An analysis of deformation and failure in rectangular tensile bars accounting for void shape changes
Source abstract
Abstract
A three-dimensional finite deformation study of necking and failure in rectangular tensile bars is carried out using a constitutive relation for porous material plasticity. The fully dynamic formulation accounts for void nucleation and growth along with thermal and rate effects, but here focus is on quasi-static response with a specified initial void volume fraction. The constitutive relation takes into account void shape changes and associated void rotations for three-dimensional voids. The constitutive update is carried out using a generalized rate tangent scheme for an elastic-viscoplastic solid. The sensitivity of necking and failure patterns to the aspect ratio of the rectangular bar is investigated with focus on the plane strain limit and a square tensile bar. The calculations predict the well-known slant fracture in plane strain tension and the emergence of a cup-cone like failure region for a square cross-section. Details are provided for the development of porosity in the bar with a square cross-section, including void shape changes and void rotations. The numerical examples show the capability of a constitutive relation for porous plasticity that can model details of void evolution, thus paving the way for advanced analyses of ductile failure under arbitrary loadings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (88)
Show source-provided references
1. Agoras M, Ponte Castañeda P (2013) Iterated linear comparison bounds for viscoplastic porous materials with ellipsoidal microstructures. J Mech Phys Solids 61:701–72510.1016/j.jmps.2012.11.003 ↗
2. Aravas N, Papadioti I (2021) A non-local plasticity model for porous metals with deformation-induced anisotropy: mathematical and computational issues. J Mech Phys Solids 146:10419010.1016/j.jmps.2020.104190 ↗
3. Aravas N, Ponte Castaneda P (2004) Numerical methods for porous metals with deformation-induced anisotropy. Comput Methods Appl Mech Eng 193:3767–380510.1016/j.cma.2004.02.009 ↗
4. Bao Y, Wierzbicki T (2004) On fracture locus in the equivalent strain and stress triaxiality space. Int J Mech Sci 46:81–9810.1016/j.ijmecsci.2004.02.006 ↗
5. Barrioz PO, Hure J, Tanguy B (2019) On void shape and distribution effects on void coalescence. J Appl Mech 86:011006110.1115/1.4041548 ↗
6. Barsoum I, Faleskog J (2007a) Rupture mechanisms in combined tension and shear—experiments. Int J Solids Struct 44:1768–178610.1016/j.ijsolstr.2006.09.031 ↗
7. Barsoum I, Faleskog J (2007b) Rupture mechanisms in combined tension and shear—micromechanics. Int J Solids Struct 44:5481–549810.1016/j.ijsolstr.2007.01.010 ↗
8. Bazant Z, Pijaudier-Cabot G (1988) Non local continuum damage. localization, instability and convergence. J Appl Mech 55:287–29410.1115/1.3173674 ↗
9. Becker R, Needleman A (1986) Effect of yield surface curvature on necking and failure in porous solids. J Appl Mech 53:491–49910.1115/1.3171801 ↗
10. Becker R, Smelser RE, Richmond O (1989) The effect of void shape on the development of damage and fracture in plane-strain tension. J Mech Phys Solids 37(1):111–12910.1016/0022-5096(87)90007-X ↗
11. Belytschko T, Chiapetta RL, Bartel HD (1976) Efficient large scale non-linear transient analysis by finite elements. Int J Numer Methods Eng 10:579–59610.1002/nme.1620100308 ↗
12. Benzerga AA (2002) Micromechanics of coalescence in ductile fracture. J Mech Phys Solids 50:1331–136210.1016/S0022-5096(01)00125-9 ↗
13. Benzerga AA, Leblond JB (2010) Ductile fracture by void growth to coalescence. Adv Appl Mech 44:169–30510.1016/S0065-2156(10)44003-X ↗
14. Benzerga AA, Leblond JB (2014) Effective yield criterion accounting for microvoid coalescence. J Appl Mech 81(3):03100910.1115/1.4024908 ↗
15. Benzerga AA, Besson J, Pineau A (1999) Coalescence-controlled anisotropic ductile fracture. J Eng Mater Technol 121:221–22910.1115/1.2812369 ↗
16. Benzerga AA, Besson J, Batisse R, Pineau A (2002a) Synergistic effects of plastic anisotropy and void coalescence on fracture mode in plane strain. Model Simul Mater Sci Eng 10:73–10210.1088/0965-0393/10/1/306 ↗
17. Benzerga AA, Tvergaard V, Needleman A (2002b) Size effects in the Charpy V-notch test. Int J Fract 116:275–29610.1023/A:1020112028641 ↗
18. Benzerga AA, Besson J, Pineau A (2004a) Anisotropic ductile fracture. Part I: experiments. Acta Mater 52:4623–463810.1016/j.actamat.2004.06.020 ↗
19. Benzerga AA, Besson J, Pineau A (2004b) Anisotropic ductile fracture. Part II: theory. Acta Mater 52:4639–465010.1016/j.actamat.2004.06.019 ↗
20. Benzerga AA, Leblond JB, Needleman A, Tvergaard V (2016) Ductile failure modeling. Int J Fract 201:29–8010.1007/s10704-016-0142-6 ↗
21. Benzerga AA, Thomas N, Herrington JS (2019) Plastic flow anisotropy drives shear fracture. Sci Rep 9: Art. No. 142510.1038/s41598-018-38437-y ↗
22. Beremin FM, Pineau A, Mudry F, Devaux J, D’Escatha Y, Ledermann P (1981) Cavity formation from inclusions in ductile fracture of A508 steel. Metall Trans A 12A:723–73110.1007/BF02648336 ↗
23. Besson J, Steglich D, Brocks W (2001) Modeling of crack growth in round bars and plane strain specimens. Int J Solids Struct 38:8259–828410.1016/S0020-7683(01)00167-6 ↗
24. Besson J, Steglich D, Brocks W (2003) Modeling of plane strain ductile rupture. Int J Plast 19:1517–154110.1016/S0749-6419(02)00022-0 ↗
25. Burke MA, Nix WD (1979) Numerical study of necking in the plane tension test. Int J Solids Struct 15:379–39310.1016/0020-7683(79)90060-X ↗
26. Cazacu O, Rodríguez-Martínez J (2019) Effects of plastic anisotropy on localization in orthotropic materials: new explicit expressions for the orientation of localization bands in flat specimens subjected to uniaxial tension. J Mech Phys Solids 126:272–28410.1016/j.jmps.2019.03.002 ↗
27. Chu C, Needleman A (1980) Void nucleation effects in biaxially stretched sheets. J Eng Mater Technol 102:249–25610.1115/1.3224807 ↗
28. Danas K, Aravas N (2012) Numerical modeling of elasto-plastic porous materials with void shape effects at finite deformations. Composites B 43:2544–255910.1016/j.compositesb.2011.12.011 ↗
29. Danas K, Ponte Castañeda P (2009a) A finite-strain model for anisotropic viscoplastic porous media: I. Theory. Eur J Mech 28:387–40110.1016/j.euromechsol.2008.11.002 ↗
30. Danas K, Ponte Castañeda P (2009b) A finite-strain model for anisotropic viscoplastic porous media: II. Applications. Eur J Mech 28:402–41610.1016/j.euromechsol.2008.11.003 ↗
31. Dunand M, Mohr D (2011) On the predictive capabilities of the shear modified Gurson and the modified Mohr–Coulomb fracture models over a wide range of stress triaxialities and lode angles. J Mech Phys Solids 59:1374–139410.1016/j.jmps.2011.04.006 ↗
32. Eshelby JD (1957) The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc R Soc Lond A 241:376–39610.1098/rspa.1957.0133 ↗
33. Gologanu M, Leblond JB, Devaux J (1993) Approximate models for ductile metals containing non-spherical voids—case of axisymmetric prolate ellipsoidal cavities. J Mech Phys Solids 41(11):1723–175410.1016/0022-5096(93)90029-F ↗
34. Gologanu M, Leblond JB, Devaux J (1994) Approximate models for ductile metals containing non-spherical voids—case of axisymmetric oblate ellipsoidal cavities. J Eng Mater Technol 116:290–29710.1115/1.2904290 ↗
35. Gologanu M, Leblond JB, Perrin G, Devaux J (1997) Recent extensions of Gurson’s model for porous ductile metals. In: Suquet P (ed) Continuum micromechanics. CISM lectures series. Springer, New York, pp 61–13010.1007/978-3-7091-2662-2_2 ↗
36. Gurson AL (1977) Continuum theory of ductile rupture by void nucleation and growth: Part I. Yield criteria and flow rules for porous ductile media. J Eng Mater Technol 99:2–1510.1115/1.3443401 ↗
37. Hadamard J (1903) Chapter 6. In: Herrmann A (ed) Leçons sur la propagation des ondes et les équations de l’hydrodynamique. Librairie Scientifique, Paris
38. Haddag B, Abed-Meraim F, Balan T (2009) Strain localization analysis using a large deformation anisotropic elastic–plastic model coupled with damage. Int J Plast 25:1970–199610.1016/j.ijplas.2008.12.013 ↗
39. Hancock JW, MacKenzie AC (1976) On the mechanisms of ductile failure in high-strength steels subjected to multi-axial stress states. J Mech Phys Solids 24:147–16910.1016/0022-5096(76)90024-7 ↗
40. Hill R (1958) A general theory of uniqueness and stability in elastic–plastic solids. J Mech Phys Solids 6:236–24910.1016/0022-5096(58)90029-2 ↗
41. Hill R (1962) Acceleration waves in solids. J Mech Phys Solids 10:1–1610.1016/0022-5096(62)90024-8 ↗
42. Hill R, Hutchinson J (1975) Bifurcation phenomena in the plane tension test. J Mech Phys Solids 23:239–26410.1016/0022-5096(75)90027-7 ↗
43. Huespe A, Needleman A, Oliver J, Sánchez P (2012) A finite strain, finite band method for modeling ductile fracture. Int J Plast 28:53–6910.1016/j.ijplas.2011.05.010 ↗
44. Hutchinson J, Miles J (1974) Bifurcation analysis of the onset of necking in an elastic/plastic cylinder under uniaxial tension. J Mech Phys Solids 22:61–7110.1016/0022-5096(74)90014-3 ↗
45. Jablokov V, Goto DM, Koss DA (2001) Damage accumulation and failure of HY-100 Steel. Metall Mater Trans A 32A:2985–299410.1007/s11661-001-0173-z ↗
46. Kailasam M, Ponte Castaneda P (1998) A general constitutive theory for linear and nonlinear particulate media with microstructure evolution. J Mech Phys Solids 46(3):427–46510.1016/S0022-5096(97)00095-1 ↗
47. Keralavarma SM, Chockalingam S (2016) A criterion for void coalescence in anisotropic ductile materials. Int J Plast 82:159–17610.1016/j.ijplas.2016.03.003 ↗
48. Krieg RO, Key SW (1973) Transient shell response by numerical time integration. Int J Numer Methods Eng 7:273–28610.1002/nme.1620070305 ↗
49. Leblond JB, Perrin G, Devaux J (1994a) Bifurcation effects in ductile metals with nonlocal damage. J Appl Mech 61:236–24210.1115/1.2901435 ↗
50. Leblond JB, Perrin G, Suquet P (1994b) Exact results and approximate models for porous viscoplastic solids. Intl J Plast 10:213–22510.1016/0749-6419(94)90001-9 ↗
51. Madou K, Leblond JB (2012a) A Gurson-type criterion for porous ductile solids containing arbitrary ellipsoidal voids—I: limit-analysis of some representative cell. J Mech Phys Solids 60:1020–103610.1016/j.jmps.2011.11.008 ↗
52. Madou K, Leblond JB (2012b) A Gurson-type criterion for porous ductile solids containing arbitrary ellipsoidal voids—II: determination of yield criterion parameters. J Mech Phys Solids 60:1037–105810.1016/j.jmps.2012.01.010 ↗
53. Madou K, Leblond JB (2013) Numerical studies of porous ductile materials containing arbitrary ellipsoidal voids—I: yield surfaces of representative cells. Eur J Mech 42:480–48910.1016/j.euromechsol.2013.06.004 ↗
54. Madou K, Leblond JB, Morin L (2013) Numerical studies of porous ductile materials containing arbitrary ellipsoidal voids—II: evolution of the length and orientation of the void axes. Eur J Mech 42:490–50710.1016/j.euromechsol.2013.06.005 ↗
55. Mansouri LZ, Chalal H, Abed-Meraim F (2014) Ductility limit prediction using a GTN damage model coupled with localization bifurcation analysis. Mech Mater 76:64–9210.1016/j.mechmat.2014.06.005 ↗
56. Morin L, Leblond JB, Benzerga AA (2015) Coalescence of voids by internal necking: theoretical estimates and numerical results. J Mech Phys Solids 75:140–15810.1016/j.jmps.2014.11.009 ↗
57. Morin L, Leblond JB, Tvergaard V (2016) Application of a model of plastic porous materials including void shape effects to the prediction of ductile failure under shear-dominated loadings. J Mech Phys Solids 94:148–16610.1016/j.jmps.2016.04.032 ↗
58. Morin L, Leblond JB, Mohr D, Kondo D (2017) Prediction of shear-dominated ductile fracture in a butterfly specimen using a model of plastic porous solids including void shape effects. Eur J Mech 61:433–44210.1016/j.euromechsol.2016.10.014 ↗
59. Nahshon K, Hutchinson JW (2008) Modification of the Gurson Model for shear failure. Eur J Mech 27:1–1710.1016/j.euromechsol.2007.08.002 ↗
60. Needleman A (1972) A numerical study of necking in circular cylindrical bars. J Mech Phys Solids 20:111–12710.1016/0022-5096(72)90035-X ↗
61. Needleman A (1982) Finite elements for finite strain plasticity problems. In: Lee E, Mallett R (eds) Plasticity of metals at finite strain: theory, computations and experiments, p 387
62. Needleman A (1988) Material rate dependence and mesh sensitivity in localization problems. Comput Methods Appl Mech Eng 67:69–8510.1016/0045-7825(88)90069-2 ↗
63. Needleman A (2018) Effect of size on necking of dynamically loaded notched bars. Mech Mater 116:180–18810.1016/j.mechmat.2016.09.007 ↗
64. Needleman A, Rice JR (1978) Limits to ductility set by plastic flow localization. In: Koistinen DP, Wang NM (eds) Mechanics of sheet metal forming. Plenum Press, New York, pp 237–26710.1007/978-1-4613-2880-3_10 ↗
65. Nemcko MJ, Li J, Wilkinson DS (2016) Effects of void band orientation and crystallographic anisotropy on void growth and coalescence. J Mech Phys Solids 95:270–28310.1016/j.jmps.2016.06.003 ↗
66. Norris D, Moran B, Scudder J, Quinones D (1978) A computer simulation of the tension test. J Mech Phys Solids 26:1–1910.1016/0022-5096(78)90010-8 ↗
67. Ottosen NS, Runesson K (1991) Properties of discontinuous bifurcation solutions in elasto-plasticity. Int J Solids Struct 27:401–42110.1016/0020-7683(91)90131-X ↗
68. Pan J, Saje M, Needleman A (1983) Localization of deformation in rate sensitive porous plastic solids. Int J Fract 21:261–27810.1007/BF00942345 ↗
69. Pardoen T (2006) Numerical simulation of low stress triaxiality ductile fracture. Comput Struct 84:1641–165010.1016/j.compstruc.2006.05.001 ↗
70. Pardoen T, Hutchinson JW (2000) An extended model for void growth and coalescence. J Mech Phys Solids 48:2467–251210.1016/S0022-5096(00)00019-3 ↗
71. Peirce D, Shih CF, Needleman A (1984) A tangent modulus method for rate dependent solids. Comput Struct 18:875–88710.1016/0045-7949(84)90033-6 ↗
72. Ponte Castañeda P, Zaidman M (1994) Constitutive models for porous materials with evolving microstructure. J Mech Phys Solids 42:1459–149510.1016/0022-5096(94)90005-1 ↗
73. Rice JR (1976) The localization of plastic deformation. In: Koiter WT (ed) 14th International congress on theoretical and applied mechanics. North-Holland, Amsterdam, pp 207–220
74. Rousselier G (1987) Ductile fracture models and their potential in local approach of fracture. Nucl Eng Des 105:97–11110.1016/0029-5493(87)90234-2 ↗
75. Rudnicki JW, Rice JR (1975) Conditions for the localization of deformation in pressure-sensitive dilatant materials. J Mech Phys Solids 23:371–39410.1016/0022-5096(75)90001-0 ↗
76. Runesson K, Ottosen NS, Dunja P (1991) Discontinuous bifurcations of elastic–plastic solutions at plane stress and plane strain. Int J Plast 7:99–12110.1016/0749-6419(91)90007-L ↗
77. Speich GR, Spitzig WA (1982) Effect of volume fraction and shape of sulfide inclusions on through-thickness ductility and impact energy of high-strength 4340 plate steels. Metall Trans 13A:2239–225810.1007/BF02648395 ↗
78. Srivastava A, Ponson L, Osovski S, Bouchaud E, Tvergaard V, Needleman A (2014) Effect of inclusion density on ductile fracture toughness and roughness. J Mech Phys Solids 63:62–7910.1016/j.jmps.2013.10.003 ↗
79. Torki ME, Benzerga AA (2018) A mechanism of failure in shear bands. Extreme Mech Lett 23:67–7110.1016/j.eml.2018.06.008 ↗
80. Tvergaard V (1981) Influence of voids on shear band instabilities under plane strain conditions. Int J Fract 17:389–40710.1007/BF00036191 ↗
81. Tvergaard V (1982) On localization in ductile materials containing spherical voids. Int J Fract 18:237–25210.1007/BF00015686 ↗
82. Tvergaard V (1993) Necking in tensile bars with rectangular cross-section. Comput Methods Appl Mech Eng 103:273–29010.1016/0045-7825(93)90049-4 ↗
83. Tvergaard V (2009) Behaviour of voids in a shear field. Int J Fract 158:41–4910.1007/s10704-009-9364-1 ↗
84. Tvergaard V, Needleman A (1984) Analysis of the cup-cone fracture in a round tensile bar. Acta Metall 32:157–16910.1016/0001-6160(84)90213-X ↗
85. Tvergaard V, Needleman A (1995) Effects of nonlocal damage in porous plastic solids. Int J Solids Struct 32(8/9):1063–107710.1016/0020-7683(94)00185-Y ↗
86. Tvergaard V, Needleman A, Lo KK (1981) Flow localization in the plane strain tensile test. J Mech Phys Solids 29:115–14210.1016/0022-5096(81)90019-3 ↗
87. Willis JR (1977) Bounds and self-consistent estimates for the overall properties of anisotropic composites. J Mech Phys Solids 25:185–20210.1016/0022-5096(77)90022-9 ↗
88. Zhang Y, Lorentz E, Besson J (2018) Ductile damage modelling with locking-free regularised GTN model. Int J Numer Methods Eng 113:1871–190310.1002/nme.5722 ↗