Influence of local fatigue damage evolution on crack initiation behavior in a friction stir welded Al-Mg-Sc alloy
Source abstract
Abstract
Abstract Axial loading fatigue tests were carried out in a friction stir welded Al-Mg-Sc alloy. Local strain evolution under fatigue loading was monitored using small strain gages. The weld joint had very complex heterogeneous microstructure and hardness distributions. The cyclic stress-strain responses were strongly dependent on the local hardness distribution. The cyclic plastic strain was observed intensively on the advancing side in the soft stir zone. Transgranular fatigue cracks initiated in the stir zone on the top surface, where high plastic strain was observed. To the contrary, intergranular crack initiations were observed on the bottom surface. The crack initiation was caused mainly by the cyclic plastic straining on the top side. However on the bottom side, the residual initial oxide layer, which was not sufficiently stirred, as well as the local cyclic plastic straining could be attributed to the intergranular crack initiations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Thomas WM, Nicholas ED, Needham JC, Murch MG, Temple-Smith P, Dawes CJ. Improvements relating to friction welding. European Patent Specification EP 0 615 480 B1; 1992.
2. Friction stir welding and processing
3. Microstructural studies of friction stir welds in 2024–T3 aluminium10.1016/S0921-5093(01)01358-2 ↗
4. Tensile properties and fracture locations of friction-stir-welded joints of 2017–T351 aluminum alloy10.1016/S0924-0136(03)00806-9 ↗
5. Monotonic and cyclic strength of friction stir welded aluminium joints
6. The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024–T351 aluminium joints10.1016/S0142-1123(02)00038-5 ↗
7. Comparative study on fatigue properties between AA2024-T4 friction stir welds and base materials10.1016/j.msea.2006.07.009 ↗
8. Evaluation of crack nucleation site and mechanicak properties for friction stir welded butt joint in 2024–T3 aluminium alloy10.1007/s00170-009-2513-x ↗
9. New Al-Mg-Sc alloys10.1016/S0921-5093(99)00673-5 ↗
10. Fatigue properties of Al-Mg alloys with and without scandium10.1016/S0921-5093(97)00224-4 ↗
11. A study of coarsening, recrystallization, and morphology of microstructure in Al-Sc-(Zr)-(Mg) alloys10.1007/s11661-004-0135-3 ↗
12. Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys10.1016/S1359-6454(01)00116-1 ↗
13. Precipitation of Al3Sc in binary Al-Sc alloys10.1016/S0921-5093(01)01326-0 ↗
14. Comparison of TIG welded and friction stir welded Al-4.5Mg-0.26Sc alloy10.1016/j.jmatprotec.2007.06.035 ↗
15. The short crack problem10.1111/j.1460-2695.1982.tb01250.x ↗
16. The growth of small fatigue cracks in a low carbon steel; the effect of microstructure and limitation of linear elastic mechanics10.1111/j.1460-2695.1986.tb00447.x ↗
17. Fatigue performance of friction-stir-welded Al-Mg-Sc alloy10.1007/s11661-016-3843-6 ↗
18. Fatigue behavior of friction stir welded Al-Mg-Sc alloy10.1016/j.ijfatigue.2015.02.013 ↗
19. Comparative study on local and global mechanical properties of 2024 T351, 2024 T6 and 5251 O friction stir welds10.1016/j.msea.2005.09.032 ↗
20. Near-surface mechanical heterogeneities in a dissimilar aluminum alloys friction stir welded joint10.1016/j.matdes.2016.06.091 ↗
21. A.J. Leonardo, S.A. Lockyer: Flaws in friction stir welds, Proc. of 4th Int. Symposium on Friction Stir Welding, Park City, Utah, USA, 2003.
22. Characteristics of the kissing-bond in friction stir welded Al alloy 105010.1016/j.msea.2005.06.008 ↗
23. Effect of oxide array on the fatigue property of friction stir welds10.1016/j.scriptamat.2005.12.036 ↗
24. Investigation of the microstructure and properties of a friction stir welded Al-Mg-Sc alloy10.4028/www.scientific.net/MSF.426-432.2987 ↗
25. Microstructure evolution during friction stir welding of commercial aluminum alloys
26. An experimental investigation of temperature distribution and joint properties of Al 7075 T651 friction stir welded alloys10.1016/j.protcy.2016.03.061 ↗
27. A TEM study of precipitation and related microstructures in friction-stir-welded 6061 aluminium10.1023/A:1004385928163 ↗
28. FIB-assisted TEM study of an oxide array in the root of a friction stir welded aluminium alloy10.1016/j.scriptamat.2003.10.008 ↗
29. Influence of joint line remnant on crack paths under static and fatigue loadings in friction stir welded Al-Mg-Sc alloy