The influence of T-stress on plasticity induced crack closure under plane strain conditions
Source abstract
Abstract
Abstract A small scale yielding two-parameter modified boundary layer analysis is performed to study the occurrence of plasticity induced fatigue crack closure under constant amplitude plane strain conditions. A wide range of T-stress and KI levels are considered in the finite element analysis with the purpose of exploring the behavior of the crack opening stress. The influence of the T-stress on crack closure is shown. Crack closure was observed for some values of T-stress, while other values of T-stress resulted in an absence of closure under steady-state conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical stress and fatigue analysis · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. The relevance of crack closure to fatigue crack propagation10.1016/0025-5416(74)90109-8 ↗
2. Fatigue crack retardation and closure in polymethylmethacrylate10.1016/0013-7944(74)90065-4 ↗
3. Crack closure measurement along the fatigue crack front of center-cracked specimens10.1007/BF00032551 ↗
4. Edge effects on fatigue crack closure of aluminum alloys10.1016/0036-9748(79)90176-5 ↗
5. Newman Jr JC. A Crack-closure model for predicting fatigue crack growth under aircraft spectrum loading. In: Chang JB, Hudson CM, editors. Methods and models for predicting fatigue crack growth under random loading, ASTM STP 748; 1981. p. 53–84.10.1520/STP28334S ↗
6. An experimental and numerical study of crack closure10.1016/0013-7944(85)90039-6 ↗
7. Finite element analysis of plasticity-induced crack closure under plane strain conditions10.1016/0013-7944(86)90258-4 ↗
8. Fleck NA, Newman Jr JC. Analysis of crack closure under plane strain conditions. In: Newman Jr JC, Elber W, editors. Mechanics of fatigue crack closure, ASTM STP 982; 1988. p. 319–41.10.1520/STP27218S ↗
9. Mechanisms of crack closure in plane strain and plane stress
10. Modeling of plane strain fatigue crack closure10.1115/1.2903380 ↗
11. Finite element visualization of fatigue crack closure in plane stress and plane strain10.1007/BF00035167 ↗
12. A study of fatigue crack closure in polycarbonate CT specimens10.1016/S0013-7944(00)00014-X ↗
13. Finite-element analysis of fatigue crack closure under plane strain conditions: stabilization behavior a mesh size effect10.1111/j.1460-2695.2005.00881.x ↗
14. The evolution of the stress-fields near a fatigue crack tip and plasticity-induced crack closure revisited10.1111/j.1460-2695.2004.00716.x ↗
15. Finite element modeling of plasticity-induced crack closure with emphasis on geometry and mesh effects10.1016/S0013-7944(02)00168-6 ↗
16. Finite element analysis of plasticity-induced fatigue crack closure: an overview10.1016/S0013-7944(03)00099-7 ↗
17. Dougherty JD, Srivatsan TS, Padovan J. A combined experimental and finite element study of crack closure effects in modified 1070 steel. Fatigue and fracture mechanics. ASTM STP 1360, vol. 30; 1998. p. 227–39.10.1520/STP13406S ↗
18. Experimental and analytical estimates of fatigue crack closure in an aluminum–copper alloy Part II: a finite element analysis10.1111/j.1460-2695.1997.tb01540.x ↗
19. Fatigue crack closure determination by means of the finite element analysis10.1016/j.engfracmech.2007.02.020 ↗
20. Influence of minimum element size to determine crack closure stress by the finite element method10.1016/j.engfracmech.2004.04.002 ↗
21. Some issues on finite element modeling of plasticity induced crack closure due to constant amplitude loading10.1016/j.ijfatigue.2008.01.013 ↗
22. Finite element crack closure analysis of a compact tension specimen10.1016/j.ijfatigue.2007.02.012 ↗
23. A numerical investigation of 3-D small-scale yielding fatigue crack growth10.1016/S0013-7944(03)00003-1 ↗
24. Three-dimensional effects on fatigue crack closure in the small-scale yielding regime – a finite element study10.1046/j.1460-2695.2003.00655.x ↗
25. Effect of the T-stress on fatigue crack closure in 3-D small-scale yielding10.1016/j.ijsolstr.2003.11.004 ↗
26. A comparison of two and three-dimensional analyses of fatigue crack closure10.1016/j.ijfatigue.2006.03.014 ↗
27. Numerical simulation of plasticity-induced fatigue crack closure with emphasis on the crack growth scheme: 2D and 3D analyses10.1016/j.engfracmech.2007.10.017 ↗
28. On the stress distribution at the base of a stationary crack10.1115/1.4011454 ↗
29. Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic–plastic materials10.1016/0022-5096(73)90024-0 ↗
30. Brocks W, Schmitt W. The second parameter in J–R curves: constraint or triaxiality. In: Kirk Mark, Bakker Ad, editors. Constraint effects in fracture theory and applications. ASTM STP 1244, vol. 2; 1995. p. 209–31.10.1520/STP14637S ↗
31. Limitations to the small scale yielding approximation for crack tip plasticity10.1016/0022-5096(74)90010-6 ↗
32. Inherent stress biaxiality in various fracture specimen geometries10.1007/BF00012486 ↗
33. Some evaluations of the elastic T-term using Eshelby’s method10.1007/BF00019710 ↗
34. Compendium of T-stress solutions for two and three dimensional cracked geometries10.1111/j.1460-2695.1995.tb00148.x ↗
35. Anderson · 2005
36. Two-parameter characterization of elastic–plastic crack tip fields10.1115/1.2897135 ↗
37. Hancock JW, Reuter WG, Parks DM. Constraint and toughness parameterized by T. In: Hackett EM, Schwalbe K-H, Dodds RH, editors. Constraint effects in fracture. ASTM STP 1171; 1993. p. 21–40.10.1520/STP18021S ↗
38. T-stress and its implications for crack growth10.1016/S0013-7944(02)00002-4 ↗
39. Quantification of the effect of specimen geometry on the fatigue crack growth response by two-parameter fracture mechanics
40. Effect of constraint on fatigue crack propagation near threshold in medium carbon steel10.1016/j.commatsci.2005.12.025 ↗
41. Mode I fatigue crack growth under biaxial loading10.1016/j.ijfatigue.2005.06.020 ↗
42. Gullerud A, Koppenhoefer K, Roy A, Roychowdhury S, Walters M, Bichon B, et al. WARP3D-release 15.8, 3-D dynamic nonlinear fracture analysis of solids using parallel computers and workstations. Department of Civil Engineering, University of Illinois at Urbana–Champaign; 2007.
43. Constitutive modeling of Rachetting effects10.1115/1.3226484 ↗
44. Simulation of Ratchetting behavior based on non-linear plasticity model considering recovery effect
45. On some modifications of kinematic hardening to improve the description of Rachetting effects10.1016/0749-6419(91)90050-9 ↗
46. Ratcheting in cyclic plasticity, part I: uniaxial behavior10.1016/0749-6419(92)90040-J ↗
47. Stress state dependance of cyclic Ratchetting behavior of two rail steels10.1016/S0749-6419(95)00005-4 ↗
48. Ratchetting: recent progress in phenomenon observation, constitutive modeling and application10.1016/j.ijfatigue.2007.10.002 ↗
49. Recent advances in fatigue crack growth modeling10.1007/BF00012668 ↗
50. On the finite element analysis of fatigue crack closure-2. Numerical results10.1016/0013-7944(89)90028-3 ↗