Shear and tensile plastic behavior of austenitic steel TRIP-120 compared with martensitic steel HSLA-100
Source abstract
Abstract
The mechanical performance of TRIP-120 a novel transformation induced plasticity steel alloy, is evaluated for different loading cases and strain rates. The performance is compared with HSLA-100, a low-alloy steel developed by the United States Navy and currently used in naval hulls. The response of these materials under uniaxial tension and shear was investigated to the point of fracture at isothermal and adiabatic conditions. TRIP-120 shows a significant improvement in dissipated energy at fracture compared to HSLA-100. SEM images of ductile fracture surfaces for tensile and torsion samples of both TRIP-120 and HSLA-100 are compared, and the presence of transformed martensite in the TRIP-120 dynamic torsion specimens is confirmed with optical microscopy and magnetometry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Angel T (1954) Formation of martensite in austenitic stainless steels. J Iron Steel Inst 192: 165–174
2. Batra RC, Kim CH (1991) Effect of thermal conductivity on the initiation,growth and bandwidth of adiabatic shear bands. Int J Eng Sci 29(8): 949–96010.1016/0020-7225(91)90168-3 ↗
3. Bhandarkar D, Zackay VF, Parker ER (1972) Stability and mechanical properties of some metastable austenitic steels. Metall Trans 3: 2619–263110.1007/BF02644238 ↗
4. Curtze S, Kuokkala VT, Hokka M, Peura P (2009) Deformation behavior of TRIP and DP steels in tension at different temperatures over a wide range of strain rates. Mater Sci Eng A507: 124–13110.1016/j.msea.2008.11.050 ↗
5. Czyryca EJ, Link RE, Wong RJ, Aylor DA, Montemarano TW, Gudas JP (1990) Development and certification of HSLA-100 steel for naval ship construction-reply. Nav Eng J 102(4): 103–104
6. Czyryca EJ, Link RE, Wong RJ, Aylor DA, Montemarano TW, Gudas JP (1990) Development and certification of HSLA-100 steel for naval ship construction-reply. Nav Eng J 102(4): 104
7. Czyryca EJ, Link RE, Wong RJ, Aylor DA, Montemarano TW, Gudas JP (1990) Development and certification of HSLA-100 steel for naval ship construction. Nav Eng J 102(3): 63–8210.1111/j.1559-3584.1990.tb02632.x ↗
8. Das SK, Sivaprasad S, Das S, Chatterjee S, Tarafder S (2006) The effect of variation of microstructure on fracture mechanics parameters of HSLA-100 steel. Mater Sci Eng A-Struct Mater Prop Microstruct Process 431(1–2): 68–7910.1016/j.msea.2006.05.093 ↗
9. Densley JM, Hirth JP (1998) Mixed mode fracture of an HSLA-100 steel. Scr Mater 39(7): 881–88510.1016/S1359-6462(98)00266-8 ↗
10. Dhua SK, Mukerjee D, Sarma DS (2003) Effect of cooling rate on the As-quenched microstructure and mechanical properties of HSLA-100 steel plates. Metall Mater Trans A-Phys Metall Mater Sci 34(11): 2493–250410.1007/s11661-003-0009-0 ↗
11. Duffy J, Chi YC (1992) On the measurement of local strain and temperature during the formation of adiabatic shear band. Mater Sci Eng A-Struct Mater Prop Microstruct Process 157(2): 195–21010.1016/0921-5093(92)90026-W ↗
12. Dunne DP, Ghasemi SS, Yu D (1996) Isothermal transformation products in a Cu-bearing high strength low alloy steel. Isij Int 36(3): 324–33310.2355/isijinternational.36.324 ↗
13. Espinosa HD, Patanella AJ, Fischer M (2000) Dynamic friction measurements at sliding velocities representative of high-speed machining processes. J Tribol Trans ASME 122(4): 834–84810.1115/1.1310331 ↗
14. Espinosa HD, Patanella AJ, Fischer M (2000) A novel dynamic friction experiment using a modified Kolsky bar apparatus. Exp Mech 40(2): 138–15310.1007/BF02325039 ↗
15. Gilat A, Pao YH (1988) High-rate decremental-strain-rate test. Exp Mech 28(3): 322–32510.1007/BF02329030 ↗
16. Goodman SR, Brenner SS, Low JR (1973) FIM-Atom probe study of precipitation of copper from iron-1.4 at pct copper. 1. Field-ion microscopy. Metall Trans 4(10): 2363–236910.1007/BF02669376 ↗
17. Gray IGT (2000) ASM handbook. American Society for Metals, Materials Park
18. Haidemenopoulos GN, Olson GB, Cohen M, Tsuzaki K (1989) Transformation plasticity of retained austenite in stage-I tempered martensitic steels. Scr Metall 23(2): 207–21210.1016/0036-9748(89)90412-2 ↗
19. Haidemenopoulos GN, Grujicic M, Olson GB, Cohen M (1989) Transformation microyielding of retained austenite. Acta Metall 37(6): 1677–168210.1016/0001-6160(89)90134-X ↗
20. Hartley KA, Duffy J, Hawley RH (1987) Measurement of the temperature profile during shear band formation in steels deforming at high-strain rates. J Mech Phys Solids 35(3): 283–30110.1016/0022-5096(87)90009-3 ↗
21. Irvine KJ, Pickering FB (1963) Low-carbon steels with ferrite–pearlite structures. J Iron Steel Inst 201: 944–960
22. Kohn G (1976) Effects of TRIP phenomenon on the toughness of Heat Treatable Alloy Steels. Doctoral Thesis, University of California at Berkeley10.2172/7330906 ↗
23. Kolsky H (1949) An investigation of the mechanical properties of materials at very high rates of loading. Proc Phys Soc 62(11):676–70010.1088/0370-1301/62/11/302 ↗
24. Lacroix G, Pardoen T, Jacques PJ (2008) The fracture toughness of TRIP-assisted multiphase steels. Acta Mater 56(15): 3900–391310.1016/j.actamat.2008.04.035 ↗
25. Lee JH, Shishidou T, Zhao YJ, Freeman AJ, Olson GB (2005) Strong interface adhesion in Fe/TiC. Philosop Mag 85(31): 3683–369710.1080/14786430500199278 ↗
26. Liao SC, Duffy J (1998) Adiabatic smear bands in a Ti-6Al-4V titanium alloy. J Mech Phys Solids 46(11): 2201–223110.1016/S0022-5096(98)00044-1 ↗
27. Martineau RL, Prime MB, Duffey T (2004) Penetration of HSLA-100 steel with tungsten carbide spheres at striking velocities between 0.8 and 2.5 km/s. Int J Impact Eng 30(5): 505–52010.1016/S0734-743X(03)00080-0 ↗
28. Nichols DC (1990) Development and certification of HSLA-100 steel for naval ship construction-comment. Nav Eng J 102(4): 102–10310.1111/j.1559-3584.1990.tb02684.x ↗
29. Olson GB, Cohen M (1972) A mechanism for the strain-induced nucleation of martensitic transformations. J Less Common Metals 28(1): 107–11810.1016/0022-5088(72)90173-7 ↗
30. Olson G, Azrin M (1978) Transformation behavior of TRIP steels. Metall Mater Trans A 9(5): 713–72110.1007/BF02659928 ↗
31. Olson GB, Cohen M (1986) Mechanical properties and phase transformations in engineering materials. In: TMS-AIME, New Orleans, LA, USA
32. Olson GB (1987) Mechanically induced phase transformation in alloys. Encyclop Mater Sci Eng 4: 2929–2931
33. Olson GB (1995) Transformation plasticity and toughening. In: International seminar on mechanics and mechanisms of solid–solid phase transformations (MECAMAT 95), La Bresse, France, Editions Physique
34. Patel JR, Cohen M (1953) Criterion for the action of applied stress in the martensitic transformation. Acta Metall 1(5): 531–53810.1016/0001-6160(53)90083-2 ↗
35. Rittel D, Wang ZG (2008) Thermo-mechanical aspects of adiabatic shear failure of AM50 and Ti6Al4V alloys. Mech Mater 40(8): 629–63510.1016/j.mechmat.2008.03.002 ↗
36. Sadhukhan P (2008) Computational design and analysis of high strength austenitic TRIP steels for blast protection applications. Doctoral thesis, Department of Material Science, Northwestern University, Evanston
37. Saha A, Olson GB (2007) Computer-aided design of transformation toughened blast resistant naval hull steels: part I. J Comput-Aided Mater Design 14(2): 177–20010.1007/s10820-006-9031-z ↗
38. Saha A, Jung J, Olson GB (2007) Prototype evaluation of transformation toughened blast resistant naval hull steels: part II. Journal of Computer-Aided Materials Design 14(2): 201–23310.1007/s10820-006-9032-y ↗
39. Sawhill JM (1990) Development and certification of HSLA-100 steel for naval ship construction-comment. Nav Eng J 102(4): 103–103
40. Socrate S (1995) Mechanics of microvoid nucleation and growth in high-strength metastable austenitic steels. Doctoral thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology
41. Stavehaug F (1990) Transformation toughening of γ’-strengthened metastable austenitic Steels. Doctoral Thesis, Massachusetts Institute of Technology
42. Stringfellow RG, Parks DM, Olson GB (1992) A constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels. Acta Metall Mater 40(7): 1703–171610.1016/0956-7151(92)90114-T ↗
43. Vaynman S, Fine ME, Lee S, Espinosa HD (2006) Effect of strain rate and temperature on mechanical properties and fracture mode of high strength precipitation hardened ferritic steels. Scr Mater 55(4): 351–35410.1016/j.scriptamat.2006.04.029 ↗
44. Vaynman S, Isheim D, Kolli RP, Bhat SP, Seidman DN (2008) Fine ME high-strength low-carbon ferritic steel containing Cu-Fe-Ni-Al-Mn precipitates. Metall Mater Trans A-Phys Metall Mater Sci 39A(2): 363–37310.1007/s11661-007-9417-x ↗
45. Vernerey F, McVeigh C, Liu W, Moran B, Tewari D, Parks D, Olson G (2006) The 3-D computational modeling of shear-dominated ductile failure in steel. JOM J Miner Metals Mater Soc 58(12): 45–5110.1007/BF02748495 ↗
46. Zackay VF, Parker ER, Fahr D, Busch R (1967) Enhancement of ductility in high-strength steels. ASM Trans Q 60(2): 252–259