The third Sandia Fracture Challenge: deterministic and probabilistic modeling of ductile fracture of additively-manufactured material

1. Agarwala M, Bourell D, Beaman J, Marcus H, Barlow J (1995) Direct selective laser sintering of metals. Rapid Prototyp J 1(1):26–3610.1108/13552549510078113 ↗

2. Bai Y, Wierzbicki T (2010) Application of extended Mohr-Coulomb criterion to ductile fracture. Int J Fract 161(1):110.1007/s10704-009-9422-8 ↗

3. Barlat F, Brem JC, Yoon JW, Chung K, Dick RE, Lege DJ, Pourboghrat F, Choi SH, Chu E (2003) Plane stress yield function for aluminum alloy sheets–part 1: theory. Int J Plast 19(9):1297–131910.1016/S0749-6419(02)00019-0 ↗

4. Beese AM, Carroll BE (2016) Review of mechanical properties of Ti–6Al–4V made by laser-based additive manufacturing using powder feedstock. JOM 68(3):724–73410.1007/s11837-015-1759-z ↗

5. Beese AM, Wang Z, Stoica AD, Ma D (2018) Absence of dynamic strain aging in an additively manufactured nickel-base superalloy. Nat Commun 9(1):208310.1038/s41467-018-04473-5 ↗

6. Bhavar V, Kattire P, Patil V, Khot S, Gujar K, Singh R (2014) A review on powder bed fusion technology of metal additive manufacturing. In: 4th International conference and exhibition on additive manufacturing technologies-AM-2014, September, pp 1–2

7. Boyce BL, Kramer SL, Fang HE, Cordova TE, Neilsen MK, Dion K, Kaczmarowski AK, Karasz E, Xue L, Gross AJ, Ghahremaninezhad A (2014) The Sandia Fracture Challenge: blind round robin predictions of ductile tearing. Int J Fract 186(1–2):5–6810.1007/s10704-013-9904-6 ↗

8. Boyce BL, Kramer SLB, Bosiljevac TR, Corona E, Moore JA, Elkhodary K, Simha CHM, Williams BW, Cerrone AR, Nonn A, Hochhalter JD (2016) The second Sandia Fracture Challenge: predictions of ductile failure under quasi-static and moderate-rate dynamic loading. Int J Fract 198(1–2):5–10010.1007/s10704-016-0089-7 ↗

9. Brackett D, Ashcroft I, Hague R (2011) August. Topology optimization for additive manufacturing. In: Proceedings of the solid freeform fabrication symposium, Austin, TX, Vol. 1, pp. 348–362

10. Bremen S, Meiners W, Diatlov A (2012) Selective laser melting: a manufacturing technology for the future? Laser Technik J 9(2):33–3810.1002/latj.201290018 ↗

11. Erice B, Roth CC, Mohr D (2018) Stress-state and strain-rate dependent ductile fracture of dual and complex phase steel. Mech Mater 116:11–3210.1016/j.mechmat.2017.07.020 ↗

12. Foust M, Thomsen D, Stickles R, Cooper C, Dodds W (2012) Development of the GE aviation low emissions TAPS combustor for next generation aircraft engines. In: 50th AIAA aerospace sciences meeting including the new horizons forum and aerospace exposition10.2514/6.2012-936 ↗

13. Gong H, Rafi K, Gu H, Starr T, Stucker B (2014) Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes. Addit Manuf 1:87–9810.1016/j.addma.2014.08.002 ↗

14. Gorji MB, Manopulo N, Hora P, Barlat F (2016) Numerical investigation of the post-necking behavior of aluminum sheets in the presence of geometrical and material inhomogeneities. Int J Solids Struct 102:56–6510.1016/j.ijsolstr.2016.10.017 ↗

15. Gorji MB, Tancogne-Dejean T, Mohr D (2018) Heterogeneous random medium plasticity and fracture model of additively-manufactured Ti–6Al–4V. Acta Mater 148:442–45510.1016/j.actamat.2018.02.025 ↗

16. Gu D, Hagedorn YC, Meiners W, Meng G, Batista RJS, Wissenbach K, Poprawe R (2012) Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium. Acta Mater 60(9):3849–386010.1016/j.actamat.2012.04.006 ↗

17. Gurson AL (1977) Continuum theory of ductile rupture by void nucleation and growth: part I-Yield criteria and flow rules for porous ductile media. J Eng Mater Technol 99(1):2–1510.1115/1.3443401 ↗

18. Herderick ED (2017) Accelerating the additive revolution. JOM 69(3):437–43810.1007/s11837-017-2262-5 ↗

19. Hill R (1948) A theory of the yielding and plastic flow of anisotropic metals. Proc R Soc Lond A 193(1033):281–29710.1098/rspa.1948.0045 ↗

20. Hosford WF (1972) A generalized isotropic yield criterion. J Appl Mech 39(2):607–60910.1115/1.3422732 ↗

21. Johnson GR, Cook WH (1985) Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng Fract Mech 21(1):31–4810.1016/0013-7944(85)90052-9 ↗

22. Khaing MW, Fuh JYH, Lu L (2001) Direct metal laser sintering for rapid tooling: processing and characterisation of EOS parts. J Mater Process Technol 113(1–3):269–27210.1016/S0924-0136(01)00584-2 ↗

23. King WE, Anderson AT, Ferencz RM, Hodge NE, Kamath C, Khairallah SA, Rubenchik AM (2015) Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Appl Phys Rev 2(4):04130410.1063/1.4937809 ↗

24. Kramer SLB, Boyce BL, Jones A, Mostafa A, Ravaji B, Tancogne-Dejean T, Roth CC, Gorji MB, Pack K, Foster JT, Behzadinasab M, Sobotka JC, McFarland JM, Stein J, Spear AD, Newell P, Czabaj MW, Williams BW, Simha CM, Gesing M, Gilkey LN, Jones CA, Dingreville R, Sanborn SE, Bignell JL, Cerrone A, Keim V, Nonn A, Cooreman S, Thibaux P, Ames N, O’Connor DT, Parno MD, Davis B, Tucker J, Coudrillier B, Karlson KN, Ostien JT, Foulk III JW, Hammetter CI, Grange S, Emery JM, Brown JA, Bishop JE, Johnson KL, Ford KR, Brinckmann S, Neilsen MK, Jackiewicz J, Ravi-Chandar K, Ivanoff TA, Salzbrenner BC (2019) The third Sandia Fracture Challenge: predictions of ductile fracture in additively manufactured metal. Int J Fract10.1007/s10704-019-00361-1 ↗

25. Lemaitre J (1985) A continuous damage mechanics model for ductile fracture. J Eng Mater Technol 107(1):83–8910.1115/1.3225775 ↗

26. Matthews MJ, Guss G, Khairallah SA, Rubenchik AM, Depond PJ, King WE (2016) Denudation of metal powder layers in laser powder bed fusion processes. Acta Mater 114:33–4210.1016/j.actamat.2016.05.017 ↗

27. McClintock FA (1968) A criterion for ductile fracture by the growth of holes. J Appl Mech 35(2):363–37110.1115/1.3601204 ↗

28. Mohr D, Marcadet SJ (2015) Micromechanically-motivated phenomenological Hosford-Coulomb model for predicting ductile fracture initiation at low stress triaxialities. Int J Solids Struct 67:40–5510.1016/j.ijsolstr.2015.02.024 ↗

29. Mohr D, Dunand M, Kim KH (2010) Evaluation of associated and non-associated quadratic plasticity models for advanced high strength steel sheets under multi-axial loading. Int J Plast 26(7):939–95610.1016/j.ijplas.2009.11.006 ↗

30. Murr LE, Gaytan SM, Ramirez DA, Martinez E, Hernandez J, Amato KN, Shindo PW, Medina FR, Wicker RB (2012) Metal fabrication by additive manufacturing using laser and electron beam melting technologies. J Mater Sci Technol 28(1):1–1410.1016/S1005-0302(12)60016-4 ↗

31. Nahshon K, Hutchinson JW (2008) Modification of the Gurson model for shear failure. Eur J Mech A Solids 27(1):1–1710.1016/j.euromechsol.2007.08.002 ↗

32. Pack K, Luo M, Wierzbicki T (2014) Sandia Fracture Challenge: blind prediction and full calibration to enhance fracture predictability. Int J Fract 186(1–2):155–17510.1007/s10704-013-9923-3 ↗

33. Pack K, Roth CC (2016) The second Sandia Fracture Challenge: blind prediction of dynamic shear localization and full fracture characterization. Int J Fract 198(1–2):197–22010.1007/s10704-016-0091-0 ↗

34. Rafi HK, Karthik NV, Gong H, Starr TL, Stucker BE (2013) Microstructures and mechanical properties of Ti–6Al–4V parts fabricated by selective laser melting and electron beam melting. J Mater Eng Perform 22(12):3872–388310.1007/s11665-013-0658-0 ↗

35. Rice JR, Tracey DM (1969) On the ductile enlargement of voids in triaxial stress fields*. J Mech Phys Solids 17(3):201–21710.1016/0022-5096(69)90033-7 ↗

36. Roth CC, Mohr D (2014) Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: experiments and modeling. Int J Plast 56:19–4410.1016/j.ijplas.2014.01.003 ↗

37. Roth CC, Mohr D (2016) Ductile fracture experiments with locally proportional loading histories. Int J Plast 79:328–35410.1016/j.ijplas.2015.08.004 ↗

38. Salzbrenner BC, Rodelas JM, Madison JD, Jared BH, Swiler LP, Shen YL, Boyce BL (2017) High-throughput stochastic tensile performance of additively manufactured stainless steel. J Mater Process Technol 241:1–1210.1016/j.jmatprotec.2016.10.023 ↗

39. Stoughton TB (2002) A non-associated flow rule for sheet metal forming. Int J Plast 18(5–6):687–71410.1016/S0749-6419(01)00053-5 ↗

40. Sun Z, Tan X, Tor SB, Yeong WY (2016) Selective laser melting of stainless steel 316L with low porosity and high build rates. Mater Des 104:197–20410.1016/j.matdes.2016.05.035 ↗

41. Swift H (1952) Plastic instability under plane stress. J Mech Phys Solids 1(1):1–1810.1016/0022-5096(52)90002-1 ↗

42. Tancogne-Dejean T, Roth CC, Woy U, Mohr D (2016) Probabilistic fracture of Ti–6Al–4V made through additive layer manufacturing. Int J Plast 78:145–17210.1016/j.ijplas.2015.09.007 ↗

43. Tvergaard V, Needleman A (1984) Analysis of the cup-cone fracture in a round tensile bar. Acta Metall 32(1):157–16910.1016/0001-6160(84)90213-X ↗

44. Voce E (1948) The relationship between stress and strain for homogeneous deformation. J Inst Metals 74:537–562

45. Wang YM, Voisin T, McKeown JT, Ye J, Calta NP, Li Z, Zhu T (2017) Additively manufactured hierarchical stainless steels with high strength and ductility. Nat Mater 17:6310.1038/nmat5021 ↗

46. Zegard T, Paulino GH (2016) Bridging topology optimization and additive manufacturing. Struct Multidiscipl Optim 53(1):175–19210.1007/s00158-015-1274-4 ↗