A thermomechanical fracture modeling and simulation for functionally graded solids using a residual-strain formulation
Source abstract
Abstract
This paper addresses mixed-mode crack growth in two-dimensional functionally graded solids under thermomechanical loads, and investigates the effect of mechanical and thermal loads as well as the T-stress on their crack growth behavior. A novel residual strain-based formulation in the interaction integral method is developed and used for the accurate evaluation of mixed-mode stress intensity factors and/or the T-stress. Simulation of mixed-mode crack propagation in functionally graded materials including solid oxide fuel cells under thermomechanical loads is performed by means of the finite element method and the generalized interaction integrals in conjunction with a remeshing algorithm. An iterative procedure is used for crack growth simulation including the calculation of mixed-mode stress intensity factors and/or the T-stress by means of the generalized interaction integral method, determination of crack growth direction and crack initiation condition based on selected fracture criteria, and local automatic remeshing along the crack path. The present approach employs a user-defined crack increment at the beginning of the simulation. Crack trajectories and fracture parameters obtained by the present simulation for thermomechanical loads are assessed for some numerical examples in comparison with those for mechanical loads.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Numerical methods in engineering · Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Abanto-Bueno J, Lambros J (2002) Investigation of crack growth in functionally graded materials using digital image correlation. Eng Fract Mech 69(14–16): 1695–171110.1016/S0013-7944(02)00058-9 ↗
2. Anderson TL (1995) Fracture mechanics: fundamentals and applications. CRC Press LLC, Boca Raton
3. Barthel K, Rambert C (1999) Thermal spraying and performance of graded composite cathodes as SOFC-component. Mater Sci Forum 308(311): 800–80510.4028/www.scientific.net/MSF.308-311.800 ↗
4. Bittencourt TN, Wawrzynek PA, Ingraffea AR (1996) Quasi-static simulation of crack propagation for 2D LEFM problems. Eng Fract Mech 55(2): 321–33410.1016/0013-7944(95)00247-2 ↗
5. Cannillo V, Montorsi M, Siligardi C, Sola A, de Portu G, Micele L, Pezzotti G (2006) Microscale computational simulation and experimental measurement of thermal residual stresses in glass-alumina functionally graded materials. J Eur Ceram Soc 26: 1411–141910.1016/j.jeurceramsoc.2005.02.012 ↗
6. Carpenter RD, Liang WW, Paulino GH, Gibeling JC, Munir ZA (1999) Fracture testing and analysis of a layered functionally graded Ti/TiB beam in 3-point bending. Mater Sci Forum 308–311: 837–84210.4028/www.scientific.net/MSF.308-311.837 ↗
7. Comi C, Mariani S (2007) Extended finite element simulation of quasi-brittle fracture in functionally graded materials. Comput Methods Appl Mech Eng 196(41–44): 4013–402610.1016/j.cma.2007.02.014 ↗
8. Cotterell B, Rice JR (1980) Slightly curved or kinked cracks. Int J Fract 16(2): 155–16910.1007/BF00012619 ↗
9. Desplat JL (1996) Recent development on oxigenated thermionic energy converter—overview. In: Proceedings of the fourth international symposium on functionally gradient materials, Tsukuba City, Japan
10. Dolbow JE, Gosz M (2002) On the computation of mixed-mode stress intensity factors in functionally graded materials. Int J Solids Struct 39(9): 2557–257410.1016/S0020-7683(02)00114-2 ↗
11. Eftis J, Subramonian N, Liebowitz H (1977) Crack border stress and displacement equations revisited. Eng Fract Mech 9(1): 189–21010.1016/0013-7944(77)90063-7 ↗
12. Eischen JW (1987) Fracture of non-homogeneous materials. Int J Fract 34(1): 3–2210.1007/BF00042121 ↗
13. Erdogan F, Sih GC (1963) On the crack extension in plates under plane loading and transverse shear. ASME J Basic Eng 85(4): 519–52710.1115/1.3656897 ↗
14. Erdogan F, Wu BH (1996) Crack problems in FGM layers under thermal stresses. J Thermal Stresses 19(3): 237–26510.1080/01495739608946172 ↗
15. Erdogan F, Wu BH (1997) The surface crack problem for a plate with functionally graded properties. J Appl Mech Trans ASME 64(3): 449–45610.1115/1.2788914 ↗
16. Getto H, Ishihara SJ (1996) Development of the fire retardant door with functional gradient wood. In: Proceedings of the fourth international symposium on functionally gradient materials, Tsukuba City, Japan
17. Gu L-C, Noda N, Wu L (2008) Thermal fracture model for a functionally graded plate with a crack normal to the syrfaces and arbitrary thermomechanical properties. Compos Sci Technol 68: 1034–104110.1016/j.compscitech.2007.07.003 ↗
18. Gu P, Asaro RJ (1997) Crack deflection in functionally graded materials. Int J Solids Struct 34(24): 3085–309810.1016/S0020-7683(96)00175-8 ↗
19. Hart NT, Brandon NP, Day MJ, Shemilt JE (2001) Functionally graded cathodes for solid oxide fuel cells. J Mater Sci 36: 1077–108510.1023/A:1004857104328 ↗
20. Hart NT, Brandon NP, Day MJ, Lapena-Rey N (2002) Functionally graded composite cathodes for solid oxide fuel cells. J Power Sources 106: 42–5010.1016/S0378-7753(01)01035-7 ↗
21. Hirano T, Teraki J, Yamada T (1990) On the design of functionally gradient materials. In: Yamanouochi M, Koizumi M, Hirai T, Shiota I (eds) Proceedings of the first international symposium on functionally gradient materials. Sendai, Japan, pp 5–10
22. Holtappels P, Bagger C (2002) Fabrication and performance of advanced multi-layer SOFC cathodes. J Eur Ceram Soc 22: 41–4810.1016/S0955-2219(01)00238-2 ↗
23. Hussain MA, Pu SL, Underwood J (1974) Strain energy release rate for a crack under combined mode I and mode II. In: Paris PC, Irwin GR (eds) Fracture analysis ASTM STP 560. American Society for Testing and Materials, Philadelphia, pp 2–28
24. Hutchinson JW, Suo Z (1992) Mixed mode cracking in layered materials. Adv Appl Mech 29: 63–19110.1016/S0065-2156(08)70164-9 ↗
25. Igari T, Notomi A, Tsunoda H, Hida K, Kotoh T, Kunishima S (1990) Material properties of functionally gradient material for fast breeder reactor. In: Yamanouochi M, Koizumi M, Hirai T, Shiota I (eds) Proceedings of the first international symposium on functionally gradient materials. Sendai, Japan, pp 209–214
26. Ilschner B (1996) Processing-microstructure-property relationships in graded materials. J Mech Phys Solids 44(5): 647–65610.1016/0022-5096(96)00023-3 ↗
27. Ivers-Tiffee E, Weber A, Herbstritt D (2001) Materials and technologies for sofc-components. J Eur Ceram Soc 21: 1805–181110.1016/S0955-2219(01)00120-0 ↗
28. Jin Z-H, Feng YZ (2008) Thermal fracture resistance of a functionally graded coating with periodic edge cracks. Surf Coat Technol 202: 4189–419710.1016/j.surfcoat.2008.03.009 ↗
29. Jin Z-H, Paulino GH, Dodds RH Jr (2002) Finite element investigation of quasi-static crack growth in functionally graded materials using a novel cohesive zone fracture model. J Appl Mech Trans ASME 69(3): 370–37910.1115/1.1467092 ↗
30. Kawasaki A, Watanabe R (2002) Thermal fracture behavior of metal/ceramic functionally graded materials. Eng Fract Mech 69: 1713–172810.1016/S0013-7944(02)00054-1 ↗
31. KC A, Kim J-H (2008) Interaction integrals for thermal fracture of functionally graded materials. Eng Fract Mech 75: 2542–256510.1016/j.engfracmech.2007.07.011 ↗
32. Kim J-H (2003) Mixed-mode crack propagation in functionally graded materials. Ph.D. Thesis, University of Illinois at Urbana-Champaign
33. Kim J-H, Paulino GH (2002) Isoparametric graded finite elements for nonhomogeneous isotropic and orthotropic materials. J Appl Mech Trans ASME 69(4): 502–51410.1115/1.1467094 ↗
34. Kim J-H, Paulino GH (2003) An accurate scheme for mixed-mode fracture analysis of functionally graded materials using the interaction integral and micromechanics models. Int J Numer Methods Eng 58(10): 1457–149710.1002/nme.819 ↗
35. Kim J-H, Paulino GH (2003) The interaction integral for fracture of orthotropic functionally graded materials: Evaluation of stress intensity factors. Int J Solids Struct 40(15): 3967–400110.1016/S0020-7683(03)00176-8 ↗
36. Kim J-H, Paulino GH (2004) Simulation of crack propagation in functionally graded materials under mixed-mode and non-proportional loading. Int J Mech Mater Des 1: 63–9410.1023/B:MAMD.0000035457.78797.c5 ↗
37. Kim J-H, Paulino GH (2005) Consistent formulations of the interaction integral method for fracture of functionally graded materials. J Appl Mech Trans ASME 72: 351–36410.1115/1.1876395 ↗
38. Koike Y (1992) Graded-index and single mode polymer optical fibers. In: Chiang LY, Garito AG, Sandman DJ (eds) Electrical, optical, and magnetic properties of organic solid state materials, vol. 247, Materials Research Society Proceedings, Pittsburgh, PA, p 81710.1557/PROC-247-817 ↗
39. Konda N, Erdogan F (1994) The mixed mode crack problem in a nonhomogeneous elastic medium. Eng Fract Mech 47(4): 533–54510.1016/0013-7944(94)90253-4 ↗
40. Lambros J, Cheeseman BA, Santare MH (2000) Experimental investigation of the quasi-static fracture of functionally graded materials. Int J Solids Struct 37(27): 3715–373210.1016/S0020-7683(99)00056-6 ↗
41. Lin CY, McShane HB, Rawlings RD (1994) Structure and properties of functionally gradient aluminium alloy 2124/SiC composites. Mater Sci Technol 10(7): 659–66410.1179/mst.1994.10.7.659 ↗
42. Lui Y, Compson C, Lui M (2004) Nanostructured and functionally graded cathodes for intermediate temperature solid oxide fuel cells. J Power Sources 138: 194–19810.1016/j.jpowsour.2004.06.035 ↗
43. Michell JH (1900) Elementary distributions of plane stress. Proc Lond Math Soc 32: 35–61
44. Noda N (1999) Thermal stresses in functionally graded materials. J Thermal Stresses 22(4–5): 477–51210.1080/014957399280841 ↗
45. Oonishi H, Noda T, Ito S, Kohda A, Ishimaru H, Yamamoto M, Tsuji E (1994) Effect of hydroxyapatite coating on bone growth into porous titanium alloy implants under loaded conditions. J Appl Biomater 5(1): 23–2710.1002/jab.770050105 ↗
46. Oral A, Lambros J, Anlas G. (2008) Crack initiation in functionally graded materials under mixed mode loading: experiments and simulations. J Appl Mech Trans ASME 75(5):051100 (8 pages)10.1115/1.2936238 ↗
47. Osaka T, Matsubara H, Homma T, Mitamura S, Noda K (1990) Microstructural study of electroless-plated CoNiReP/NiMoP double-layered media for perpendicular magnetic recording. Jap J Appl Phys 29(10): 1939–194310.1143/JJAP.29.1939 ↗
48. Palaniswamy K, Knauss WG (1978) On the problem of crack extension in brittle solids under general loading. In: Nemat-Nasser S (eds) Mechanics today vol. 4. Pergamon Press, Oxford, pp 87–14810.1016/B978-0-08-021792-5.50010-0 ↗
49. Paulino GH, Dong Z A novel application of the singular integral equation approach to evaluate T-stress in functionally graded materials. Unknown, in preparation
50. Paulino GH, Kim J-H (2004) A new approach to compute T-stress in functionally graded materials using the interaction integral method. Eng Fract Mech 71(13–14): 1907–195010.1016/j.engfracmech.2003.11.005 ↗
51. Paulino GH, Kim J-H (2005) On the Poisson’s ratio effect on mixed-mode stress intensity factors and T-stress in functionally graded materials. Int J Comput Eng Sci 5(4): 833–86110.1142/S1465876304002691 ↗
52. Paulino GH, Kim J-H (2005) On accurate numerical evaluation of stress intensity factors and T-stress in functionally graded materials. Mater Sci Forum 492(493): 403–408
53. Raju IS, Shivakumar KN (1990) An equivalent domain integral method in the two-dimensional analysis of mixed mode crack problems. Eng Fract Mech 37(4): 707–72510.1016/0013-7944(90)90070-W ↗
54. Rao BN, Rahman S (2003) Mesh-free analysis of cracks in isotropic functionally graded materials. Eng Fract Mech 70(1): 1–2710.1016/S0013-7944(02)00038-3 ↗
55. Rice JR (1968) A path-independent integral and the approximate analysis of strain concentration by notches and cracks. J Appl Mech Trans ASME 35(2): 379–38610.1115/1.3601206 ↗
56. Rousseau C-E, Tippur HV (2000) Compositionally graded materials with cracks normal to the elastic gradient. Acta Materialia 48(16): 4021–403310.1016/S1359-6454(00)00202-0 ↗
57. Sih GC (1974) Strain energy density factor applied to mixed mode crack problems. Int J Fract 10(3): 305–32110.1007/BF00035493 ↗
58. Sladek J, Sladek V, Zhang Ch (2008) Evaluation of the stress intensity factors for cracks in continuously nonhomogeneous solids, part i: interaction integral for elastodynamics and thermoelasticity. Mech Adv Mater Struct 15: 438–44310.1080/15376490802138351 ↗
59. Sladek J, Sladek V, Zhang Ch, Tan CL (2006) Evaluation of fracture parameters for crack problems in fgm by a meshless method. J Theor Appl Mech 44: 603–636
60. Smith DJ, Ayatollahi MR, Pavier MJ (2001) The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading. Fatigue Fract Eng Mater Struct 24(2): 137–15010.1046/j.1460-2695.2001.00377.x ↗
61. Tilbrook MT, Moon RJ, Hoffman M (2005) Crack propagation in graded composites. Compos Sci Technol 65: 201–22010.1016/j.compscitech.2004.07.004 ↗
62. Tilbrook MT, Moon RJ, Hoffman M (2005) Finite element simulations of crack propagation in functionally graded materials under flexural loading. Eng Fract Mech 72: 2444–246710.1016/j.engfracmech.2005.04.001 ↗
63. Ueda Y, Ikeda K, Yao T, Aoki M (1983) Characteristics of brittle failure under general combined modes including those under bi-axial tensile loads. Eng Fract Mech 18(6): 1131–115810.1016/0013-7944(83)90007-3 ↗
64. Walters MC, Dodds RH Jr, Paulino GH (2005) Interaction integral procedures for 3-D curved cracks including surface tractions. Eng Fract Mech 60: 577–581
65. Walters MC, Paulino GH, Dodds RH Jr (2004) Stress intensity factors for surface cracks in functionally graded materials under mode I thermomechanical loading. Int J Solids Struct 41: 1081–111810.1016/j.ijsolstr.2003.09.050 ↗
66. Walters MC, Paulino GH, Dodds RH Jr (2006) Computation of mixed-mode stress intensity factors for cracks in three-dimensional functionally graded solids. J Eng Mech 132(1): 1–1510.1061/(ASCE)0733-9399(2006)132:1(1) ↗
67. Wang Z, Nakamura T (2004) Simulations of crack propagation in elastic-plastic graded materials. Mech Mater 36: 601–62210.1016/S0167-6636(03)00079-6 ↗
68. Watanabe Y, Nakamura Y, Fukui Y, Nakanishi K (1993) A magnetic-functionally graded material manufactured with deformation-induced martensitic transformation. J Mater Sci Lett 12(5): 326–32810.1007/BF01910093 ↗
69. Watari F, Yokoyama A, Saso F, Uo M, Ohkawa S, Kawasaki T (1996) EPMA elemental mapping of functionally graded dental implant in biocompatibility test. In: Proceedings of the fourth international symposium on functionally gradient materials. Tsukuba City, Japan
70. Wawrzynek PA (1987) Interactive finite element analysis of fracture processes: an integrated approach. M.S. Thesis, Cornell University10.1016/0167-8442(87)90007-3 ↗
71. Wawrzynek PA, Ingraffea AR (1991) Discrete modeling of crack propagation: theoretical aspects and implementation issues in two and three dimensions. Report 91-5, School of Civil Engineering and Environmental Engineering, Cornell University
72. Williams JG, Ewing PD (1972) Fracture under complex stress—the angled crack problem. Int J Fract 8(4): 416–441
73. Williams ML (1957) On the stress distribution at the base of a stationary crack. J Appl Mech Trans ASME 24(1): 109–11410.1115/1.4011454 ↗
74. Yau JF, Wang SS, Corten HT (1980) A mixed-mode crack analysis of isotropic solids using conservation laws of elasticity. J Appl Mech Trans ASME 47(2): 335–34110.1115/1.3153665 ↗
75. Yildirim B (2006) An equivalent domain integral method for fracture analysis of functionally graded materials under thermal stresses. J Therm Stress 9: 371–39710.1080/01495730500499175 ↗
76. Yildirim B, Dag S, Erdogan F (2005) Three dimensional fracture analysis of FGM coatings under thermomechanical loading. Int J Fract 132: 369–39510.1007/s10704-005-2527-9 ↗
77. Zhang Z, Paulino GH (2005) Cohesive zone modeling of dynamic failure in homogeneous and functionally graded materials. Int J Plast 21: 1154–1195