Influence of polishing technique on crack resistance of quartz plates
Source abstract
Abstract
The sensory properties of monocrystalline quartz are influenced by its surface, mechanical properties, and crack resistance. The surface quality of quartz is significantly influenced by its processing technology. The aim of this work is comparative studies of surface morphology, roughness, mechanical properties, and crack resistance of single-crystal quartz plates after chemical–mechanical and magnetorheological polishing. Surface morphology was assessed by atomic force microscopy (AFM). E and H were determined by nanoindentation (NI). The fracture toughness was assessed by the indentation method with visualization of the AFM imprint topography. The task was to determine the most reliable method for calculating the critical stress intensity factor КIC for quartz, adequate to the load range from 0.01 to 0.5 N. It was found that chemical–mechanical polishing creates an altered layer 70 nm thick on the quartz surface, which significantly changes its mechanical properties and КIC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Anishchik V, Uglov V, Kuleshov A, Filipp A, Rusalsky D, Astashynskaya M, Samtsov M, Kuznetsova T, Thiery F, Pauleau Y (2005) Electron field emission and surface morphology of a-C and a-C: H thin films. Thin Solid Films 482:248–252. https://doi.org/10.1016/j.tsf.2004.11.15310.1016/j.tsf.2004.11.153 ↗
2. Baek S, Kim W, Jeon S, Yong K (2018) Developing a non-optical platform for impact dynamics analysis on nanostructured superhydrophobic surfaces using a quartz crystal microbalance. Sens Actuators B Chem 262:595–602. https://doi.org/10.1016/j.snb.2018.02.03110.1016/j.snb.2018.02.031 ↗
3. Bai B, Li C, Zhao Y (2020) Development of v-shaped beam on the shock resistance and driving frequency of micro quartz tuning forks resonant gyroscope. Micromachines 11:1012. https://doi.org/10.3390/mi1111101210.3390/mi11111012 ↗
4. Bedi TS, Singh AK (2016) Magnetorheological methods for nanofinishing—a review. Part Sci Technol 34:412–422. https://doi.org/10.1080/02726351.2015.108165710.1080/02726351.2015.1081657 ↗
5. Beitia J, Clifford A, Fell C, Loisel P (2015) Quartz pendulous accelerometers for navigation and tactical grade systems. In: Proceedings of the 2015 DGON inertial sensors and systems, Institute of Electrical and Electronics Engineers Inc., 2015. Karlsruhe 2015, pp 1–20, https://doi.org/10.1109/InertialSensors.2015.731425610.1109/InertialSensors.2015.7314256 ↗
6. Bo D, Jianwei Z, Yuling L, Mingbin S, Yufeng Z (2014) Surface roughness of optical quartz substrate by chemical mechanical polishing. J Semicond 35:116001. https://doi.org/10.1088/1674-4926/35/11/11600110.1088/1674-4926/35/11/116001 ↗
7. Burlakova VE, Tyurin AI, Drogan EG, Sadyrin EV, Pirozhkova TS, Novikova AA, Belikova MA (2019) Mechanical properties and size effects of self-organized film. J Tribol 141:051601. https://doi.org/10.1115/1.404267810.1115/1.4042678 ↗
8. Cao J, Li J, Nie M, Zhu P, Zhao C, Zhang J, Xuan T, Xu J, Li B (2019) A novel surface polishing method and its fundamental performance in ultra-fine polishing of wafer. Int J Adv Manuf Technol 105:2919–2933. https://doi.org/10.1007/s00170-019-04473-910.1007/s00170-019-04473-9 ↗
9. Cho NJ, D’Amour JN, Stalgren J, Knoll W, Kanazawa K, Frank CW (2007) Quartz resonator signatures under Newtonian liquid loading for initial instrument check. J Colloid Interface Sci 315:248–254. https://doi.org/10.1016/j.jcis.2007.06.02010.1016/j.jcis.2007.06.020 ↗
10. Danel JS, Delapierre G (1991) Quartz: a material for microdevices. J Micromech Microeng 1:187–198. https://doi.org/10.1088/0960-1317/1/4/00110.1088/0960-1317/1/4/001 ↗
11. Dokou E, Zhang L, Barteau MA (2002) Comparison of atomic force microscopy imaging methods and roughness determinations for a highly polished quartz surface. J. Vac Sci Technol B Microelectron Nanom Struct 20:2183–2186. https://doi.org/10.1116/1.151363310.1116/1.1513633 ↗
12. Dong R, Jiang X, Hao C, Xu W, Li H, Chen Y, Xie T (2019) Wettability of quartz controlled by UV light irradiation using an azobenzene surfactant. Colloids Surfaces A Physicochem Eng Asp 578:123586. https://doi.org/10.1016/j.colsurfa.2019.12358610.1016/j.colsurfa.2019.123586 ↗
13. Ebrahimi F, Kalwani L (1999) Fracture anisotropy in silicon single crystal. Mater Sci Eng A 268:116–126. https://doi.org/10.1016/S0921-5093(99)00077-510.1016/S0921-5093(99)00077-5 ↗
14. Eidel B (2011) Crystal plasticity finite-element analysis versus experimental results of pyramidal indentation into (0 0 1) fcc single crystal. Acta Mater 59:1761–177110.1016/j.actamat.2010.11.042 ↗
15. Evans AG, Wilshaw TR (1976) Quasi-static solid particle damage in brittle solids-I. Observations analysis and implications. Acta Metall 24:939–956. https://doi.org/10.1016/0001-6160(76)90042-010.1016/0001-6160(76)90042-0 ↗
16. Ferguson CC, Lloyd GE, Knipe RJ (1987) Fracture mechanics and deformation processes in natural quartz: a combined Vickers identification, SEM, and TEM study. Can J Earth Sci 24:544–555. https://doi.org/10.1139/e87-05310.1139/e87-053 ↗
17. Gorodkin G, Novikova Z (2012) Influence of flowing parameter of magnetorheological polishing fluids (MRPFs) on the quality of processing polycrystalline glass ceramics. J Intell Mater Syst Struct 23:959–962. https://doi.org/10.1177/1045389X1142836510.1177/1045389X11428365 ↗
18. Gupta MK, Rasheed IA, Suresh MB (2020) Advances in nano-finishing of optical glasses and glass ceramics. In: Handbook of advanced ceramics and composites, Springer, pp 569–59910.1007/978-3-030-16347-1_17 ↗
19. Guzzo PL (2001) Evaluation of hardness and fracture toughness in natural quartz crystals by indentation experiments. In: 16th Brazilian congress of mechanical engineering 2:155–161
20. Guzzo PL, Raslan AA, De Mello JDB (2003) Ultrasonic abrasion of quartz crystals. Wear 255:67–77. https://doi.org/10.1016/S0043-1648(03)00094-210.1016/S0043-1648(03)00094-2 ↗
21. Hampitak P, Melendrez D, Iliut M, Fresquet M, Parsons N, Spencer B, Jowitt TA, Vijayaraghavan A (2020) Protein interactions and conformations on graphene-based materials mapped using quartz-crystal microbalance with dissipation monitoring (QCM-D). Carbon N Y 165:317–327. https://doi.org/10.1016/j.carbon.2020.04.09310.1016/j.carbon.2020.04.093 ↗
22. Hao D, Hu C, Grant J, Glidle A, Cumming DRS (2018) Hybrid localized surface plasmon resonance and quartz crystal microbalance sensor for label free biosensing. Biosens Bioelectron 100:23–27. https://doi.org/10.1016/j.bios.2017.08.03810.1016/j.bios.2017.08.038 ↗
23. Hildebrand J, Hecht K, Bliedtner J, Müller H (2011) Laser beam polishing of quartz glass surfaces. Phys Proc 12:452–461. https://doi.org/10.1016/j.phpro.2011.03.05610.1016/j.phpro.2011.03.056 ↗
24. Hocheng H, Kuo KL (2002) Fundamental study of ultrasonic polishing of mold steel. Int J Mach Tools Manuf 42:7–13. https://doi.org/10.1016/S0890-6955(01)00099-210.1016/S0890-6955(01)00099-2 ↗
25. ISO - ISO 19606:2017 Fine ceramics (advanced ceramics, advanced technical ceramics)—Test method for surface roughness of fine ceramic films by atomic force microscopy. https://www.iso.org/standard/65457.html. Accessed 4 Dec 2020
26. Januchta K, Smedskjaer MM (2019) Indentation deformation in oxide glasses: quantification, structural changes, and relation to cracking. J Non-Crystalline Solids X 1:100007. https://doi.org/10.1016/j.nocx.2018.10000710.1016/j.nocx.2018.100007 ↗
27. Jha KK, Suksawang N, Lahiri D, Agarwal A (2012) Energy-based analysis of nanoindentation curves for cementitious materials. ACI Mater J 109:81–90. https://doi.org/10.14359/5168357310.14359/51683573 ↗
28. Kanaev AA (2019) Effect of surface-active components of polishing compositions on the deformational-strength properties of ruby and quartz surfaces. Glas Ceram 75:435–437. https://doi.org/10.1007/s10717-019-00106-510.1007/s10717-019-00106-5 ↗
29. Khort A, Romanovski V, Lapitskaya V, Kuznetsova T, Yusupov K, Moskovskikh D, Haiduk Y, Podbolotov K (2020) Graphene@metal nanocomposites by solution combustion synthesis. Inorg Chem 59:6550–6565. https://doi.org/10.1021/acs.inorgchem.0c0067310.1021/acs.inorgchem.0c00673 ↗
30. Kim DW, Lee JW, Cho MW, Choi SB (2009) An experimental study on the ultra-precision polishing of quartz crystal using MR fluids and micro abrasives. J Phys Conf Ser 149:012061. https://doi.org/10.1088/1742-6596/149/1/01206110.1088/1742-6596/149/1/012061 ↗
31. Kuznetsova TA, Lapitskaya VA, Chizhik SA, Uglov VV, Shymanski VI, Kvasov NT (2018) Morphology of multilayer AlN/SiN coatings with layers of different thickness. IOP Conf Ser 443:012018. https://doi.org/10.1088/1757-899X/443/1/01201810.1088/1757-899X/443/1/012018 ↗
32. Kuznetsova T, Lapitskaya V, Khabarava A, Chizhik S, Warcholinski B, Gilewicz A (2020) The influence of nitrogen on the morphology of ZrN coatings deposited by magnetron sputtering. Appl Surf Sci. https://doi.org/10.1016/j.apsusc.2020.14650810.1016/j.apsusc.2020.146508 ↗
33. Lamberson L, Ramesh KT (2017) Dynamic electromechanical behavior of single-crystal α-quartz. Int J Impact Eng 110:338–345. https://doi.org/10.1016/j.ijimpeng.2017.01.02910.1016/j.ijimpeng.2017.01.029 ↗
34. Lapitskaya VA, Kuznetsova TA, Chizhik SA, Rogachev AA (2018) Morphology of multilayer metal-carbon coatings with different arrangements of functional layers. IOP Conf Series 443(1):012020. https://doi.org/10.1088/1757-899X/443/1/01202010.1088/1757-899X/443/1/012020 ↗
35. Lapitskaya VA, Kuznetsova TA, Chizhik SA, Komarov AI, Frolov YI, Romanyuk AS (2019) Study of the crack resistance of microarc oxidation coatings after laser doping with zirconium oxide. Tech Phys 64:1609–1614. https://doi.org/10.1134/S106378421911017310.1134/S1063784219110173 ↗
36. Lapitskaya VA, Kuznetsova TA, Chizhik SA, Solovei DV, Warcholinski B, Gilevicz A, Aizikovich SM, Mitrin BI, Krenev LI (2020) Wear of thin coatings with different hardness by probe methods. J Surf Invest 14:602–608. https://doi.org/10.1134/S102745102003032510.1134/S1027451020030325 ↗
37. Lawn BR, Fuller ER (1975) Equilibrium penny-like cracks in indentation fracture. J Mater Sci 10:2016–2024. https://doi.org/10.1007/BF0055747910.1007/BF00557479 ↗
38. Lawn BR, Evans AG, Marshall DB (1980) Elastic/plastic indentation damage in ceramics: the median/radial crack system. J Am Ceram Soc 63:574–581. https://doi.org/10.1111/j.1151-2916.1980.tb10768.x10.1111/j.1151-2916.1980.tb10768.x ↗
39. Lee BM, Nam HG, Choi HY, Hong SK, Jeong YG, Choi JH (2018) Transparent electric heaters based on photoresist-derived carbon micropatterns on quartz plates. Macromol Mater Eng 303:1–7. https://doi.org/10.1002/mame.20180029610.1002/mame.201800296 ↗
40. Leppin C, Hampel S, Meyer FS, Langhoff A, Fittschen UEA, Johannsmann D (2020) A quartz crystal microbalance, which tracks four overtones in parallel with a time resolution of 10 milliseconds: application to inkjet printing. Sensors 20:1–17. https://doi.org/10.3390/s2020591510.3390/s20205915 ↗
41. Liang J, Zhang L, Wang L, Dong Y, Ueda T (2015) Flip chip bonding of a quartz MEMS-based vibrating beam accelerometer. Sensors 15:22049–22059. https://doi.org/10.3390/s15092204910.3390/s150922049 ↗
42. Ma CP, Guan YC, Zhou W (2017) Laser polishing of additive manufactured Ti alloys. Opt Lasers Eng 93:171–177. https://doi.org/10.1016/j.optlaseng.2017.02.00510.1016/j.optlaseng.2017.02.005 ↗
43. Malshe AP, Park BS, Brown WD, Naseem HA (1999) A review of techniques for polishing and planarizing chemically vapor-deposited (CVD) diamond films and substrates. Diam Relat Mater 8:1198–1213. https://doi.org/10.1016/S0925-9635(99)00088-610.1016/S0925-9635(99)00088-6 ↗
44. Matko V, Milanovic M (2019) Highly enhanced inductance sensing performance of dual-quartz crystal converter. Sensors 19:2188. https://doi.org/10.3390/s1909218810.3390/s19092188 ↗
45. Misumi I, Sugawara K, Kizu R, Hirai A, Gonda S (2019) Extension of the range of profile surface roughness measurements using metrological atomic force microscope. Precis Eng 56:321–329. https://doi.org/10.1016/j.precisioneng.2019.01.00210.1016/j.precisioneng.2019.01.002 ↗
46. Molaei F, Siavoshi H (2020) Molecular dynamics studies of thermal conductivity and mechanical properties of single crystalline α-quartz. Solid State Commun 320:114020. https://doi.org/10.1016/j.ssc.2020.114020.510.1016/j.ssc.2020.114020.5 ↗
47. Niihara K (1983) A fracture mechanics analysis of indentation-induced Palmqvist crack in ceramics. J Mater Sci Lett 2:221–223. https://doi.org/10.1007/BF0072562510.1007/BF00725625 ↗
48. Niihara K, Morena R, Hasselman DPH (1982) Evaluation of KIc of brittle solids by the indentation method with low crack-to-indent ratios. J Mater Sci Lett 1:13–16. https://doi.org/10.1007/BF0072470610.1007/BF00724706 ↗
49. Nikolaev AL, Mitrin BI, Sadyrin EV, Zelentsov VB, Aguiar AR, Aizikovich SM (2020) Mechanical properties of microposit S1813 thin layers. In: Aizikovich SM, Altenbach H, Eremeyev V, Swain MV, Galybin A (eds) Modeling, synthesis and fracture of advanced materials for industrial and medical applications. Springer, Cham
50. Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564–1583. https://doi.org/10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
51. Pizzagalli L, Godet J, Guénolé J, Brochard S, Holmstrom E, Nordlund K, Albaret T (2013) A new parametrization of the Stillinger-Weber potential for an improved description of defects and plasticity of silicon. J Phys Condens Matter 25:055801. https://doi.org/10.1088/0953-8984/25/5/05580110.1088/0953-8984/25/5/055801 ↗
52. Rianjanu A, Nugroho DB, Kusumaatmaja A, Roto R, Triyana K (2019) A study of quartz crystal microbalance modified with polyvinyl acetate nanofiber to differentiate short-chain alcohol isomers. Sens Bio-Sensing Res 25:100294. https://doi.org/10.1016/j.sbsr.2019.10029410.1016/j.sbsr.2019.100294 ↗
53. Rudolph G, Hermansson A, Jönsson AS, Lipnizki F (2021) In situ real-time investigations on adsorptive membrane fouling by thermomechanical pulping process water with quartz crystal microbalance with dissipation monitoring (QCM-D). Sep Purif Technol 254:117578. https://doi.org/10.1016/j.seppur.2020.11757810.1016/j.seppur.2020.117578 ↗
54. Sadyrin E, Swain M, Mitrin B, Rzhepakovsky I, Nikolaev A, Irkha V, Yogina D, Lyanguzov N, Maksyukov S, Aizikovich S (2020a) Characterization of enamel and dentine about a white spot lesion: mechanical properties, mineral density. Microstruct Mol Compos Nanomater 10:1889. https://doi.org/10.3390/nano1009188910.3390/nano10091889 ↗
55. Sadyrin E, Vasiliev A, Volkov S (2020b) Mathematical modeling of experiment on Berkovich nanoindentation of ZrN coating on steel substrate. Acta Polytech CTU Proc 27:18–21. https://doi.org/10.14311/APP.2020.27.001810.14311/APP.2020.27.0018 ↗
56. Sergejev F (2006) Comparative study on indentation fracture toughness measurements of cermets and hardmetals. Euro PM 2006 Powder Metall Congr Exhib 1:43–48
57. Singh V (2016) Mechanical behaviour of silicon and quartz under various loading / unloading conditions by using nano-indentation technique. Int J Res Appl Sci Eng Technol 4:103–110
58. Trukhin AN (2019) Luminescence of natural α-quartz crystal with aluminum, alkali and noble ions impurities. J Lumin 214:116602. https://doi.org/10.1016/j.jlumin.2019.11660210.1016/j.jlumin.2019.116602 ↗
59. Vasiliev AS, Sadyrin EV, Mitrin BI, Aizikovich SM, Nikolaev AL (2018) Nanoindentation of ZrN coatings on silicon and copper substrates. Russ Eng Res 38:735–737. https://doi.org/10.3103/S1068798X1809028910.3103/S1068798X18090289 ↗
60. Warcholinski B, Gilewicz A, Kuprin AS, Tolmachova GN, Ovcharenko VD, Kuznetsova TA, Lapitskaya VA, Chizhik SA (2019) Comparison of mechanical and tribological properties of nitride and oxynitride coatings based on chrome and zirconium obtained by cathodic arc evaporation. J Frict Wear 40(2):163–170. https://doi.org/10.3103/S106836661902015610.3103/S1068366619020156 ↗
61. Weingarten C, Schmickler A, Willenborg E, Wissenbach K, Poprawe R (2017) Laser polishing and laser shape correction of optical glass. J Laser Appl 29:011702. https://doi.org/10.2351/1.497490510.2351/1.4974905 ↗
62. Whitney DL, Broz M, Cook RF (2007) Hardness, toughness, and modulus of some common metamorphic minerals. Am Mineral 92:281–288. https://doi.org/10.2138/am.2007.221210.2138/am.2007.2212 ↗
63. Xia Z, Fang F, Ahearne E, Tao M (2020) Advances in polishing of optical freeform surfaces: a review. J Mater Process Technol 286:116828. https://doi.org/10.1016/j.jmatprotec.2020.11682810.1016/j.jmatprotec.2020.116828 ↗
64. Yang X, Wang H, Peng Z, Hao J, Zhang G, Xie W, He Y (2018) Triboelectric properties of ilmenite and quartz minerals and investigation of triboelectric separation of ilmenite ore. Int J Min Sci Technol 28:223–230. https://doi.org/10.1016/j.ijmst.2018.01.00310.1016/j.ijmst.2018.01.003 ↗
65. Yu B, Li X, Dong H, Qian L (2012) Mechanical performance of friction-induced protrusive nanostructures on monocrystalline silicon and quartz. Micro Nano Lett 7:1270–1273. https://doi.org/10.1049/mnl.2012.052110.1049/mnl.2012.0521 ↗
66. Yu X, Chen X, Ding X, Zhao XA (2018) High-stability quartz crystal resonator humidity sensor based on tuning capacitor. IEEE Trans Instrum Meas 67:715–721. https://doi.org/10.1109/TIM.2017.278408210.1109/TIM.2017.2784082 ↗
67. Yuan JL, Zhao P, Ruan J, Cao ZX, Zhao WH, Xing T (2003) Lapping and polishing process for obtaining super-smooth surfaces of quartz crystal. J Mater Process Technol 138:116–119. https://doi.org/10.1016/S0924-0136(03)00058-X10.1016/S0924-0136(03)00058-X ↗
68. Zhao F, Zhou L, Fan Z, Dai Z (2018) Research on surface processing of quartz wafer based on magnetorheological finishing and ion beam figuring. Proc CIRP 71:496–499. https://doi.org/10.1016/j.procir.2018.05.01610.1016/j.procir.2018.05.016 ↗
69. Zhong ZW (2008) Recent advances in polishing of advanced materials. Mater Manuf Process 23:449–456. https://doi.org/10.1080/1042691080210348610.1080/10426910802103486 ↗
70. Zhou G, Bi Y, Ma Y, Wang L, Wang X, Yu Y, Mutzke A (2019) Large current ion beam polishing and characterization of mechanically finished titanium alloy (Ti6Al4V) surface. Appl Surf Sci 476:905–913. https://doi.org/10.1016/j.apsusc.2019.01.12010.1016/j.apsusc.2019.01.120 ↗