An experimental study of the interfacial fracture behavior of Titanium/CFRP adhesive joints under mode I and mode II fatigue
Source abstract
Abstract
Abstract In the present paper, the mode I and II fatigue fracture performance of a novel Titanium/CFRP adhesive joint is investigated. The adhesive joint under study is composed of two thin adherents, one Titanium sheet and one CFRP laminate, and is reinforced from both sides with two thick aluminum beams to increase its flexural stiffness and ensure the non-yielding of the Titanium. The interfacial fracture resistance is in the focus and aspects such as the loading that defines the crack propagation threshold as well as the utilization of an appropriate Paris-like law to optimally describe the experimental data are under investigation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Adhesive bonding of aircraft structures10.1016/S0143-7496(00)00006-3 ↗
2. Review on techniques to improve the strength of adhesive joints with composite adherends10.1016/j.compositesb.2019.107363 ↗
3. Parametric study of adhesive joints with composites10.1016/j.ijadhadh.2012.01.019 ↗
4. A study on the strength of adhesively bonded joints with different adherends10.1016/j.compositesb.2014.03.001 ↗
5. Static strength prediction of adhesive joints: a review10.1016/j.ijadhadh.2019.102451 ↗
6. A review of finite element analysis of adhesively bonded joints10.1016/j.ijadhadh.2011.01.006 ↗
7. Coupling effects in adhesive bonded joints10.1016/S0263-8223(02)00002-8 ↗
8. Assessment of alternative joining techniques for Ti-6Al-4V/CFRP hybrid joints regarding tensile and fatigue strength10.1016/j.matdes.2015.04.051 ↗
9. Surface treatment of titanium for adhesive bonding to polymer composites: a review10.1016/S0143-7496(00)00044-0 ↗
10. Santos DG do, Carbas RJC, Marques EAS, da Silva LFM. Reinforcement of CFRP joints with fibre metal laminates and additional adhesive layers. Compos Part B Eng 2019. https://doi.org/10.1016/j.compositesb.2019.01.096.10.1016/j.compositesb.2019.01.096 ↗
11. Reduction of thermal residual stress in carbon fiber aluminum laminates using a thermal expansion clamp10.1016/j.compositesa.2011.04.001 ↗
12. The effects of interfacial adhesion strength on the characteristics of an aluminum/CFRP hybrid beam under transverse quasi-static loading10.1016/j.compositesb.2014.06.017 ↗
13. Mechanical behaviors of Ti/CFRP/Ti laminates with different surface treatments of titanium sheets10.1016/j.compstruct.2016.12.033 ↗
14. Preliminary evaluation of hybrid titanium composite laminates10.1080/00218469508014392 ↗
15. Methods for the prediction of fatigue delamination growth in composites and adhesive bonds - a critical review10.1016/j.engfracmech.2013.10.003 ↗
16. Paris P. The fracture mechanics approach to fatigue. In: 10th Sagamore army materials research conference. Syracuse University Press; 1964. p. 107–32.
17. The stresses around a fault or crack in dissimilar media10.1785/BSSA0490020199 ↗
18. Mode I fatigue delamination of Zanchor-reinforced CF/epoxy laminates10.1016/j.ijfatigue.2009.02.025 ↗
19. Modes I and II interlaminar fracture toughness and fatigue delamination of CF/epoxy laminates with self-same epoxy interleaf10.1016/j.ijfatigue.2006.02.004 ↗
20. Experimental investigation of R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints under CA loading10.1016/j.compositesa.2011.10.018 ↗
21. Delamination fatigue crack growth in unidirectional graphite/epoxy laminates10.1177/073168448700600104 ↗
22. Experimental investigation on the influence of crack front to fiber orientation on fatigue delamination growth rate under mode II10.1016/j.compscitech.2005.04.033 ↗
23. Stress ratio effect on cyclic debonding in adhesively bonded composite joints10.1016/0263-8223(87)90014-6 ↗
24. Two-parameter model for delamination growth under mode i fatigue loading (Part A: Experimental study)10.1016/j.compositesa.2014.06.007 ↗
25. Study of load ratio for mode-I fatigue fracture of wood-FRP-bonded interfaces10.1177/0021998304042083 ↗
26. Application of the energy release rate approach for delamination growth in Glare10.1016/j.engfracmech.2005.10.006 ↗
27. Application of the Hartman-Schijve equation to represent Mode I and Mode II fatigue delamination growth in composites10.1016/j.compstruct.2011.11.030 ↗
28. Cyclic-fatigue crack growth in composite and adhesively-bonded structures: the FAA slow crack growth approach to certification and the problem of similitude10.1016/j.ijfatigue.2016.03.008 ↗
29. Misinterpreting the results: how similitude can improve our understanding of fatigue delamination growth10.1016/j.compscitech.2010.11.010 ↗
30. Alderliesten R, Alderliesten RC. How proper similitude principles could have improved our understanding about fatigue damage growth Fatigue and Fracture of Fibre Metal Laminates View project How proper similitude principles could have improved our understanding about fatigue damage growth; 2015.
31. Characterising resistance to fatigue crack growth in adhesive bonds by measuring release of strain energy
32. The effect of temperature on fatigue crack growth in FM94 epoxy adhesive bonds investigated by means of energy dissipation10.1016/j.engfracmech.2017.10.007 ↗
33. Hygrothermal effect on the strain energy release rates and mode mixity of asymmetric delaminations in generally layered beams10.1016/j.engfracmech.2019.03.006 ↗
34. Compliance based method for testing fatigue delamination propagation in laminates10.1016/j.engfracmech.2018.06.043 ↗
35. Mode I, II and Mixed Mode I/II delamination growth in composites10.1016/j.compstruct.2013.12.009 ↗
36. An automated methodology for mode II delamination tests under fatigue loading based on the real time monitoring of the specimen’s compliance10.1016/j.ijfatigue.2015.09.021 ↗
37. On the fracture toughness of metal-composite adhesive joints with bending-extension coupling and residual thermal stresses effect10.1016/j.compositesb.2019.107694 ↗
38. Loutas T, Tsokanas P, Kostopoulos V, Nijhuis P, van den Brink WM. Mode I fracture toughness of asymmetric metal-composite adhesive joints. Mater Today-Proc. 2020. https://doi.org/10.1016/j.matpr.2020.03.075.10.1051/matecconf/201930401004 ↗
39. On the compliance and energy release rate of generically-unified beam-type fracture specimens10.1177/0021998310371545 ↗
40. Mode II fracture toughness of asymmetric metal-composite adhesive joints10.1051/matecconf/201930401004 ↗
41. The relation between the strain energy release in fatigue and quasi-static crack growth10.1016/j.engfracmech.2015.07.018 ↗
42. An efficient methodology for the experimental characterization of mode II delamination growth under fatigue loading10.1016/j.ijfatigue.2016.10.017 ↗
43. Understanding mixed-mode cyclic fatigue delamination growth in unidirectional composites: an experimental approach10.1016/j.engfracmech.2017.05.049 ↗