Fatigue mechanisms and life prediction of cracked steel elements repaired with cold-expanded crack-stop holes
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical Behavior of Composites · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Fatigue evaluation and structural optimization of rib-to-diaphragm connection in orthotropic steel decks
2. Revolutionizing steel structures: bridging research and sustainable design for future societal impact
3. Experimental and probabilistic study of fatigue crack growth behavior of steel Q345qC under different stress ratios
4. Retardation mechanisms and modeling of fatigue crack growth of a high-strength steel after single overload
5. Research on fatigue crack propagation behavior and reliability evaluation of steel bridge
6. Intelligent fatigue-resistant design of crack-stop hole under arbitrary loading mode
7. Local MIL-HDBK-5D equivalent stress based fatigue assessment of the gusset welded joint improved by Portable Pneumatic Needle-Peening treatment
8. Cold reinforcement and evaluation of steel bridges with fatigue cracks10.1061/(ASCE)BE.1943-5592.0001219 ↗
9. Fatigue strength upgrading of cover plate ends by welded extensions in existing steel bridge girders10.1061/(ASCE)BE.1943-5592.0001228 ↗
10. Fatigue failure mechanisms and probabilistic S-N curves for CFRP–steel adhesively bonded joints
11. Enhancing bond performance of CFRP-steel epoxy-bonded interface by electrospun nanofiber veils
12. Retardation of fatigue crack growth in high strength steel S690 using a modified stop-hole technique
13. Optimization of stop-hole parameters for cracks at diaphragm-to-rib weld in steel bridges
14. Experimental investigation on fatigue performance of cold-expanded crack-stop hole repaired steel plates with type Ⅰ cracks
15. Investigation on fatigue performance and residual stress release mechanism of split sleeve cold expansion holes of heterogeneous 7050-T7451 aluminum alloy
16. Fatigue life prediction of cold expansion hole using physics-enhanced data-driven method
17. Effect of split sleeve cold expansion on microstructure and fatigue performance of 7075-T6 aluminum alloy holes
18. A calculation method for residual stress of cold expanded hole based on measured springback
19. The effects of the cold expansion degree on the fatigue crack growth rate in rail steel
20. Effect of local cold working on the fatigue life of 7475-T7351 aluminium alloy hole specimens10.1016/j.engfracmech.2007.10.011 ↗
21. Advancements in cold extrusion anti-fatigue manufacturing technology for connecting holes
22. Effect of split sleeve cold expansion on fatigue and fracture of rolled AZ31B magnesium alloy
23. Research status and tendency on cold expansion anti-fatigue manufacturing technology for aircraft structural fastening holes
24. Effects of lubrication conditions on cold expansion fatigue strengthening performances of titanium alloy open hole structures
25. Cold expansion fatigue performance investigations of GH4169 inclined hole structures using numerical and experimental methods
26. Fractographic examination of coupons representing aircraft structural joints with and without hole cold expansion
27. Investigation on fatigue performance of cold expansion holes of 6061-T6 aluminum alloy
28. Investigations on microstructure evolution and mechanical properties of 7075-T651 aluminum alloy plates under electromagnetic cold expansion
29. On the prediction of initiation life for fatigue crack emanating from small cold expanded holes10.1016/j.jmatprotec.2012.04.004 ↗
30. Experimental study on the effect of reaming on the fatigue life of split-sleeve cold-expanded Ti–6Al–4V alloy components
31. Effect of cold expansion on the fatigue life of Al 2024-T3 in double shear lap joints: experimental and numerical investigations
32. Fatigue life enhancement mechanism and lifetime prediction of AA6061-T6 open-holed sheet treated by electromagnetic driving dynamic cold expansion
33. Prediction on the fatigue behavior of Ti–6Al–4V components treated by split sleeve cold expansion with different final reaming depth
34. Fatigue response of open hole plates: a finite element simulation investigating the influence of dynamic and static cold expansion processes
35. Effect of edge distance ratio on residual stresses induced by cold expansion and fatigue life of TC4 plates
36. ASTM E8/E8M. Stand Test Methods for Tensile Testing of Metallic Materials. American Society for Testing and Materials: ASTM; 2013.
37. Optimization of machining parameters and electrochemical corrosion behavior of hardened Cr12MoV mold steel10.20964/2020.05.49 ↗
38. ASTM E647-24. Standard Test Method for Measurement of Fatigue Crack Growth Rates. ASTM International; 2024.
39. Investigation on fatigue failure of split-sleeve cold expansion holes of 7075-T651 aluminum alloy
40. Numerical investigation on pulling force and residual stresses in split-sleeve cold expansion of 2024-T3 aluminium alloy holes using a variable friction model
41. Experimental and numerical investigations on the influence of cold expansion on low cycle fatigue life of bolt holes in aeroengine superalloy disk at elevated temperature
42. Numerical and experimental investigation of the cold expansion process with split sleeve in titanium alloy TC4
43. Experimental and numerical comparison of cold expansion and interference fit methods in improving fatigue life of holed plate in double shear lap joints10.1016/j.ast.2013.04.006 ↗
44. A novel method and tool which enhance the fatigue life of structural components with fastener holes
45. The effect of cold expansion on improving the fatigue life of fastener holes10.1016/S1350-6307(02)00028-6 ↗
46. Effect of cold expansion on fatigue performance of open holes10.1016/j.msea.2007.05.034 ↗
47. Synergy effects in the fatigue crack growth of hole cold expanded specimens under variable cyclic loading
48. Cold expansion of holes and resulting fatigue life enhancement and residual stresses in Al 2024 T3 alloy – an experimental study10.1016/j.engfailanal.2009.08.002 ↗
49. Effect of residual stresses induced by cold expansion on the crack growth in 6082 aluminum alloy
50. Finite element method and experimental investigation on the residual stress fields and fatigue performance of cold expansion hole10.1016/j.matdes.2009.09.031 ↗
51. Effect of cold expansion on high-temperature low-cycle fatigue performance of the nickel-based superalloy hole structure
52. The synergistic effect of gradient nanostructure and residual stress induced by expansion deformation on the tension-tension fatigue performance of Ti6Al4V holes
53. A novel cold expansion process for improving the surface integrity and fatigue life of small-deep holes in Inconel 718 superalloys
54. Improving the fatigue life of 2297-T87 aluminum-lithium alloy lugs by cold expansion, interference fitting, and their combination
55. Analysis of cold expanded fastener holes subjected to short time creep: finite element modelling and fatigue tests10.1016/j.matdes.2009.12.047 ↗
56. Numerical simulation of residual stress relaxation around a cold-expanded fastener hole under longitudinal cyclic loading using different kinematic hardening models10.1111/j.1460-2695.2010.01485.x ↗
57. Experimental investigation on fatigue crack behavior of bridge steel Q345qD base metal and butt weld
58. Stress intensity factors and fatigue growth life of crescent-shaped cracks initiated from a spherical cavity
59. ASTM E399-22. Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials. ASTM International; 2022.
60. Numerical analysis of crack propagation in cyclic-loaded structures10.1115/1.3609637 ↗
61. Stress ratio effect on fatigue crack growth behavior for steels related to yield-to-tensile strength ratio and fracture toughness
62. Estimation of stress concentration factor at stop-hole repair strengthened by bonded patches
63. 4 - effect of size and geometry of small defects on the fatigue limit
64. Stress-intensity factors for a wide range of semi-elliptical surface cracks in finite-thickness plates10.1016/0013-7944(79)90139-5 ↗
65. Numerical analysis of crack propagation in fretting fatigue specimen repaired by stop hole method
66. A modified SWT model for very high cycle fatigue life prediction of L-PBF Ti-6Al-4V alloy based on Single defect: effect of building orientation
67. Probabilistic fatigue life prediction of small sample properties notched specimens under multiaxial loading
68. A modified critical plane energy–energy gradient based multiaxial fatigue life prediction model for smooth/notched specimens
69. A unified approach to model the effect of porosity and high surface roughness on the fatigue properties of additively manufactured Ti6-Al4-V alloys
70. The theory of critical distances: a review of its applications in fatigue10.1016/j.engfracmech.2006.12.004 ↗
71. Geometrical effects in fatigue: a unifying theoretical model10.1016/S0142-1123(99)00007-9 ↗
72. Critical distance-based fatigue evaluation of welded joints in steel bridge under bending loading
73. A novel formulation of the theory of critical distances to estimate lifetime of notched components in the medium-cycle fatigue regime10.1111/j.1460-2695.2007.01122.x ↗
74. Fatigue assessment of U-rib full penetration welded joints based on local methods