Precision micro-milling process: state of the art
Source abstract
Abstract
Abstract Micro-milling is a precision manufacturing process with broad applications across the biomedical, electronics, aerospace, and aeronautical industries owing to its versatility, capability, economy, and efficiency in a wide range of materials. In particular, the micro-milling process is highly suitable for very precise and accurate machining of mold prototypes with high aspect ratios in the microdomain, as well as for rapid micro-texturing and micro-patterning, which will have great importance in the near future in bio-implant manufacturing. This is particularly true for machining of typical difficult-to-machine materials commonly found in both the mold and orthopedic implant industries. However, inherent physical process constraints of machining arise as macro-milling is scaled down to the microdomain. This leads to some physical phenomena during micro-milling such as chip formation, size effect, and process instabilities. These dynamic physical process phenomena are introduced and discussed in detail. It is important to remember that these phenomena have multifactor effects during micro-milling, which must be taken into consideration to maximize the performance of the process. The most recent research on the micro-milling process inputs is discussed in detail from a process output perspective to determine how the process as a whole can be improved. Additionally, newly developed processes that combine conventional micro-milling with other technologies, which have great prospects in reducing the issues related to the physical process phenomena, are also introduced. Finally, the major applications of this versatile precision machining process are discussed with important insights into how the application range may be further broadened.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Chavoshi SZ, Goel S, Morantz P (2017) Current trends and future of sequential micro-machining processes on a single machine tool. Mater Des 127:37–5310.1016/j.matdes.2017.04.057 ↗
2. Huang Y, Wang L, Liang SY (2019) Handbook of manufacturing. World Scientific Publishing Company Pte Limited, Singapore10.1142/11006 ↗
3. Chern GL, Wu YJE, Cheng JC et al (2007) Study on burr formation in micro-machining using micro-tools fabricated by micro-EDM. Precis Eng 31(2):122–12910.1016/j.precisioneng.2006.04.001 ↗
4. Câmara MA, Rubio JCC, Abrão AM et al (2012) State of the art on micro-milling of materials, a review. J Mater Sci Technol 28(8):673–68510.1016/S1005-0302(12)60115-7 ↗
5. Uriarte L, Eguía J, Egaña F (2009) Micro-milling machines. In: López de Lacalle LN, Lamikiz A (eds) Machine tools for high performance machining. Springer, London, pp 369–39710.1007/978-1-84800-380-4_11 ↗
6. Shokrani A, Dhokia V, Newman ST (2012) Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids. Int J Mach Tools Manuf 57:83–10110.1016/j.ijmachtools.2012.02.002 ↗
7. Wan M, Ma YC, Feng J et al (2016) Study of static and dynamic ploughing mechanisms by establishing generalized model with static milling forces. Int J Mech Sci 114:120–13110.1016/j.ijmecsci.2016.05.010 ↗
8. Ahmadi K, Altintas Y (2014) Identification of machining process damping using output-only modal analysis. J Manuf Sci Eng 136(5):051017. https://doi.org/10.1115/1.402767610.1115/1.4027676 ↗
9. Kim CJ, Mayor JR, Ni J (2004) A static model of chip formation in microscale milling. J Manuf Sci Eng 126(4):710–71810.1115/1.1813475 ↗
10. Li HZ, Liu K, Li XP (2001) A new method for determining the undeformed chip thickness in milling. J Mater Process Technol 113(1/3):378–384
11. Chen N, Chen M, Wu C et al (2017) Research in minimum undeformed chip thickness and size effect in micro end-milling of potassium dihydrogen phosphate crystal. Int J Mech Sci 134:387–39810.1016/j.ijmecsci.2017.10.025 ↗
12. Liu X, DeVor RE, Kapoor SG (2006) An analytical model for the prediction of minimum chip thickness in micromachining. J Manuf Sci Eng 128(2):474–48110.1115/1.2162905 ↗
13. Niu Z, Jiao F, Cheng K (2018) An innovative investigation on chip formation mechanisms in micro-milling using natural diamond and tungsten carbide tools. J Manuf Process 31:382–39410.1016/j.jmapro.2017.11.023 ↗
14. Fang F, Xu F (2018) Recent advances in micro/nano-cutting: effect of tool edge and material properties. Nanomanuf Metrol 1(1):4–3110.1007/s41871-018-0005-z ↗
15. Li G, Qu D, Feng WW et al (2016) Modeling and experimental study on the force of micro-milling titanium alloy based on tool runout. Int J Adv Manuf Technol 87(1/4):1193–120210.1007/s00170-016-8473-z ↗
16. Lai X, Li H, Li C et al (2008) Modelling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness. Int J Mach Tools Manuf 48(1):1–1410.1016/j.ijmachtools.2007.08.011 ↗
17. Komatsu T, Yoshino T, Matsumura T et al (2012) Effect of crystal grain size in stainless steel on cutting process in micro-milling. Procedia CIRP 1:150–15510.1016/j.procir.2012.04.026 ↗
18. Uriarte L, Azcárate S, Herrero A et al (2008) Mechanistic modelling of the micro end milling operation. Proc Inst Mech Eng Part B J Eng Manuf 222(1):23–3310.1243/09544054JEM837 ↗
19. Arizmendi M, Campa FJ, Fernández J et al (2009) Model for surface topography prediction in peripheral milling considering tool vibration. CIRP Ann 58(1):93–9610.1016/j.cirp.2009.03.084 ↗
20. Son SM, Lim HS, Ahn JH (2005) Effects of the friction coefficient on the minimum cutting thickness in micro cutting. Int J Mach Tools Manuf 45(4/5):529–53510.1016/j.ijmachtools.2004.09.001 ↗
21. Malekian M, Mostofa MG, Park SS et al (2012) Modeling of minimum uncut chip thickness in micro machining of aluminum. J Mater Process Technol 212(3):553–55910.1016/j.jmatprotec.2011.05.022 ↗
22. Ramos AC, Autenrieth H, Strauß T et al (2012) Characterization of the transition from ploughing to cutting in micro machining and evaluation of the minimum thickness of cut. J Mater Process Technol 212(3):594–60010.1016/j.jmatprotec.2011.07.007 ↗
23. Fang FZ, Lee LC, Liu XD (2005) Mean flank temperature measurement in high speed dry cutting of magnesium alloy. J Mater Process Technol 167(1):119–12310.1016/j.jmatprotec.2004.10.002 ↗
24. Lu X, Jia Z, Wang F et al (2018) Model of the instantaneous undeformed chip thickness in micro-milling based on tooth trajectory. Proc Inst Mech Eng Part B J Eng Manuf 232(2):226–23910.1177/0954405416639890 ↗
25. Arif M, Zhang XQ, Rahman M et al (2013) A predictive model of the critical undeformed chip thickness for ductile-brittle transition in nano-machining of brittle materials. Int J Mach Tools Manuf 64:114–12210.1016/j.ijmachtools.2012.08.005 ↗
26. Fang FZ, Liu XD, Lee LC (2003) Micro-machining of optical glasses—a review of diamond-cutting glasses. Sadhana 28(5):945–95510.1007/BF02703324 ↗
27. Yang M, Li C, Zhang Y et al (2017) Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions. Int J Mach Tools Manuf 122:55–6510.1016/j.ijmachtools.2017.06.003 ↗
28. Rodrigues AR, Jasinevicius RG (2017) Machining scale. Microfabrication and precision engineering. Elsevier, Amsterdam, pp 27–6810.1016/B978-0-85709-485-8.00002-4 ↗
29. Pálmai Z, Csernák G (2013) Effects of built-up edge-induced oscillations on chip formation during turning. J Sound Vib 332(8):2057–206910.1016/j.jsv.2012.08.015 ↗
30. Nakayama K (1966) Relationship between cutting forces, temperatures, built-up edge and surface finish. Ann CIRP 14:211–223
31. Childs THC (2011) Towards simulating built-up-edge formation in the machining of steel. CIRP J Manuf Sci Technol 4(1):57–7010.1016/j.cirpj.2011.07.002 ↗
32. Ozcatalbas Y (2003) Chip and built-up edge formation in the machining of in situ Al4C3-Al composite. Mater Des 24(3):215–22110.1016/S0261-3069(02)00146-2 ↗
33. Thepsonthi T, Özel T (2015) 3-D finite element process simulation of micro-end milling Ti-6Al-4V titanium alloy: Experimental validations on chip flow and tool wear. J Mater Process Technol 221:128–14510.1016/j.jmatprotec.2015.02.019 ↗
34. Wang Z, Kovvuri V, Araujo A et al (2016) Built-up-edge effects on surface deterioration in micro-milling processes. J Manuf Process 24:321–32710.1016/j.jmapro.2016.03.016 ↗
35. Davoudinejad A, Tosello G, Annoni M (2017) Influence of the worn tool affected by built-up edge (BUE) on micro end-milling process performance: a 3D finite element modeling investigation. Int J Precis Eng Manuf 18(10):1321–133210.1007/s12541-017-0157-6 ↗
36. Ucun İ, Aslantas K, Bedir F (2015) The performance of DLC-coated and uncoated ultra-fine carbide tools in micro-milling of Inconel 718. Precis Eng 41:135–14410.1016/j.precisioneng.2015.01.002 ↗
37. Aslantas K, Hopa HE, Percin M et al (2016) Cutting performance of nano-crystalline diamond (NCD) coating in micro-milling of Ti6Al4V alloy. Precis Eng 45:55–6610.1016/j.precisioneng.2016.01.009 ↗
38. Oliaei SNB, Karpat Y (2017) Built-up edge effects on process outputs of titanium alloy micro milling. Precis Eng 49:305–31510.1016/j.precisioneng.2017.02.019 ↗
39. Ahmadi M, Karpat Y, Acar O et al (2018) Microstructure effects on process outputs in micro scale milling of heat treated Ti6Al4V titanium alloys. J Mater Process Technol 252:333–34710.1016/j.jmatprotec.2017.09.042 ↗
40. Özel T, Olleak A, Thepsonthi T (2017) Micro milling of titanium alloy Ti-6Al-4V: 3-D finite element modeling for prediction of chip flow and burr formation. Prod Eng 11(4/5):435–44410.1007/s11740-017-0761-4 ↗
41. Lee K, Dornfeld DA (2002) An experimental study on burr formation in micro-milling aluminium and copper. Dearborn, Mich. Society of Manufacturing Engineers, pp 1–8
42. Aurich JC, Dornfeld D, Arrazola PJ et al (2009) Burrs—analysis, control and removal. CIRP Ann 58(2):519–54210.1016/j.cirp.2009.09.004 ↗
43. Niknam SA, Davoodi B, Davim JP et al (2018) Mechanical deburring and edge-finishing processes for aluminum parts—a review. Int J Adv Manuf Technol 95(1/4):1101–112510.1007/s00170-017-1288-8 ↗
44. Fang FZ, Xiong Z, Hu XT (2006) An experimental study of micromachining step-mirrors for laser-diode beam shaping. J Micromech Microeng 16(2):214–21810.1088/0960-1317/16/2/004 ↗
45. Fang FZ, Liu YC (2004) On minimum exit-burr in micro cutting. J Micromech Microeng 14(7):984–98810.1088/0960-1317/14/7/020 ↗
46. Jin CZ, Kang IS, Park JH et al (2009) The characteristics of cutting forces in the micro-milling of AISI D2 steel. J Mech Sci Technol 23(10):2823–282910.1007/s12206-009-0804-7 ↗
47. Saptaji K, Subbiah S, Dhupia JS (2012) Effect of side edge angle and effective rake angle on top burrs in micro-milling. Precis Eng 36(3):444–45010.1016/j.precisioneng.2012.01.008 ↗
48. Chern GL (2006) Experimental observation and analysis of burr formation mechanisms in face milling of aluminum alloys. Int J Mach Tools Manuf 46(12/13):1517–152510.1016/j.ijmachtools.2005.09.006 ↗
49. Hashimura M, Hassamontr J, Dornfeld DA (1999) Effect of in-plane exit angle and rake angles on burr height and thickness in face milling operation. J Manuf Sci Eng 121(1):13–1910.1115/1.2830566 ↗
50. Litwinski KM, Min S, Lee DE, Dornfeld DA, Lee N (2006) Scalability of tool path planning to micro machining. In: 1st international conference on micromanufacturing ICOMM, U. of Illinois, Urbana-Champaign, September, Paper No. 28
51. Kiswanto G, Zariatin DL, Ko TJ (2014) The effect of spindle speed, feed-rate and machining time to the surface roughness and burr formation of aluminum alloy 1100 in micro-milling operation. J Manuf Process 16(4):435–45010.1016/j.jmapro.2014.05.003 ↗
52. Medeossi F, Sorgato M, Bruschi S et al (2018) Novel method for burrs quantitative evaluation in micro-milling. Precis Eng 54:379–38710.1016/j.precisioneng.2018.07.007 ↗
53. Chen W, Teng X, Zheng L et al (2018) Burr reduction mechanism in vibration-assisted micro milling. Manuf Lett 16:6–910.1016/j.mfglet.2018.02.015 ↗
54. Li G, Wang B, Xue J et al (2019) Development of vibration-assisted micro-milling device and effect of vibration parameters on surface quality and exit-burr. Proc Inst Mech Eng Part B J Eng Manuf 233(6):1723–172910.1177/0954405418774592 ↗
55. Niu Z, Jiao F, Cheng K (2018) Investigation on innovative dynamic cutting force modelling in micro-milling and its experimental validation. Nanomanuf Metrol 1(2):82–9510.1007/s41871-018-0008-9 ↗
56. Choong ZJ, Huo D, Degenaar P et al (2019) Micro-machinability and edge chipping mechanism studies on diamond micro-milling of monocrystalline silicon. J Manuf Process 38:93–10310.1016/j.jmapro.2019.01.004 ↗
57. Piljek P, Keran Z, Math M (2014) Micromachining. Interdiscip Descr Complex Syst 12(1):1–2710.7906/indecs.12.1.1 ↗
58. Qin Y (2015) Micromanufacturing engineering and technology. Elsevier Science & Technology Books, Norwich
59. Gao S, Pang S, Jiao L et al (2017) Research on specific cutting energy and parameter optimization in micro-milling of heat-resistant stainless steel. Int J Adv Manuf Technol 89(1/4):191–20510.1007/s00170-016-9062-x ↗
60. Mian AJ, Driver N, Mativenga PT (2011) Identification of factors that dominate size effect in micro-machining. Int J Mach Tools Manuf 51(5):383–39410.1016/j.ijmachtools.2011.01.004 ↗
61. Liu K, Melkote SN (2007) Finite element analysis of the influence of tool edge radius on size effect in orthogonal micro-cutting process. Int J Mech Sci 49(5):650–66010.1016/j.ijmecsci.2006.09.012 ↗
62. Attanasio A (2017) Tool run-out measurement in micro milling. Micromachines 8:221. https://doi.org/10.3390/mi807022110.3390/mi8070221 ↗
63. Alhadeff LL, Marshall MB, Curtis DT et al (2019) Protocol for tool wear measurement in micro-milling. Wear 420(421):54–6710.1016/j.wear.2018.11.018 ↗
64. Fang FZ, Xu F, Lai M (2015) Size effect in material removal by cutting at nano scale. Int J Adv Manuf Technol 80(1/4):591–59810.1007/s00170-015-7032-3 ↗
65. Rezaei H, Sadeghi MH, Budak E (2018) Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V. Int J Adv Manuf Technol 95(5/8):1617–163410.1007/s00170-017-1329-3 ↗
66. Huo D, Cheng K, Wardle F (2010) Design of a five-axis ultra-precision micro-milling machine—UltraMill. Part 1: holistic design approach, design considerations and specifications. Int J Adv Manuf Technol 47(9/12):867–87710.1007/s00170-009-2128-2 ↗
67. Jin X, Altintas Y (2012) Prediction of micro-milling forces with finite element method. J Mater Process Technol 212(3):542–55210.1016/j.jmatprotec.2011.05.020 ↗
68. Bissacco G, Hansen HN, Slunsky J (2008) Modelling the cutting edge radius size effect for force prediction in micro milling. CIRP Ann Manuf Technol 57(1):113–11610.1016/j.cirp.2008.03.085 ↗
69. Malekian M, Park SS, Jun MBG (2009) Modeling of dynamic micro-milling cutting forces. Int J Mach Tools Manuf 49(7/8):586–59810.1016/j.ijmachtools.2009.02.006 ↗
70. Vogler MP, Kapoor SG, DeVor RE (2004) On the modeling and analysis of machining performance in micro-end milling, Part II: cutting force prediction. J Manuf Sci Eng 126(4):695–70510.1115/1.1813471 ↗
71. Vogler MP, DeVor RE, Kapoor SG (2004) On the modeling and analysis of machining performance in micro-end milling, Part I: surface generation. J Manuf Sci Eng 126(4):685–69410.1115/1.1813470 ↗
72. Weule H, Hüntrup V, Tritschler H (2001) Micro-cutting of steel to meet new requirements in miniaturization. CIRP Ann 50(1):61–6410.1016/S0007-8506(07)62071-X ↗
73. Kim JD, Kim DS (1995) Theoretical analysis of micro-cutting characteristics in ultra-precision machining. J Mater Process Technol 49(3/4):387–39810.1016/0924-0136(94)01345-2 ↗
74. Vipindas K, Anand KN, Mathew J (2018) Effect of cutting edge radius on micro end milling: force analysis, surface roughness, and chip formation. Int J Adv Manuf Technol 97(1/4):711–72210.1007/s00170-018-1877-1 ↗
75. Moges TM, Desai KA, Rao PVM (2017) On modeling of cutting forces in micro-end milling operation. Mach Sci Technol 21(4):562–58110.1080/10910344.2017.1336179 ↗
76. Gao Q, Chen X (2019) Experimental research on micro-milling force of a single-crystal nickel-based superalloy. Int J Adv Manuf Technol 102(1/4):595–60410.1007/s00170-018-03211-x ↗
77. Zhang T, Liu Z, Sun X et al (2020) Investigation on specific milling energy and energy efficiency in high-speed milling based on energy flow theory. Energy 192:116596. https://doi.org/10.1016/j.energy.2019.11659610.1016/j.energy.2019.116596 ↗
78. Fang FZ, Thoe T, Song W et al (2000) Energy dissipation in high speed milling. ICOPE-2000 Singapore 27: 486–495
79. Li W, Kara S (2011) An empirical model for predicting energy consumption of manufacturing processes: a case of turning process. Proc Inst Mech Eng Part B J Eng Manuf 225(9):1636–164610.1177/2041297511398541 ↗
80. Liu N, Wang SB, Zhang YF et al (2016) A novel approach to predicting surface roughness based on specific cutting energy consumption when slot milling Al-7075. Int J Mech Sci 118:13–2010.1016/j.ijmecsci.2016.09.002 ↗
81. Yao Y, Zhu H, Huang C et al (2019) On the relations between the specific cutting energy and surface generation in micro-milling of maraging steel. Int J Adv Manuf Technol 104(1/4):585–59810.1007/s00170-019-03911-y ↗
82. Lauro CH, Brandão LC, Carou D et al (2015) Specific cutting energy employed to study the influence of the grain size in the micro-milling of the hardened AISI H13 steel. Int J Adv Manuf Technol 81(9/12):1591–159910.1007/s00170-015-7321-x ↗
83. Vollertsen F, Biermann D, Hansen HN et al (2009) Size effects in manufacturing of metallic components. CIRP Ann 58(2):566–58710.1016/j.cirp.2009.09.002 ↗
84. Dornfeld D, Min S, Takeuchi Y (2006) Recent advances in mechanical micromachining. CIRP Ann 55(2):745–76810.1016/j.cirp.2006.10.006 ↗
85. Moges TM, Desai KA, Rao PVM (2018) Modeling of cutting force, tool deflection, and surface error in micro-milling operation. Int J Adv Manuf Technol 98(9/12):2865–288110.1007/s00170-018-2415-x ↗
86. Uriarte L, Herrero A, Zatarain M et al (2007) Error budget and stiffness chain assessment in a micro-milling machine equipped with tools less than 0.3 mm in diameter. Precis Eng 31(1):1–1210.1016/j.precisioneng.2005.11.010 ↗
87. Mamedov A, Layegh KSE, Lazoglu I (2013) Machining forces and tool deflections in micro milling. Procedia CIRP 8:147–15110.1016/j.procir.2013.06.080 ↗
88. Lu X, Wang H, Jia Z et al (2019) Coupled thermal and mechanical analyses of micro-milling Inconel 718. Proc Inst Mech Eng Part B J Eng Manuf 233(4):1112–112610.1177/0954405418774586 ↗
89. Mamedov A, Layegh KSE, Lazoglu I (2015) Instantaneous tool deflection model for micro milling. Int J Adv Manuf Technol 79(5/8):769–77710.1007/s00170-015-6877-9 ↗
90. Oliaei SNB, Karpat Y (2016) Influence of tool wear on machining forces and tool deflections during micro milling. Int J Adv Manuf Technol 84(9/12):1963–198010.1007/s00170-015-7744-4 ↗
91. Rodríguez P, Labarga JE (2015) Tool deflection model for micro-milling processes. Int J Adv Manuf Technol 76(1/4):199–20710.1007/s00170-014-5890-8 ↗
92. Lu X, Wang Yang FK, et al (2019) An indirect method for the measurement of micro-milling forces. International manufacturing science and engineering conference 58752: V002T03A01310.1115/MSEC2019-2769 ↗
93. Lu X, Zhang H, Jia Z et al (2017) A new method for the prediction of micro-milling tool breakage. Volume 1: Processes, Los Angeles, California, USA: V001T02A03710.1115/MSEC2017-2999 ↗
94. Zhang X, Yu T, Wang W (2018) Prediction of cutting forces and instantaneous tool deflection in micro end milling by considering tool run-out. Int J Mech Sci 136:124–13310.1016/j.ijmecsci.2017.12.019 ↗
95. Nghiep TN, Sarhan AAD, Aoyama H (2018) Analysis of tool deflection errors in precision CNC end milling of aerospace aluminum 6061-T6 alloy. Measurement 125:476–49510.1016/j.measurement.2018.05.011 ↗
96. Liu JC, Su YL, Dong ZG et al (2014) Cutting tool run out considered cutting force estimation in micro milling processes. Appl Mech Mater 670/671:490–49610.4028/www.scientific.net/AMM.670-671.490 ↗
97. Zhang X, Yu T, Zhao J (2020) Surface generation modeling of micro milling process with stochastic tool wear. Precis Eng 61:170–18110.1016/j.precisioneng.2019.10.015 ↗
98. Afazov SM, Ratchev SM, Segal J et al (2020) Chatter modelling in micro-milling by considering process nonlinearities. Int J Mach Tools Manuf 56(2):28–38
99. Chen W, Sun Y, Huo D et al (2019) Modelling of the influence of tool runout on surface generation in micro milling. Chin J Mech Eng 32(2):2. https://doi.org/10.1186/s10033-019-0318-x10.1186/s10033-019-0318-x ↗
100. Jing X, Tian Y, Yuan Y et al (2017) A runout measuring method using modeling and simulation cutting force in micro end-milling. Int J Adv Manuf Technol 91(9/12):4191–420110.1007/s00170-017-0076-9 ↗