng Sci Appl Math 12(1):19–2610.1007/s12572-020-00268-4 ↗
12. Malipatil SG, Majila AN, Fernando DC, Manjuprasad M, Manjunatha CM (2021a) Fatigue crack growth behaviour of a nickel base super alloy GTM720 under cold-TURBISTAN spectrum load sequence. Theor Appl Fract Mech 112:10291310.1016/j.tafmec.2021.102913 ↗
13. Malipatil SG, Majila AN, Fernando DC, Manjuprasad M, Manjunatha CM (2021b) Damage tolerance behaviour of a nickel-based super-alloy GTM718 under Cold-TURBISTAN variable amplitude loads. Trans Indian Inst Metals 74:901–90710.1007/s12666-021-02212-x ↗
14. SG Malipatil, N Majila, DC Fernando, M Manjuprasad, CM Manjunatha (2021c) A comparison of damage tolerance behaviour of two different nickel base superalloys under a turbine standard spectrum loads. Mater Today Proc 47(Part-14): 4897–4900.10.1016/j.matpr.2021.06.265 ↗
15. Malipatil SG, Nagarajappa N, Majila AN, Fernando DC, Bojja R, Jagannathan N, Manjuprasad M, Manjunatha CM (2022) A study on the fatigue crack growth behaviour of GTM718 nickel based super alloy under cold-TURBISTAN spectrum loads. Theor Appl Fract Mech 120:10338610.1016/j.tafmec.2022.103386 ↗
16. Mangardich D, Abrari F, Fawaz Z (2019) Modeling crack growth of an aircraft engine high pressure compressor blade under combined HCF and LCF loading. Eng Fract Mech 214:474–48610.1016/j.engfracmech.2019.04.028 ↗
17. Manjunatha CM (2008) Fatigue crack growth prediction under spectrum load sequence in an aluminum alloy by K*-RMS approach. Int J Damage Mech 17(6):477–49210.1177/1056789506069473 ↗
18. Manjunatha CM, Parida BK (2004) Prediction of fatigue crack growth after single overload in an aluminum alloy. AIAA J 42(8):1536–154210.2514/1.880 ↗
19. Nagarajappa N, Malipatil SG, Majila AN, Fernando DC, Manjuprasad M, Manjunatha CM (2022) Fatigue crack growth prediction in nickel base superalloys under cold-TURBISTAN spectrum loads using FRANC3D. Trans Indian Natl Acad Eng 7(2):533–54010.1007/s41403-021-00277-0 ↗
20. Newman Jr JC (1981) A crack-closure model for predicting fatigue crack growth under aircraft. In: Methods and models for predicting fatigue crack growth under random loading, 53–8410.1520/STP28334S ↗
21. Newman JC (1996) Application of a closure model to predict crack growth in three engine disc materials. Int J Fract 80(2):193–21810.1007/BF00012669 ↗
22. Newman JC Jr, Kota K, Lacy TE (2018) Fatigue and crack-growth behavior in a titanium alloy under constant amplitude and spectrum loading. Eng Fract Mech 187:207–22410.1016/j.engfracmech.2017.10.036 ↗
23. Onofrio G, Osinkolu GA, Marchionni M (2004) Effects of loading waveform on fatigue crack growth of Udimet 720 Li superalloy. Int J Fatigue 26(3):203–20910.1016/S0142-1123(03)00170-1 ↗
24. Padula Ii SA, Shyam A, Ritchi RO, Milligan WW (1999) High frequency fatigue crack propagation behavior of a nickel-base turbine disk alloy. Int J Fatigue 21(7):726–73110.1016/S0142-1123(99)00036-5 ↗
25. Ray A, Patankar R (2001) Fatigue crack growth under variable-amplitude loading: part II–Code development and model validation. Appl Math Model 25(11):995–101310.1016/S0307-904X(01)00027-0 ↗
26. Remadi A, Bahloul C, Bouraoui A (2019) Prediction of fatigue crack growth life under variable-amplitude loading using finite element analysis. Comptes Rendus Mécanique 347(8):576–58710.1016/j.crme.2019.06.008 ↗
27. Stephens RR, Stephens RI, Veit AL, Albertson TP (1997) Fatigue crack growth of Ti-62222 titanium alloy under constant amplitude and miniTWIST flight spectra at 25° C and 175° C. Int J Fatigue 19(4):301–30810.1016/S0142-1123(97)00009-1 ↗
28. Storgärds E, Simonsson K, Sjöström S (2016) Three-dimensional crack growth modelling of a Ni-based superalloy at elevated temperature and sustained loading. Theoret Appl Fract Mech 81:2–1010.1016/j.tafmec.2015.11.008 ↗
29. Ten Have AA (1987) Cold Turbistan; final definition of a standarized fatigue test loading sequence for tactical aircraft cold section engine discs. NLR-TR 87054 L
30. Tvergaard V (2006) Effect of underloads or overloads in fatigue crack growth by crack-tip blunting. Eng Fract Mech 73(7):869–87910.1016/j.engfracmech.2005.10.009 ↗
31. Wang Q, Wang X, Zhang N (2021) Investigation of the fatigue damage mechanism of Inconel 617 at elevated temperatures obtained by in situ SEM fatigue tests. Int J Fatigue 153:10651810.1016/j.ijfatigue.2021.106518 ↗