Tension-softening constitutive relation and numerical simulation method for mode I fatigue crack propagation in concrete
Source abstract
Abstract
This paper presents the investigations of the tension-softening constitutive relation of concrete and the numerical method for mode I fatigue crack propagation in concrete. Firstly, the static loading, fatigue loading, and fatigue–static loading were carried out on 191 notched three-point bending (TPB) beams. With the experimental results, the tension-softening constitutive relation of concrete under fatigue loading was proposed from the view of energy conservation, where the equilibrium relation between the energy dissipated by crack propagation and the external work was established. Secondly, by combining the constitutive relation with the stress intensity factor (SIF)-based crack propagation criterion, the numerical method for mode I fatigue crack propagation in concrete was developed. Finally, the applicability of the numerical method was validated by comparing the numerically derived fatigue life, fatigue crack propagation length, crack mouth opening displacement (CMOD), and SIF with the experimental results. It is concluded that the numerical method proposed in this paper is significantly helpful in evaluating the fatigue performance of concrete structures.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Rock Mechanics and Modeling · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Brake NA, Chatti K (2012) Prediction of transient and steady-state flexural fatigue crack propagation in concrete using a cyclic R-curve. J Eng Mech 138:371–378. https://doi.org/10.1061/(ASCE)EM.1943-7889.000033810.1061/(ASCE)EM.1943-7889.0000338 ↗
2. Brake NA, Chatti K (2013) Prediction of size effect and non-linear crack growth in plain concrete under fatigue loading. Eng Fract Mech 109:169–185. https://doi.org/10.1016/j.engfracmech.2013.06.00410.1016/j.engfracmech.2013.06.004 ↗
3. Brake NA, Chatti K (2017) Equivalent crack, fracture size effect, and cohesive stress zone of plain concrete under quasi-static and variable high-cycle fatigue loading. J Mater Civ Eng 29:04016247. https://doi.org/10.1061/(ASCE)MT.1943-5533.000176610.1061/(ASCE)MT.1943-5533.0001766 ↗
4. Chen C, Cheng L (2014) Cohesive model-based approach for fatigue life prediction of reinforced-concrete structures strengthened with NSM FRP. J Compos Constr 18:04013042. https://doi.org/10.1061/(ASCE)CC.1943-5614.000044610.1061/(ASCE)CC.1943-5614.0000446 ↗
5. Dong W, Wu Z, Zhou X (2013) Calculating crack extension resistance of concrete based on a new crack propagation criterion. Constr Build Mater 38:879–889. https://doi.org/10.1016/j.conbuildmat.2012.09.03710.1016/j.conbuildmat.2012.09.037 ↗
6. Dong W, Wu Z, Zhou X (2016a) Fracture mechanisms of rock-concrete interface: experimental and numerical. J Eng Mech 142:04016040. https://doi.org/10.1061/(ASCE)EM.1943-7889.000109910.1061/(ASCE)EM.1943-7889.0001099 ↗
7. Dong W, Wu Z, Zhou X, Wang C (2016b) A comparative study on two stress intensity factor-based criteria for prediction of mode-I crack propagation in concrete. Eng Fract Mech 158:39–58. https://doi.org/10.1016/j.engfracmech.2016.02.05110.1016/j.engfracmech.2016.02.051 ↗
8. Dong W, Wu Z, Tang X, Zhou X (2018) A comparative study on stress intensity factor-based criteria for the prediction of mixed mode I-II crack propagation in concrete. Eng Fract Mech 197:217–235. https://doi.org/10.1016/j.engfracmech.2018.05.00910.1016/j.engfracmech.2018.05.009 ↗
9. González DC, Vicente MA, Ahmad S (2015) Effect of cyclic loading on the residual tensile strength of steel fiber-reinforced high-strength concrete. J Mater Civ Eng 27:04014241. https://doi.org/10.1061/(ASCE)MT.1943-5533.000120010.1061/(ASCE)MT.1943-5533.0001200 ↗
10. Gylltoft K (1983) Fracture mechanics models for fatigue in concrete structures. Dissertation, Division of Structural Engineering, Luleå University of Technology
11. Hillerborg A, Modéer M, Petersson P-E (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cem Concr Res 6:773–782. https://doi.org/10.1016/0008-8846(76)90007-710.1016/0008-8846(76)90007-7 ↗
12. Hordijk DA (1991) Local approach to fatigue of concrete. Dissertation, Delft University of Technology
13. Horii H, Shin HC, Pallewatta TM (1992) Mechanism of fatigue crack growth in concrete. Cem Concr Compos 14:83–89. https://doi.org/10.1016/0958-9465(92)90002-D10.1016/0958-9465(92)90002-D ↗
14. Hu X, Mai YM (1992) Crack-bridging analysis for alumina ceramics under monotonic and cyclic loading. J Am Ceram Soc 75:848–853. https://doi.org/10.1111/j.1151-2916.1992.tb04150.x10.1111/j.1151-2916.1992.tb04150.x ↗
15. Huang T, Zhang YX (2018) Numerical modelling on degradation of mechanical behaviour for engineered cementitious composites under fatigue tensile loading. Eng Fract Mech 188:309–319. https://doi.org/10.1016/j.engfracmech.2017.08.03610.1016/j.engfracmech.2017.08.036 ↗
16. Huang T, Zhang YX, Lo SR, Lee CK (2017) Experimental study on crack bridging in engineered cementitious composites under fatigue tensile loading. Constr Build Mater 154:167–175. https://doi.org/10.1016/j.conbuildmat.2017.07.19310.1016/j.conbuildmat.2017.07.193 ↗
17. Li VC, Matsumoto T (1998) Fatigue crack growth analysis of fiber reinforced concrete with effect of interfacial bond degradation. Cem Concr Compos 20:339–351. https://doi.org/10.1016/S0958-9465(98)00010-910.1016/S0958-9465(98)00010-9 ↗
18. Maitra SR, Reddy KS, Ramachandra LS (2014) Numerical investigation of fatigue characteristics of concrete pavement. Int J Fract 189:181–193. https://doi.org/10.1007/s10704-014-9969-x10.1007/s10704-014-9969-x ↗
19. Matsumoto T, Li VC (1999) Fatigue life analysis of fiber reinforced concrete with a fracture mechanics based model. Cem Concr Compos 21:249–261. https://doi.org/10.1016/S0958-9465(99)00004-910.1016/S0958-9465(99)00004-9 ↗
20. Niwa J, Sumranwanich T, Tangtermsirikul S (1998) New method to determine tension softening curve of concrete. In: Fracture mechanics of concrete structures: Proceedings, FRAMCOS-3, Freiburg, Germany10.2208/jscej.1998.606_75 ↗
21. Ortega JJ, Ruiz G, Yu RC, Afanador-García N, Tarifa M, Poveda E, Zhang X, Evangelista JF (2018) Number of tests and corresponding error in concrete fatigue. Int J Fatigue 116:210–219. https://doi.org/10.1016/j.ijfatigue.2018.06.02210.1016/j.ijfatigue.2018.06.022 ↗
22. Reinhardt HW, Cornelissen HAW, Hordijk DA (1986) Tensile tests and failure analysis of concrete. J Struct Eng 112:2462–2477. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:11(2462)10.1061/(ASCE)0733-9445(1986)112:11(2462) ↗
23. RILEM TC 50 (1985) RILEM TC 50-FMC recommendation: determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams. Mater Struct 18:287–290. https://doi.org/10.1007/BF0247291810.1007/BF02472918 ↗
24. Shi M, Zhong H, Ooi ET, Zhang C, Song C (2013) Modelling of crack propagation of gravity dams by scaled boundary polygons and cohesive crack model. Int J Fract 183:29–48. https://doi.org/10.1007/s10704-013-9873-910.1007/s10704-013-9873-9 ↗
25. Simon KM, Chandra Kishen JM (2016) Influence of aggregate bridging on the fatigue behavior of concrete. Int J Fatigue 90:200–209. https://doi.org/10.1016/j.ijfatigue.2016.05.00910.1016/j.ijfatigue.2016.05.009 ↗
26. Skar A, Poulsen PN, Olesen JF (2017) A simple model for fatigue crack growth in concrete applied to a hinge beam model. Eng Fract Mech 181:38–51. https://doi.org/10.1016/j.engfracmech.2017.06.01810.1016/j.engfracmech.2017.06.018 ↗
27. Slowik V, Plizzari GA, Saouma VE (1996) Fracture of concrete under variable amplitude fatigue loading. ACI Mater J 93:272–283. https://doi.org/10.14359/981210.14359/9812 ↗
28. Soroushian P, Elzafraney M (2004) Damage effects on concrete performance and microstructure. Cem Concr Compos 26:853–859. https://doi.org/10.1016/j.cemconcomp.2003.05.00110.1016/j.cemconcomp.2003.05.001 ↗
29. Toumi A, Bascoul A (2002) Mode I crack propagation in concrete under fatigue: microscopic observations and modelling. Int J Numer Anal Methods Geomech 26:1299–1312. https://doi.org/10.1002/nag.24510.1002/nag.245 ↗
30. Toumi A, Nguyen T-H, Turatsinze A (2014) Modelling of the debonding of steel fibre reinforced and rubberised cement-based overlays under fatigue loading. Eur J Environ Civ Eng 19:672–686. https://doi.org/10.1080/19648189.2014.96584810.1080/19648189.2014.965848 ↗
31. Toyama H, Kishida H, Yonezu A (2018) Characterization of fatigue crack growth of concrete mortar under cyclic indentation loading. Eng Fail Anal 83:156–166. https://doi.org/10.1016/j.engfailanal.2017.10.00410.1016/j.engfailanal.2017.10.004 ↗
32. Tran QT, Toumi A, Turatsinze A (2007a) Thin bonded cement-based overlays: numerical analysis of factors influencing their debonding under fatigue loading. Mater Struct 41:951–967. https://doi.org/10.1617/s11527-007-9297-y10.1617/s11527-007-9297-y ↗
33. Tran QT, Toumi A, Turatsinze A (2007b) Modelling of debonding between old concrete and overlay: fatigue loading and delayed effects. Mater Struct 40:1045–1059. https://doi.org/10.1617/s11527-006-9204-y10.1617/s11527-006-9204-y ↗
34. Wu Z, Rong H, Zheng J, Dong W (2013) Numerical method for mixed-mode I-II crack propagation in concrete. J Eng Mech 139:1530–1538. https://doi.org/10.1061/(ASCE)EM.1943-7889.000059410.1061/(ASCE)EM.1943-7889.0000594 ↗
35. Xu S, Reinhardt HW (1999a) Determination of double-K criterion for crack propagation in quasi-brittle fracture, Part II: analytical evaluating and practical measuring methods for three-point bending notched beams. Int J Fract 98:151–177. https://doi.org/10.1023/A:101874072845810.1023/A:1018740728458 ↗
36. Xu SL, Reinhardt HW (1999b) Determination of double-K criterion for crack propagation in quasi-brittle fracture, Part I: experimental investigation of crack propagation. Int J Fract 98:111–149. https://doi.org/10.1023/A:101866892998910.1023/A:1018668929989 ↗
37. Yang Z, Chen J (2004) Fully automatic modelling of cohesive discrete crack propagation in concrete beams using local arc-length methods. Int J Solids Struct 41:801–826. https://doi.org/10.1016/j.ijsolstr.2003.09.03310.1016/j.ijsolstr.2003.09.033 ↗
38. Yankelevsky DZ, Reinhardt HW (1989) Uniaxial behavior of concrete in cyclic tension. J Struct Eng 115:166–182. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:1(166)10.1061/(ASCE)0733-9445(1989)115:1(166) ↗
39. Zhang B, Wu K (1997) Residual fatigue strength and stiffness of ordinary concrete under bending. Cem Concr Res 27:115–126. https://doi.org/10.1016/S0008-8846(96)00183-410.1016/S0008-8846(96)00183-4 ↗
40. Zhang J, Stang H, Li VC (1999) Fatigue life prediction of fiber reinforced concrete under flexural load. Int J Fatigue 21:1033–1049. https://doi.org/10.1016/S0142-1123(99)00093-610.1016/S0142-1123(99)00093-6 ↗
41. Zhang J, Stang H, Li VC (2000) Experimental study on crack bridging in FRC under uniaxial fatigue tension. J Mater Civ Eng 12:66–73. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:1(66)10.1061/(ASCE)0899-1561(2000)12:1(66) ↗
42. Zhang J, Li VC, Stang H (2001) Size effect on fatigue in bending of concrete. J Mater Civ Eng 13:446–453. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:6(446)10.1061/(ASCE)0899-1561(2001)13:6(446) ↗
43. Zhang D, Furuuchi H, Hori A, Seiji F, Ueda T (2009a) Determination of tensile crack bridging of PCM–concrete interface subjected to fatigue loading by means of bending test. J Struct Eng 55A:861–870. https://doi.org/10.11532/structcivil.55A.86110.11532/structcivil.55A.861 ↗
44. Zhang D, Furuuchi H, Hori A, Ueda T (2009b) Fatigue degradation properties of PCM–concrete interface. J Adv Concr Technol 7:425–438. https://doi.org/10.3151/jact.7.42510.3151/jact.7.425 ↗
45. Zhang P, Ren Q, Lei D (2018) Hysteretic model for concrete under cyclic tension and tension–compression reversals. Eng Struct 163:388–395. https://doi.org/10.1016/j.engstruct.2018.02.05110.1016/j.engstruct.2018.02.051 ↗