An experimental method for evaluating mode II stress intensity factor from near crack tip field
Source abstract
Abstract
A new experimental approach for evaluating stress intensity factor was recently suggested by the authors (He et al. in Int J Solid Struct 78–79:131-137, 2015b). It is based on a linear relationship between the remote stress intensity factor and the out-of-plane surface displacements in the close vicinity of the vertex point. Dimensionless considerations, 3D FEM and DIC technique were attracted to establish and validate this relationship. However, these new developments were limited to through-the-thickness cracks subjected to mode I loading only. This brief note extends the above-mentioned approach to mode II and, eventually, to mixed mode loading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Anderson TL (1995) Fracture mechanics: fundamentals and applications. CRC Press, Boca Raton
2. Ayatollahi MR, Aliha MRM, Saghafi H (2011) An improved semi-circular bend specimen for investigating mixed mode brittle fracture. Eng Fract Mech 78:110–12310.1016/j.engfracmech.2010.10.001 ↗
3. Ayatollahi MR, Nejati M (2011) Experimental evaluation of stress field around the sharp notches using photoelasticity. Mater Des 32:561–56910.1016/j.matdes.2010.08.024 ↗
4. Bazant ZP, Estenssoro LF (1979) Surface singularity and crack propagation. Int J Solid Struct 15:405–42610.1016/0020-7683(79)90062-3 ↗
5. Berto F, Lazzarin P, Kotousov A (2011a) On higher order terms and out of plane singular mode. Mech Mater 43:332–34110.1016/j.mechmat.2011.03.004 ↗
6. Berto F, Lazzarin P, Kotousov A (2011b) On presence of the out-of-plane singular mode induced by plane loading with KII = KI = 0. Int J Fract 167:119–12610.1007/s10704-010-9530-5 ↗
7. Courtin S, Gardin C, Bezine G, Hamouda HBH (2005) Advantages of the J-integral approach for calculating stress intensity factors when using the commercial finite element software ABAQUS. Eng Fract Mech 72:2174–218510.1016/j.engfracmech.2005.02.003 ↗
8. Dally JW, Sanford RJ (1987) Strain-gage methods for measuring the opening-mode stress-intensity factor $$\text{ K }_{{\rm I}}$$ K I . Exp Mech 27:381–38810.1007/BF02330311 ↗
9. Dehnavi MRY, Eshraghi I, Soltani N (2013) Investigation of fracture parameters of edge V-notches in a polymer material using digital image correlation. Polym Test 32:778–78410.1016/j.polymertesting.2013.03.012 ↗
10. Desai CK, Basu S, Parameswaran V (2012) Determination of complex stress intensity factor for a crack in a bimaterial interface using digital image correlation. Opt Lasers Eng 50:1423–143010.1016/j.optlaseng.2012.05.003 ↗
11. Ewalds HL, Wanhill RJH (1984) Fracture mechanics. Edward Arnold Ltd, London
12. He Z, Kotousov A, Berto F (2015a) Effect of vertex singularities on stress intensities near plate free surfaces. Fatigue Fract Eng Mater Struct 38:860–86910.1111/ffe.12294 ↗
13. He Z, Kotousov A, Fanciulli A, Berto F, Nguyen G (2015b) On the evaluation of stress intensity factor from displacement field affected by 3D corner singularity. Int J Solid Struct 78–79:131–137
14. Kotousov A (2010) Effect of plate thickness on stress state at sharp notches and the strength paradox of thick plates. Int J Solid Struct 47:1916–192310.1016/j.ijsolstr.2010.03.029 ↗
15. Kotousov A, Lazzarin P, Berto F, Harding S (2010) Effect of the thickness on elastic deformation and quasi-brittle fracture of plate components. Eng Fract Mech 77:1665–168110.1016/j.engfracmech.2010.04.008 ↗
16. Kotousov A, Lazzarin P, Berto F, Pook LP (2013) Three-dimensional stress states at crack tip induced by shear and anti-plane loading. Eng Fract Mech 108:65–7410.1016/j.engfracmech.2013.04.010 ↗
17. Kotousov A, Tan PJ (2004) Effect of the plate thickness on the out-of-plane displacement field of a cracked elastic plate loaded in mode I. Int J Fract 127:L97–L10310.1023/B:FRAC.0000035082.10798.5f ↗
18. Kwon SW, Sun CT (2000) Characteristics of three-dimensional stress field in plates with a through-the thickness crack. Int J Fract 104:291–315
19. Lim I, Johnston IW, Choi SK (1992) On stress intensity factor computation from the quarter-point element displacements. Commun Appl Numer Methods 8:291–30010.1002/cnm.1630080503 ↗
20. McCormick N, Lord J (2010) Digital image correlation. Mater Today 13:52–5410.1016/S1369-7021(10)70235-2 ↗
21. McNeill SR, Peters WH, Sutton MA (1987) Estimation of stress intensity factor by digital image correlation. Eng Fract Mech 28:101–11210.1016/0013-7944(87)90124-X ↗
22. Nakamura T, Parks DM (1988) Three-dimensional stress field near the crack front of a thin elastic plate. J Appl Mech 55:805–81310.1115/1.3173725 ↗
23. Pfaff RD, Washabaugh PD, Knauss WG (1995) An interpretation of Twyman-Green interferograms from static and dynamic fracture experiments. Int J Solid Struct 32:939–95510.1016/0020-7683(94)00170-2 ↗
24. Pook LP (1994) Some implications of corner point singularities. Eng Fract Mech 48:367–37810.1016/0013-7944(94)90127-9 ↗
25. Pook LP (2000) Crack profiles and corner point singularities. Fatigue Fract Eng Mater Struct 23:141–15010.1046/j.1460-2695.2000.00249.x ↗
26. Pook LP (2013) A 50 year retrospective review of three dimensional effects at cracks and sharp notches. Fatigue Fract Eng Mater Struct 36:699–72310.1111/ffe.12074 ↗
27. Ravi-Chandar K (2004) Dynamic fracture, 1st edn. Elsevier, Amsterdam
28. Ravi-Chandar K (2008) Fracture mechanics. In: Sharpe WN (ed) Springer handbook of experimental solid mechanics. Springer, New York, pp 125–15810.1007/978-0-387-30877-7_5 ↗
29. Rosakis AJ, Ravi-Chandar K (1986) On crack-tip stress state: an experimental evaluation of three-dimensional effects. Int J Solids Struct 22:121–13410.1016/0020-7683(86)90002-8 ↗
30. Sutton A, Orteu JJ, Schreier HW (2009) Image correlation for shape motion and deformation measurements. Springer, New York
31. Theocaris PS, Gdoutos E (1972) An optical method for determining opening-mode and edge sliding-mode stress-intensity factors. J Appl Mech 39:91–9710.1115/1.3422676 ↗
32. Williams ML (1957) On the stress distribution at the base of a stationary crack. J Appl Mech 24:109–11410.1115/1.4011454 ↗
33. Yang W, Freund LB (1985) Transverse shear effects for through-cracks in an elastic plate. Int J Solids Struct 21:977–99410.1016/0020-7683(85)90111-8 ↗
34. Yoneyama S, Morimoto Y, Takashi M (2006) Automatic evaluation of mixed-mode stress intensity factors utilizing digital image correlation. Strain 42:21–2910.1111/j.1475-1305.2006.00246.x ↗
35. Zhang R, He L (2012) Measurement of mixed-mode stress intensity factors using digital image correlation method. Opt Lasers Eng 50:1001–100710.1016/j.optlaseng.2012.01.009 ↗
36. Zhu WX, Smith DJ (1995) On the use of displacement extrapolation to obtain crack tip singular stresses and stress intensity factors. Eng Fract Mech 51:391–40010.1016/0013-7944(94)00319-D ↗