Evaluation and analysis of cutting speed, wire wear ratio, and dimensional deviation of wire electric discharge machining of super alloy Udimet-L605 using support vector machine and grey relational analysis
Source abstract
Abstract
The current study investigates the behavior of wire electric discharge machining (WEDM) of the super alloy Udimet-L605 by employing sophisticated machine learning approaches. The experimental work was designed on the basis of the Taguchi orthogonal L27 array, considering six explanatory variables and evaluating their influences on the cutting speed, wire wear ratio (WWR), and dimensional deviation (DD). A support vector machine (SVM) algorithm using a normalized poly-kernel and a radial-basis flow kernel is recommended for modeling the wire electric discharge machining process. The grey relational analysis (GRA) approach was utilized to obtain the optimal combination of process variables simultaneously, providing the desirable outcome for the cutting speed, WWR, and DD. Scanning electron microscope and energy dispersive X-ray analyses of the samples were performed for the confirmation of the results. An SVM based on the radial-basis kernel model dominated the normalized poly-kernel model. The optimal combination of process variables for a mutually desirable outcome for the cutting speed, WWR, and DD was determined as T on1, T off2, I P1, WT3, SV1, and WF3. The pulse-on time is the significant variable influencing the cutting speed, WWR, and DD. The largest percentage of copper (8.66%) was observed at the highest cutting speed setting of the machine compared to 7.05% of copper at the low cutting speed setting of the machine.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Wolf JS, Sandrock GD (1968) Some observations concerning the oxidation of the cobalt-base superalloy L-605 (HS-25). NASA TN D-4715, 1-37, Id. 20020916024
2. Hebsur MG, Noebe RD, Revilock DM (2003) Superior ballistic impact resistance achieved by the co-base alloy Haynes 25 (L605). Research and Technology, NASA/TM-211990
3. Tosun N, Cogun C (2003) An investigation on wire wears in WEDM. J Mater Process Technol 134(3):273–27810.1016/S0924-0136(02)01045-2 ↗
4. Puri AB, Bhattacharyya B (2003) An analysis and optimization of the geometrical inaccuracy due to wire lag phenomenon in WEDM. Int J Mach Tools Manuf 43(2):151–15910.1016/S0890-6955(02)00158-X ↗
5. Sarkar S, Mitra S, Bhattacharyya B (2006) Parametric optimization of wire electrical discharge machining of γ titanium aluminide alloy through an artificial neural network model. Int J Adv Manuf Technol 27(5–6):501–50810.1007/s00170-004-2203-7 ↗
6. Ramakrishnan R, Karunamoorthy L (2006) Multi response optimization of wire EDM operations using robust design of experiments. Int J Adv Manuf Technol 29(1–2):105–11210.1007/s00170-004-2496-6 ↗
7. Mahapatra SS, Patnaik A (2007) Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method. Int J Adv Manuf Technol 34(9–10):911–92510.1007/s00170-006-0672-6 ↗
8. Gauri SK, Chakraborty S (2009) Optimisation of multiple responses for WEDM processes using weighted principal components. Int J Adv Manuf Technol 40(11–12):1102–111010.1007/s00170-008-1429-1 ↗
9. Kumar S, Singh R (2010) Investigating surface properties of OHNS die steel after electrical discharge machining with manganese powder mixed in the dielectric. Int J Adv Manuf Technol 50(5–8):625–63310.1007/s00170-010-2536-3 ↗
10. Kumar K, Agarwal S (2012) Multi-objective parametric optimization on machining with wire electric discharge machining. Int J Adv Manuf Technol 62(5–8):617–63310.1007/s00170-011-3833-1 ↗
11. Azhiri RB, Teimouri R, Baboly MG et al (2014) Application of Taguchi, ANFIS and grey relational analysis for studying, modeling and optimization of wire EDM process while using gaseous media. Int J Adv Manuf Technol 71(1–4):279–29510.1007/s00170-013-5467-y ↗
12. Rao TB, Krishna AG (2013) Simultaneous optimization of multiple performance characteristics in WEDM for machining ZC63/SiCp MMC. Adv Manuf 1(3):265–27510.1007/s40436-013-0029-y ↗
13. Kosaraju S, Anne VG (2013) Optimal machining conditions for turning Ti-6Al-4V using response surface methodology. Adv Manuf 1(4):329–33910.1007/s40436-013-0047-9 ↗
14. Das AK, Saha P (2013) Machining of circular micro holes by electrochemical micro-machining process. Adv Manuf 1(4):314–31910.1007/s40436-013-0042-1 ↗
15. Khan ZA, Siddiquee AN, Khan NZ et al (2014) Multi response optimization of wire electrical discharge machining process parameters using Taguchi based grey relational analysis. Procedia Mater Sci 6:1683–169510.1016/j.mspro.2014.07.154 ↗
16. Prasad DVSSSV, Krishna AG (2015) Empirical modeling and optimization of kerf and wire wear ratio in wire electrical discharge machining. Int J Adv Manuf Technol 77(1–4):427–44110.1007/s00170-014-6445-8 ↗
17. Tripathy S, Tripathy DK (2016) Multi-attribute optimization of machining process parameters in powder mixed electro-discharge machining using TOPSIS and grey relational analysis. Int J Eng Sci Technol 19(1):62–7010.1016/j.jestch.2015.07.010 ↗
18. Nain SS, Garg D, Kumar S (2017) Modeling and optimization of process variables of wire-cut electric discharge machining of super alloy Udimet-L605. Eng Sci Technol Int J 20:247–26410.1016/j.jestch.2016.09.023 ↗
19. Liu H, Wang X, Tan D et al (2006) Study on traffic information fusion algorithm based on support vector machines. In: Proceeding of the sixth international conference on intelligent systems design and applications, IEEE, vol 6, pp 183–18710.1109/ISDA.2006.259 ↗
20. Pal M, Singh NK, Tiwari NK (2010) Support vector regression based modelling of pier scour using field data. Eng Appl Artif Intell 24(5):911–91610.1016/j.engappai.2010.11.002 ↗
21. Lu WC, Ji XB, Li MJ et al (2013) Using support vector machine for materials design. Adv Manuf 1(2):151–15910.1007/s40436-013-0025-2 ↗
22. Laha D, Ren Y, Suganthan PN (2015) Modeling of steel making process with effective machine learning techniques. Expert Syst Appl 42:4687–469610.1016/j.eswa.2015.01.030 ↗
23. Zhang L, Jia Z, Wang F et al (2010) A hybrid model using supporting vector machine and multi-objective genetic algorithm for processing parameters optimization in micro-EDM. Int J Adv Manuf Technol 51:575–58610.1007/s00170-010-2623-5 ↗
24. Vapnik VN (1998) Statistical learning theory. Wiley, New York
25. Vapnik VN (1995) The nature of statistical learning theory. Springer, New York10.1007/978-1-4757-2440-0 ↗
26. Smola AJ (1996) Regression estimation with support vector learning machines. Dissertation, Technical University of Munich
27. Cortes C, Vapnik VN (1995) Support vector networks. Mach Learn 20(3):273–297
28. Luenberger DG (1984) Linear and nonlinear programming. Addison-Wesley, New Jersey
29. Witten IH, Frank E (2005) Data mining: practical machine learning tools and techniques. Morgan Kaufmann, San Francisco, p 2
30. Roy RK (1990) A primer on Taguchi method. Van Nostrand Reinhold, New York
31. Ross PJ (1996) Taguchi techniques for quality engineering. McGraw Hill, New York
32. Deng J (1989) Introduction to grey system. J Grey Syst 1:1–24
33. Deng J (1982) Control problems of grey systems. Syst Control Lett 5:288–294