ISSF method to evaluate adhesive strength when two distinct singular stress fields appear along the interface
Source abstract
Abstract
Previous studies show that the adhesive strength can be expressed as a constant value of the critical ISSF (Intensity of Singular Stress Field) for several butt joints and lap joints. This study deals with the scarf joints where two distinct singular stress fields appear at the interface end. How to evaluate the scarf joint strength is described in comparison with the lap joint where two singular stress fields appear but the second singular stress field is weak. It is found that the adhesive strength of the scraf joints can also be expressed as a constant value of one of the ISSF like other joints. When two singular stress fields are comparable, the debonding strength of the scarf joints can be expressed at a certain point of the sum of the two singular stress fields as ({sigma } heta c(10mathrm{mu m})) = const.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Adams RD, Coppendale J, Peppiatt NA (1978) Stress analysis of axisymmetric butt joints loaded in torsion and tension. J Strain Analysis Eng Design 13(1):1–13. https://doi.org/10.1243/03093247V13100110.1243/03093247V131001 ↗
2. Akisanya AR, Meng CS (2003) Initiation of fracture at the interface corner of bi-material joints. J Mech Phys Sol 51:27–46. https://doi.org/10.1016/S0022-5096(02)00076-510.1016/S0022-5096(02)00076-5 ↗
3. Barnes TA, Pashby IR (2000) Joining techniques for aluminum spaceframes used in automobiles: part II–adhesive bonding and mechanical fasteners. J Mater Process Technol 99:72–79. https://doi.org/10.1016/S0924-0136(99)00361-110.1016/S0924-0136(99)00361-1 ↗
4. Bogy DB (1968) Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading. Trans ASME, J Appl Mech 35:460–466. https://doi.org/10.1115/1.360123610.1115/1.3601236 ↗
5. Bogy DB (1971) Two Edge-bonded elastic wedges of different materials and wedge angles under surface tractions. Trans ASME J Appl Mech 38:377–386. https://doi.org/10.1115/1.340878610.1115/1.3408786 ↗
6. Bogy DB (1975) The plane solution for joined dissimilar elastic semistrips under tensions. J Appl Mech 42:93–98. https://doi.org/10.1115/1.342356010.1115/1.3423560 ↗
7. Carpenter WC (1987) A path independent integral for computing stress intensities for V-notched cracks in a bi-material. Int J Fract 35:245–268. https://doi.org/10.1007/BF0027635610.1007/BF00276356 ↗
8. Chen DH, Nisitani H (1993) Singular stress field near the corner of jointed dissimilar materials. Trans ASME, J Appl Mech 60(3):607–613. https://doi.org/10.1115/1.290084710.1115/1.2900847 ↗
9. Comninou M, Dundurs J (1979) A closed crack tip terminating at an interface. J Appl Mech 46:97–100. https://doi.org/10.1115/1.342453510.1115/1.3424535 ↗
10. Dundurs J (1969) Elastic interaction of dislocations with inhomogeneities Mathematical theory of dislocations. ASME, New York
11. Galvez P, Noda NA, Takaki R, Sano Y, Miyazaki T, Abenojar J, Martínez MA (2019) Intensity of singular stress field (ISSF) variation as a function of the Young’s modulus in single lap adhesive joints. Int J Adhes Adhes 95:102418. https://doi.org/10.1016/j.ijadhadh.2019.10241810.1016/j.ijadhadh.2019.102418 ↗
12. Hattori T, Sakata S, Hatsuta T, Murakami H (1988) A stress singularity parameters approach for evaluating adhesive strength. Trans JSME Ser A 54(499):597–603. https://doi.org/10.1299/jsmemag.92.846_385_2. (in Japanese)10.1299/jsmemag.92.846_385_2 ↗
13. Hein VL, Erdogan F (1971) Stress singularity in a two materials wedge. Int J Fract Mech 7:317–329. https://doi.org/10.1007/BF0018430710.1007/BF00184307 ↗
14. Higgins A (2000) Adhesive bonding of aircraft structures. Int J Adhes Adhes 20(5):367–376. https://doi.org/10.1016/S0143-7496(00)00006-310.1016/S0143-7496(00)00006-3 ↗
15. Huang Z, Kumar P, Dutta I, Pang JHL, Sidhu R (2014) A general methodology for calculating mixed mode stress intensity factors and fracture toughness of solder joints with interfacial cracks. Eng Fract Mech 131:9–25. https://doi.org/10.1016/j.engfracmech.2014.10.00310.1016/j.engfracmech.2014.10.003 ↗
16. Iancu OT, Fett T, Munz D (1990) A fracture mechanical treatment of gree edge stress singularities applied to a braged ceramic/metal compound. Int J Fract 46:159–170. https://doi.org/10.1007/BF0001793010.1007/BF00017930 ↗
17. Ioka S, Kubo S (2006) Free-edge stress singularity in bonded dissimilar orthotropic materials under thermal stress loading. Trans JSME Ser A 72:723. https://doi.org/10.1299/kikaia.72.1607. (in Japanese)10.1299/kikaia.72.1607 ↗
18. Kitamura T, Shibutani T, Ueno T (2000) Development of evaluation method for interface strength between thin films and its application on delamination of Su/TaN in an advanced LSI. Trans Jpn Soc Mech Eng A 66(648):1568–1573. https://doi.org/10.1299/kikaia.66.1568. (in Japanese)10.1299/kikaia.66.1568 ↗
19. Kitasako Y, Burrow MF, Nikaido T, Harada N, Inokoshi S, Yamada T, Takatsu T (1995) Shear and tensile bond testing for resin cement evaluation. Dent Mater 11(5–6):298–304. https://doi.org/10.1016/0109-5641(95)80024-710.1016/0109-5641(95)80024-7 ↗
20. Kubo S, Ohji K, Nakai Y (1991) Free-Edge singularities in edge-bonded elastic dissimilar wedges (geometrical conditions for appearance and disappearance of stress singularities), Rep. 61st meeting of the committee on Fract Mech Soc Material Science, Japan, 39(4): 13–17
21. Li R, Noda NA, Takaki R, Sano Y, Takase Y, Miyazaki T (2018) Most suitable evaluation method for adhesive strength to minimize bend effedt in lap joints in terms of the intensity of singular stress field. Int J Adhes Adhes 86:45–58. https://doi.org/10.1016/j.ijadhadh.2018.08.00610.1016/j.ijadhadh.2018.08.006 ↗
22. Lin KY, Mar JW (1976) Finite element analysis of stress intensity factors for cracks at a bimatrial interface. Int J Frac 12(4):521–531. https://doi.org/10.1007/BF0003463810.1007/BF00034638 ↗
23. Liu ZX, Huang YA, Yin ZP, Bennati S, Valvo PS (2014) A general solution for the two-dimensional stress analysis of balanced and unbalanced adhesively bonded joints. Int J Adhes Adhes 54:112–123. https://doi.org/10.1016/j.ijadhadh.2014.05.01110.1016/j.ijadhadh.2014.05.011 ↗
24. Luangarpa C, Koguchi H (2020) Singular stresses at a vertex and along a singular line in three-dimensional piezoelectric bonded joints. J Appl Comput Mech 6:1364–1370. https://doi.org/10.22055/JACM.2020.33956.237910.22055/JACM.2020.33956.2379 ↗
25. Luangarpa C, Koguchi H (2018) Evaluation of intensities of singularity at three-dimensional piezoelectric bonded joints using a conservative integral. Eur J Mech, A/Solids 72:198–208. https://doi.org/10.1016/j.euromechsol.2018.05.01210.1016/j.euromechsol.2018.05.012 ↗
26. Mintzas A, Nowell D (2012) Validation of an Hcr -based fracture initiation criterion for adhesively bonded joints. Eng Fract Mech 80:13–27. https://doi.org/10.1016/j.engfracmech.2011.09.02010.1016/j.engfracmech.2011.09.020 ↗
27. Miyazaki T, Noda NA, Ren F, Wang Z, Sano Y, Iida K (2017) Analysis of intensity of singular stress field for bonded cylinder and bonded pipe in comparison with bonded plate. Int J Adhes Adhes 77:118–137. https://doi.org/10.1016/j.ijadhadh.2017.03.01910.1016/j.ijadhadh.2017.03.019 ↗
28. Miyazaki T, Noda NA (2017) Evaluation of debonding strength of single lap joint by the intensity of singular stress field. J Phys 843(1):012006. https://doi.org/10.1088/1742-6596/842/1/01207810.1088/1742-6596/842/1/012078 ↗
29. Miyazaki T, Noda NA, Sano Y (2018) A precise and efficient analytical method to obtain two distinct intensities of singular stress fields for single lap joint. J Jpn Inst Electron Packag 21(2):166–177. https://doi.org/10.5104/jiep.21.166. (in Japanese)10.5104/jiep.21.166 ↗
30. Naito K, Onta M, Kogo Y (2012) The effect of adhesive thickness on tensile and shear strength of polyimide adhesive. Int J Adhes Adhes 36:77–85. https://doi.org/10.1016/j.ijadhadh.2012.03.00710.1016/j.ijadhadh.2012.03.007 ↗
31. Noda NA, Miyazaki T, Li R, Uchikoba T, Sano Y, Takase Y (2015) Debonding strength evaluation in terms of the intensity of singular stress at the corner with and without fictitious crack. Int J Adhes 61:46–64. https://doi.org/10.1016/j.ijadhadh.2015.04.00510.1016/j.ijadhadh.2015.04.005 ↗
32. Noda NA, Ren F, Takaki R, Wang Z, Oda K, Miyazaki T, Sano Y (2018) Intensity of singular stress field over the entire bond line thickness range useful for evaluating the adhesive strength for plate and cylinder butt joints. Int J Adhes Adhes 85:234–250. https://doi.org/10.1016/j.ijadhadh.2018.05.01310.1016/j.ijadhadh.2018.05.013 ↗
33. Noda NA, LiMiyazaki RT, Takaki R, Sano Y (2019) Convenient adhesive strength evaluation metho-d in terms of the intensity of singular stress field. Int J Comput Method 16(1):1850085. https://doi.org/10.1142/S021987621850085810.1142/S0219876218500858 ↗
34. Park JH, Choi JH, Kweon JH (2010) Evaluating the strengths of thick aluminum-to-aluminum joints with different adhesive lengths and thicknesses. Compos Struct 92:2226–2235. https://doi.org/10.1016/j.compstruct.2009.08.03710.1016/j.compstruct.2009.08.037 ↗
35. Petrie EM (2008) Adhesives for the assembly of aircraft structures and components: decades of performance improvement, with the new applications of the horizon. Met Finish 106(2):26–31. https://doi.org/10.1016/S0026-0576(08)80035-910.1016/S0026-0576(08)80035-9 ↗
36. Qian Z, Akisanya AR (1998) An experimental investigation of failure initiation in bonded joints. Acta Mater 46(14):4895–4904. https://doi.org/10.1016/S1359-6454(98)00200-610.1016/S1359-6454(98)00200-6 ↗
37. Sibutani T, Tsuruga T, Yu Q, Shiratori M (2003) Criteria of crack initiation at edge of interface between thin films in poening and sliding modes for an advanced LSI. Trans Jpn Soc Mech Eng A 69(685):1368–1373. https://doi.org/10.1299/kikaia.69.1368. (in Japanese)10.1299/kikaia.69.1368 ↗
38. Suzuki Y (1984) Adhesive tensile strength of scarf and butt joints of steel plates (1st report, a case of brittle adhesives). Bullet JSME 27(233):2372–2379. https://doi.org/10.1299/jsme1958.27.237210.1299/jsme1958.27.2372 ↗
39. Suzuki Y (1985) Adhesive strength of scarf and butt joints of steel plates (2nd report, Relationship between mechanical properties of adhesives and fracture criteria of joints). Bull JSME 28(245):2575–258410.1299/jsme1958.28.2575 ↗
40. Suzuki Y (1987) Adhesive tensile strengths of scarf and butt joints of steel plates (relation between adhesive layer thicknesses and adhesive strengths of joints). JSME Int J 30(265):1042–1051. https://doi.org/10.1299/jsme1987.30.104210.1299/jsme1987.30.1042 ↗
41. Takaki R, Noda NA, Ren F, Sano Y, Takase Y, Miyazaki T, Suzuki Y, Lan X (2020) Variation of intensity of singular stress field (ISSF) along the interface outer edge of prismatic butt joint and debonding condition expressed by the ISSF. Int J Adhes Adhes 102:102665. https://doi.org/10.1016/j.ijadhadh.2020.10266510.1016/j.ijadhadh.2020.102665 ↗
42. Takaki R, Noda NA, Sano Y, Takase Y, Suzuki Y, Chao CK (2021) Fractographic identification of fracture origin mainly controlled by the intensity of singular stress field (ISSF) in prismatic butt joint with corner fillet. Int J Adhes Adhes 106:102810. https://doi.org/10.1016/j.ijadhadh.2021.10281010.1016/j.ijadhadh.2021.102810 ↗
43. Takaki R, Noda NA, Suzuki Y, Sano Y, Hirata K, Ito F (2022) Cohesive failure verification and fracture origin identification when the adhesive strength is expressed as a constant ISSF. Int J Adhes Adhes 116:103148. https://doi.org/10.1016/j.ijadhadh.2022.10314810.1016/j.ijadhadh.2022.103148 ↗
44. Uddin MA, Ali MY, Chan HP (2009) Achieving optimum adhesion of conductive adhesive bonded flip-chip on flex packages. Rev Adv Mater Sci 21(2):165–172
45. William ML (1959) The stress around a fault or crack in dissimilar media. Bull Seismol Soc Am 49(2):199–204. https://doi.org/10.1785/BSSA049002019910.1785/BSSA0490020199 ↗
46. Yuki R, Xu JQ, Liu JQ (1992) Analysis of stress singularity at interface edge in dissimilar materials. Mon J Indust Sci 44(4):206–210 [in Japanese]
47. Yuki R, Ishikawa H, Kishimoto K, Xu JQ (1993) Mechanics of interface, Baifukan, Tokyo, pp 24–38 [in Japanese]
48. Zhang Y, Noda NA, Wu P, Duan ML (2015a) A mesh-independent technique to evaluate stress singularities in adhesive joints. Int J Adhes Adhes 57:105–117. https://doi.org/10.1016/j.ijadhadh.2014.12.00310.1016/j.ijadhadh.2014.12.003 ↗
49. Zhang Y, Noda NA, Wu P, Duan ML (2015b) Corrigendum of authorship “A mesh-independent technique to evaluate stress singularities in adhesive joints. Int J Adhes Adhes 60:130. https://doi.org/10.1016/j.ijadhadh.2015.05.00410.1016/j.ijadhadh.2015.05.004 ↗