Microstructural damage evolution and arrest in binary Fe–high-Mn alloys with different deformation temperatures

1. Curtze S, Kuokkala VT, Oikari A, Talonen J, Hänninen H (2011) Thermodynamic modeling of the stacking fault energy of austenitic steels. Acta Mater 59:1068–1076. https://doi.org/10.1016/j.actamat.2010.10.03710.1016/j.actamat.2010.10.037 ↗

2. De Cooman BC, Estrin Y, Kim SK (2018) Twinning-induced plasticity (TWIP) steels. Acta Mater 142:283–362. https://doi.org/10.1016/j.actamat.2017.06.04610.1016/j.actamat.2017.06.046 ↗

3. Dumay A, Chateau JP, Allain S, Migot S, Bouaziz O (2008) Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel. Mater Sci Eng A 483:184–187. https://doi.org/10.1016/j.msea.2006.12.17010.1016/j.msea.2006.12.170 ↗

4. Fernandino DO, Cisilino AP, Toro S, Sanchez PJ (2017) Multi-scale analysis of the early damage mechanics of ferritized ductile iron. Int J Fract 207:1–26. https://doi.org/10.1007/s10704-017-0215-110.1007/s10704-017-0215-1 ↗

5. Grässel O, Krüger L, Frommeyer G, Meyer LW (2000) High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development—properties—application. Int J Plast 16:1391–1409. https://doi.org/10.1016/S0749-6419(00)00015-210.1016/S0749-6419(00)00015-2 ↗

6. Hamada AS, Karjalainen LP, Puustinen J (2009) Fatigue behavior of high-Mn TWIP steels. Mater Sci Eng A 517:68–77. https://doi.org/10.1016/j.msea.2009.03.03910.1016/j.msea.2009.03.039 ↗

7. Hild F, Bouterf A, Roux S (2015) Damage measurements via DIC. Int J Fract 191:77–105. https://doi.org/10.1007/s10704-015-0004-710.1007/s10704-015-0004-7 ↗

8. Ju Y-B, Koyama M, Sawaguchi T, Tsuzaki K, Noguchi H (2016) In situ microscopic observations of low-cycle fatigue-crack propagation in high-Mn austenitic alloys with deformation-induced $$\varepsilon $$ ε -martensitic transformation. Acta Mater 112:326–336. https://doi.org/10.1016/j.actamat.2016.04.04210.1016/j.actamat.2016.04.042 ↗

9. Kaneko T, Koyama M, Fujisawa T, Tsuzaki K (2016) Combined multi-scale analyses on strain/damage/microstructure in steel: example of damage evolution associated with $$\varepsilon $$ ε -martensitic transformation. ISIJ Int 56:2037–2046. https://doi.org/10.2355/isijinternational.ISIJINT-2016-27210.2355/isijinternational.ISIJINT-2016-272 ↗

10. Koyama M, Akiyama E, Lee Y-K, Raabe D, Tsuzaki K (2017) Overview of hydrogen embrittlement in high-Mn steels. Int J Hydrog Energy 42:12706–12723. https://doi.org/10.1016/j.ijhydene.2017.02.21410.1016/j.ijhydene.2017.02.214 ↗

11. Koyama M, Akiyama E, Sawaguchi T, Raabe D, Tsuzaki K (2012) Hydrogen-induced cracking at grain and twin boundaries in an Fe–Mn–C austenitic steel. Scr Mater 66:459–462. https://doi.org/10.1016/j.scriptamat.2011.12.01510.1016/j.scriptamat.2011.12.015 ↗

12. Koyama M, Akiyama E, Tsuzaki K, Raabe D (2013) Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging. Acta Mater 61:4607–4618. https://doi.org/10.1016/j.actamat.2013.04.03010.1016/j.actamat.2013.04.030 ↗

13. Koyama M, Lee T, Lee CS, Tsuzaki K (2013) Grain refinement effect on cryogenic tensile ductility in a Fe–Mn–C twinning-induced plasticity steel. Mater Des 49:234–241. https://doi.org/10.1016/j.matdes.2013.01.06110.1016/j.matdes.2013.01.061 ↗

14. Koyama M, Murakami M, Ogawa K, Kikuchi T, Sawaguchi T (2007) Influence of Al on shape memory effect and twinning induced plasticity of Fe–Mn–Si–Al system alloy. Mater Trans 48:2729–273410.2320/matertrans.MRA2007124 ↗

15. Koyama M, Okazaki S, Sawaguchi T, Tsuzaki K (2016) Hydrogen embrittlement susceptibility of Fe–Mn binary alloys with high Mn content: effects of stable and metastable $$\varepsilon $$ ε -martensite, and Mn concentration. Metall Mater Trans A 47:2656–2673. https://doi.org/10.1007/s11661-016-3431-910.1007/s11661-016-3431-9 ↗

16. Koyama M, Sawaguchi T, Lee T, Lee CS, Tsuzaki K (2011) Work hardening associated with $$\varepsilon $$ ε -martensitic transformation, deformation twinning and dynamic strain aging in Fe–17Mn–0.6 C and Fe–17Mn–0.8 C TWIP steels. Mater Sci Eng A 528:7310–7316. https://doi.org/10.1016/j.msea.2011.06.01110.1016/j.msea.2011.06.011 ↗

17. Koyama M, Sawaguchi T, Tsuzaki K (2012a) Premature fracture mechanism in an Fe–Mn–C austenitic steel. Metall Mater Trans A 43:4063–4074. https://doi.org/10.1007/s11661-012-1220-710.1007/s11661-012-1220-7 ↗

18. Koyama M, Sawaguchi T, Tsuzaki K (2012b) Quasi-cleavage fracture along annealing twin boundaries in a Fe–Mn–C austenitic steel. ISIJ Int 52:161–163. https://doi.org/10.2355/isijinternational.52.16110.2355/isijinternational.52.161 ↗

19. Koyama M, Sawaguchi T, Tsuzaki K (2013) TWIP effect and plastic instability condition in an Fe–Mn–C austenitic steel. ISIJ Int 53:323–329. https://doi.org/10.2355/isijinternational.53.32310.2355/isijinternational.53.323 ↗

20. Koyama M, Tasan CC, Akiyama E, Tsuzaki K, Raabe D (2014) Hydrogen-assisted decohesion and localized plasticity in dual-phase steel. Acta Mater 70:174–187. https://doi.org/10.1016/j.actamat.2014.01.04810.1016/j.actamat.2014.01.048 ↗

21. Lee Y-K, Choi C (2000) Driving force for $$\gamma \rightarrow \varepsilon $$ γ → ε martensitic transformation and stacking fault energy of $$\gamma $$ γ in Fe–Mn binary system. Metall Mater Trans A 31:355–360. https://doi.org/10.1007/s11661-000-0271-310.1007/s11661-000-0271-3 ↗

22. Li H, Koyama M, Sawaguchi T, Tsuzaki K, Noguchi H (2015) Importance of crack-propagation-induced $$\varepsilon $$ ε -martensite in strain-controlled low-cycle fatigue of high-Mn austenitic steel. Philos Mag Lett 95:1–9 Please check and confirm the volume number is identified for the reference Li et al. (2015)

23. Li Z, Pradeep KG, Deng Y, Raabe D, Tasan CC (2016) Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off. Nature 534:227–230. https://doi.org/10.1038/nature1798110.1038/nature17981 ↗

24. Müllner P, Solenthaler C, Speidel MO (1994) Second order twinning in austenitic steel. Acta Metall et Mater 42:1727–1732. https://doi.org/10.1016/0956-7151(94)90382-410.1016/0956-7151(94)90382-4 ↗

25. Müllner P, Solenthaler C, Uggowitzer PJ, Speidel MO (1994) Brittle fracture in austenitic steel. Acta Metall et Mater 42:2211–2217. https://doi.org/10.1016/0956-7151(94)90300-X10.1016/0956-7151(94)90300-X ↗

26. Rémy L (1981) The interaction between slip and twinning systems and the influence of twinning on the mechanical behavior of fcc metals and alloys. Metall Trans A 12:387–408. https://doi.org/10.1007/bf0264853610.1007/bf02648536 ↗

27. Saeed-Akbari A, Imlau J, Prahl U, Bleck W (2009) Derivation and variation in composition-dependent stacking fault energy maps based on subregular solution model in high-manganese steels. Metall Mater Trans A 40:3076–3090. https://doi.org/10.1007/s11661-009-0050-810.1007/s11661-009-0050-8 ↗

28. Sasaki T, Watanabe K, Nohara K, Ono Y, Kondo N, Sato S (1982) Physical and mechanical properties of high manganese non-magnetic steel and its application to various products for commercial use. Trans Iron Steel Inst Jap 22:1010–1020. https://doi.org/10.2355/isijinternational1966.22.101010.2355/isijinternational1966.22.1010 ↗

29. Sato A, Chishima E, Soma K, Mori T (1982) Shape memory effect in $$\gamma \rightleftarrows \epsilon $$ γ ⇄ ϵ transformation in Fe–30Mn–1Si alloy single crystals. Acta Metall 30:1177–1183. https://doi.org/10.1016/0001-6160(82)90011-610.1016/0001-6160(82)90011-6 ↗

30. Sato A, Kubo H, Maruyama T (2006) Mechanical properties of Fe–Mn–Si based SMA and the application. Mater Trans 47:571–579. https://doi.org/10.2320/matertrans.47.57110.2320/matertrans.47.571 ↗

31. Sawaguchi T, Maruyama T, Otsuka H, Kushibe A, Inoue Y, Tsuzaki K (2016) Design concept and applications of Fe–Mn–Si-based alloys—from shape-memory to seismic response control. Mater Trans 57:283–293. https://doi.org/10.2320/matertrans.MB20151010.2320/matertrans.MB201510 ↗

32. Sawaguchi T (2015) Designing Fe–Mn–Si alloys with improved low-cycle fatigue lives. Scr Mater 99:49–52. https://doi.org/10.1016/j.scriptamat.2014.11.02410.1016/j.scriptamat.2014.11.024 ↗

33. So KH, Kim JS, Chun YS, Park K-T, Lee Y-K, Lee CS (2009) Hydrogen delayed fracture properties and internal hydrogen behavior of a Fe–18Mn–1.5Al–0.6C TWIP steel. ISIJ Int 49:1952–1959. https://doi.org/10.2355/isijinternational.49.195210.2355/isijinternational.49.1952 ↗

34. Steinmetz DR et al (2013) Revealing the strain-hardening behavior of twinning-induced plasticity steels: theory, simulations, experiments. Acta Mater 61:494–510. https://doi.org/10.1016/j.actamat.2012.09.06410.1016/j.actamat.2012.09.064 ↗

35. Takaki S, Furuya T, Tokunaga Y (1990) Effect of Si and Al additions on the low temperature toughness and fracture mode of Fe–27Mn alloys. ISIJ Int 30:632–638. https://doi.org/10.2355/isijinternational.30.63210.2355/isijinternational.30.632 ↗

36. Tasan CC, Hoefnagels JPM, Geers MGD (2012) Identification of the continuum damage parameter: an experimental challenge in modeling damage evolution. Acta Mater 60:3581–3589. https://doi.org/10.1016/j.actamat.2012.03.01710.1016/j.actamat.2012.03.017 ↗

37. Tsuzaki K, Fukuda K, Koyama M, Matsunaga H (2016) Hexagonal close-packed Martensite-related fatigue crack growth under the influence of hydrogen: example of Fe–15Mn–10Cr–8Ni–4Si austenitic alloy. Scr Mater 113:6–9. https://doi.org/10.1016/j.scriptamat.2015.10.01610.1016/j.scriptamat.2015.10.016 ↗

38. Uehata N, Koyama M, Takagi S, Tsuzaki K (2018) Optical microscopy-based damage quantification: an example of cryogenic deformation of a dual-phase steel. ISIJ Int 58:179–185 Please check and confirm the inserted volume number and page range for the reference Uehata et al. (2018)10.2355/isijinternational.ISIJINT-2017-468 ↗

39. Wen YH, Peng HB, Raabe D, Gutierrez-Urrutia I, Chen J, Du YY (2014) Large recovery strain in Fe–Mn–Si-based shape memory steels obtained by engineering annealing twin boundaries Nature. Communications 5:4964. https://doi.org/10.1038/ncomms596410.1038/ncomms5964 ↗

40. Yang CL, Zhang ZJ, Zhang P, Zhang ZF (2017) The premature necking of twinning-induced plasticity steels. Acta Mater 136:1–10. https://doi.org/10.1016/j.actamat.2017.06.04210.1016/j.actamat.2017.06.042 ↗

41. Yu H-Y (2017) Post-uniform elongation and tensile fracture mechanisms of Fe–18Mn–0.6C–xAl twinning-induced plasticity steels. Acta Mater 131:435–444. https://doi.org/10.1016/j.actamat.2017.04.01110.1016/j.actamat.2017.04.011 ↗

42. Zhang X, Sawaguchi T (2018) Twinning of deformation-induced $$\varepsilon $$ ε -martensite in Fe–30Mn–6Si shape memory alloy. Acta Mater 143:237–247. https://doi.org/10.1016/j.actamat.2017.10.00910.1016/j.actamat.2017.10.009 ↗

43. Zhang X, Sawaguchi T, Ogawa K, Yin F, Zhao X (2011) Orientation dependence of variant selection and intersection reactions of $$\epsilon $$ ϵ martensite in a high-manganese austenitic steel. Philos Mag Lett 91:563–571. https://doi.org/10.1080/09500839.2011.59649210.1080/09500839.2011.596492 ↗

44. Zhang X, Sawaguchi T, Ogawa K, Yin F, Zhao X (2011) A structure created by intersecting $$\epsilon $$ ϵ martensite variant plates in a high-manganese steel. Philos Mag 91:4410–4426. https://doi.org/10.1080/14786435.2011.60873410.1080/14786435.2011.608734 ↗