Enhanced cutting force model in micro-milling incorporating material separation criterion
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Engineering Technology and Methodologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Jing X, Zheng Z, Xu J et al (2022) Stability analysis in micro milling based on p-leader multifractal method. J Manuf Process 77:495–50710.1016/j.jmapro.2022.03.033 ↗
2. Chen N, Li HN, Wu J et al (2021) Advances in micro milling: from tool fabrication to process outcomes. Int J Mach Tools Manuf 160:103670. https://doi.org/10.1016/j.ijmachtools.2020.10367010.1016/j.ijmachtools.2020.103670 ↗
3. Balázs BZ, Geier N, Takács M et al (2021) A review on micro-milling: recent advances and future trends. Int J Adv Manuf Technol 112:655–68410.1007/s00170-020-06445-w ↗
4. Zhang X, Ehmann KF, Yu T et al (2016) Cutting forces in micro-end-milling processes. Int J Mach Tools Manuf 107:21–4010.1016/j.ijmachtools.2016.04.012 ↗
5. Malekian M, Park SS, Jun MBG (2009) Modeling of dynamic micro-milling cutting forces. Int J Mach Tools Manuf 49:586–59810.1016/j.ijmachtools.2009.02.006 ↗
6. Ozturk S, Altan E (2012) A slip-line approach to the machining with rounded-edge tool. Int J Adv Manuf Technol 63:513–52210.1007/s00170-012-3941-6 ↗
7. Jin X, Altintas Y (2011) Slip-line field model of micro-cutting process with round tool edge effect. J Mater Process Technol 211:339–35510.1016/j.jmatprotec.2010.10.006 ↗
8. Jing X, Lv R, Chen Y et al (2020) Modelling and experimental analysis of the effects of run out, minimum chip thickness and elastic recovery on the cutting force in micro-end-milling. Int J Mech Sci 176:105540. https://doi.org/10.1016/j.ijmecsci.2020.10554010.1016/j.ijmecsci.2020.105540 ↗
9. Denkena B, Michaelis A, Herrmann M et al (2020) Influence of tool material properties on the wear behavior of cemented carbide tools with rounded cutting edges. Wear 456/457:203395. https://doi.org/10.1016/J.WEAR.2020.20339510.1016/J.WEAR.2020.203395 ↗
10. Hu C, Zhuang K, Weng J et al (2019) Thermal-mechanical model for cutting with negative rake angle based on a modified slip-line field approach. Int J Mech Sci 164:105167. https://doi.org/10.1016/j.ijmecsci.2019.10516710.1016/j.ijmecsci.2019.105167 ↗
11. Waldorf DJ, Devor RE, Kapoor SG (1998) A slip-line field for ploughing during orthogonal cutting. J Manuf Sci Eng 120:693–69910.1115/1.2830208 ↗
12. Yuan Y, Jing X, Ehmann KF et al (2018) Modeling of cutting forces in micro end-milling. J Manuf Process 31:844–85810.1016/j.jmapro.2018.01.012 ↗
13. Yun HT, Heo S, Lee MK et al (2011) Ploughing detection in micromilling processes using the cutting force signal. Int J Mach Tools Manuf 51:377–38210.1016/j.ijmachtools.2011.01.003 ↗
14. Malekian M, Mostofa MG, Park SS et al (2012) Modeling of minimum uncut chip thickness in micro machining of aluminum. J Mater Process Technol 212:553–55910.1016/j.jmatprotec.2011.05.022 ↗
15. Qu D, Wang B, Gao Y et al (2021) A comprehensive micro-milling force model for a low-stiffness machining system. J Manuf Sci Eng-Trans ASME 143:111004. https://doi.org/10.1115/1.405100510.1115/1.4051005 ↗
16. Cappellini C, Abeni A, Attanasio A (2023) Modelling of micro-milling by considering tool run-out and ploughing regime. Procedia CIRP 118:402–40710.1016/j.procir.2023.06.069 ↗
17. Chen N, Li L, Wu J et al (2019) Research on the ploughing force in micro milling of soft-brittle crystals. Int J Mech Sci 155:315–32210.1016/j.ijmecsci.2019.03.004 ↗
18. Arsecularatne JA (1997) On tool-chip interface stress distributions, ploughing force and size effect in machining. Int J Mach Tools Manuf 37:885–89910.1016/S0890-6955(97)00001-1 ↗
19. Jacobson S, Wallén P (1988) A new classification system for dead zones in metal cutting. Int J Mach Tools Manuf 28:529–53810.1016/0890-6955(88)90065-X ↗
20. Wan M, Li Y, Wen DY et al (2022) On cutting process damping for small cutters by including the influences of the dead metal zone and elastic recovery. J Mater Process Technol 306:117608. https://doi.org/10.1016/j.jmatprotec.2022.11760810.1016/j.jmatprotec.2022.117608 ↗
21. Uysal A, Ozturk S, Altan E (2015) An experimental study on dead metal zone in orthogonal cutting with worn rounded-edge cutting tools. Int J Mater Prod Technol 51:401–41210.1504/IJMPT.2015.072574 ↗
22. Wan M, Wen DY, Ma YC et al (2019) On material separation and cutting force prediction in micro milling through involving the effect of dead metal zone. Int J Mach Tools Manuf 146:103452. https://doi.org/10.1016/j.ijmachtools.2019.10345210.1016/j.ijmachtools.2019.103452 ↗
23. Hu C, Wang J, Lin L et al (2022) Characterization of material flow mechanism for chamfered tools utilizing coupled slip-line-slab method. J Mater Process Technol 300:117424. https://doi.org/10.1016/j.jmatprotec.2021.11742410.1016/j.jmatprotec.2021.117424 ↗
24. Kim CJ, Mayor JR, Ni J (2004) A static model of chip formation in microscale milling. J Manuf Sci Eng 126:710–71810.1115/1.1813475 ↗
25. Han J, Ma R, Kong L et al (2022) Investigation on chip formation mechanism of high-aspect-ratio micro-milled structures. J Manuf Process 80:743–75310.1016/j.jmapro.2022.06.014 ↗
26. Song B, Jing X, Yang H et al (2023) On unsteady-cutting state material separation and dead metal zone modeling considering chip fracture. J Manuf Process 108:62–7810.1016/j.jmapro.2023.10.072 ↗
27. Cappellini C, Abeni A (2024) An analytical micro-milling force model based on the specific cutting pressure-feed dependence, in presence of ploughing and tool run-out effects. J Manuf Process 116:224–24510.1016/j.jmapro.2024.02.057 ↗
28. Bao WY, Tansel IN (2000) Modeling micro-end-milling operations. Part I: analytical cutting force model. Int J Mach Tools Manuf 40:2155–217310.1016/S0890-6955(00)00054-7 ↗
29. Bao WY, Tansel IN (2000) Modeling micro-end-milling operations. Part II: tool run-out. Int J Mach Tools Manuf 40:2175–219210.1016/S0890-6955(00)00055-9 ↗
30. Li C, Lai X, Li H et al (2007) Modeling of three-dimensional cutting forces in micro-end-milling. J Micromech Microeng 17:671. https://doi.org/10.1088/0960-1317/17/4/00110.1088/0960-1317/17/4/001 ↗
31. Zhou Y, Tian Y, Jing X et al (2017) A novel instantaneous uncut chip thickness model for mechanistic cutting force model in micro-end-milling. Int J Adv Manuf Technol 93:2305–231910.1007/s00170-017-0638-x ↗
32. Jing X, Lv R, Song B et al (2021) A novel run-out model based on spatial tool position for micro-milling force prediction. J Manuf Process 68:739–74910.1016/j.jmapro.2021.06.006 ↗