Observations and analyses of secondary bending for riveted lap joints

The phenomenon of secondary bending in riveted lap joints of the configuration representative of connections of the aircraft fuselage sheets in the longitudinal direction is investigated experimentally and analytically. The experiments involved strain gauge measurements of secondary bending stresses carried out in close proximity to the fatigue critical section of the riveted lap joint and fatigue tests performed to study the effect of secondary bending on the riveted joint fatigue life. The strain gauge measurement results allowed validation of a simple analytical model proposed by Schijve to estimate secondary bending moments induced in mechanically fastened joints with eccentricities. Variables considered in the fatigue tests were several joint geometry related parameters known to influence the magnitude of secondary bending in the fatigue critical location. It was shown that the fatigue test data for joints of various geometries, which were considerably scattered if the fatigue lives were presented against the applied stress amplitude, could become consolidated within common scatter bands when the lives were plotted in terms of the combined tensile stress amplitude including the bending stress computed from the model by Schijve.