The effect of material model in describing mechanism of plasticity-induced crack closure under variable cyclic loading
Source abstract
Abstract
Three-dimensional finite element method is utilized to analyze the plasticity-induced crack closure (PICC) phenomenon in a cracked plate under variable amplitude loading conditions: the effect of a single spike tensile overload, and also the case of a single compressive overload (underload). To accurately capture the PICC process the choice of material model employed is of significant importance, therefore this paper considers a relatively new model, the Ellyin-Xia model, and the more widely employed kinematic hardening model. The study shows significant difference in the results obtained while employing the two models.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical stress and fatigue analysis · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. ANSYS Inc. (1997) ANSYS user’s manual for revision 5.4. volume iv, theory. Houston, Philadelphia
2. Bichler C, Pippan R (1999) Direct observation of the residual plastic deformation caused by a single tensile overload. In Advances in fatigue crack closure measurement and analysis, vol. 2 of ASTM STP1343, pp 191–206, Philadelphia10.1520/STP15758S ↗
3. Borrego LP, Ferreira JM, Pinho da Cruz JM (2003) Evaluation of overload effects on fatigue crack growth and closure. Eng Fract Mech 70(11):1379–139710.1016/S0013-7944(02)00119-4 ↗
4. Buschermohler, H, Memhard, D, Vormwald M (1996) Fatigue crack growth acceleration or retardation due to compressive overload excursions. In Fatigue ’96: proceedings of the sixth international fatigue congress, vol. 1. pp 583–588, Berlin, Germany, 6–10 May 1996.
5. Carlson RL, Kardomateas GA (1994) Effects of compressive load excursions on fatigue crack growth. Int J Fatigue 16(2):141–14610.1016/0142-1123(94)90104-X ↗
6. Chermahini RG, Shivakumar KN, Newman JC Jr (1988) Three-dimensional finite-element simulation of fatigue crack growth and closure. In Mechanics of fatigue crack closure, ASTM STP 982, pp 398–413, Philadelphia10.1520/STP27222S ↗
7. Elber W (1971) The significance of fatigue crack closure. In Damage tolerance in aircraft structure, vol. 486 of ASTM STP, pp 230–242, Philadelphia10.1520/STP26680S ↗
8. Ellyin F (1997) Fatigue damage, crack growth and life prediction. Chapman & Hall, London
9. Ellyin F, Wu J (1992) Elastic–plastic analysis of a stationary crack under cyclic loading and effect of overload. Int J Fract 56:189–20810.1007/BF00012327 ↗
10. Ellyin F, Wu J (1999) A numerical investigation on the effect of an over-load on fatigue crack opening and closure behaviour. Fatigue Fract Eng Mater Struct 22(10):835–84710.1046/j.1460-2695.1999.00223.x ↗
11. Ellyin F, Xia Z (1989) A rate-independent constitutive model for transient non-proportional loading. J Mech Phys Solids 37(1):71–9110.1016/0022-5096(87)90005-6 ↗
12. Ellyin F, Xia Z, Wu J (1992) A new elastic–plastic constitutive model insertedintothe user-supplied material model of ADINA. Comp Struct 56:189–208
13. Hammouda MMI, Ahmad SSE, Sherbini AS, Sallam HEM (1999) Deformation behaviour at the tip of a physically short fatigue crack due to a single overload. Fatigue Fract Eng Mater Struct 22(2):145–15110.1046/j.1460-2695.1999.00141.x ↗
14. Lemaitre J (ed) (2001) Handbook of materials behaviour models, in 3 volumes. Academic Press, San Diego, CA
15. McEvily AJ, Ishihara S (2002) On the development of crack closure at high R levels after an overload. Fatigue Fract Eng Mater Struct 25(11):993–99810.1046/j.1460-2695.2002.00545.x ↗
16. Meijer G, Xia Z, Ellyin F (1997) Biaxial cyclic analysis of Al2 O3p – 6061 Al composites. Acta Mater 45(8):3237–324910.1016/S1359-6454(97)00016-5 ↗
17. Ozah F, Ellyin F (2006) 3d modelling of plasticity induced fatigue crack closure. (Submitted)
18. Park SJ, Song JH (1999) Simulation of fatigue crack closure behaviour under variable-amplitude loading by a 2D finite element analysis based on the most appropriate mesh size concept. In Advances in fatigue crack closure measurement and analysis, vol. 2 of ASTM STP1343, pp 337–348, Philadelphia10.1520/STP15766S ↗
19. Pommier S, Bompard Ph (2000) Bauschinger effect of alloys and plasticity-induced crack closure: a finite element analysis. Fatigue Fract Eng Mater Struct 23:129–13910.1046/j.1460-2695.2000.00259.x ↗
20. Roychowdhury S, Dodds RH Jr (2003a) A numerical investigation of 3-d small-scale yielding fatigue crack growth. Eng Fract Mech 70(17):2363–238310.1016/S0013-7944(03)00003-1 ↗
21. Roychowdhury S, Dodds RH Jr (2003b) Three-dimensional effects on fatigue crack closure in the small-scale yielding regime -a finite element study. Fatigue Fract Eng Mater Struct 26:663–67310.1046/j.1460-2695.2003.00655.x ↗
22. Skorupa M (1998) Load interaction effects during fatigue crack growth under variable amplitude loading - a literature review. Part I: Empirical trends. Fatigue Fract Eng Mater Struct 21(8):987–100610.1046/j.1460-2695.1998.00083.x ↗
23. Skorupa M (1999) Load interaction effects during fatigue crack growth under variable amplitude loading -a literature review. Part II: Qualitative interpretation. Fatigue Fract Eng Mater Struct 22(10):905–92610.1046/j.1460-2695.1999.00158.x ↗
24. Solanki KN (2002) Two- and three-dimensional finite element analysis of plasticity-induced crack closure - a comprehensive parametric study. Master’s thesis, Mississippi State University, Mississippi
25. Stephens RR, Stephens RI, Lemm DE (1999) Role of crack closure mechanisms on fatigue crack growth of Ti-62222 under constant-amplitude and transient loading at −54, 25, and 175 o C. In Advances in fatigue crack closure measurement and analysis, vol. 2 of ASTM STP1343, pp 224–245, Philadelphia10.1520/STP15760S ↗
26. Ward-Close CM, Ritchie RO (1988) On the effect of crack closure following tensile overloads in a titanium alloy: near threshold versus higher δ_k behaviour. In Mechanics of fatigue crack closure, ASTM STP 982, pp 171–185, Philadelphia
27. Wheatley G, Hu XZ, Estrin Y (1999) Effects of a single tensile overload on fatigue crack growth in 316l steel. Fatigue Fract Eng Mater Struct 22(12):1041–105110.1046/j.1460-2695.1999.00225.x ↗
28. Wu J, Ellyin F (1996) A study of fatigue crack closure by elastic–plastic finite element analysis for constant-amplitude loading. Int J Fract 82(1):43–6510.1007/BF00017863 ↗
29. Zhang JZ, Halliday MD, Bowen P et al (1999) Three dimensional elastic–plastic finite element modeling of small fatigue crack growth under a single tensile overload. Eng Fract Mech 63(3):229–25110.1016/S0013-7944(99)00026-0 ↗