Influence of prior corrosion on the high cycle fatigue behavior of microarc oxidation coated 6061-T6 Aluminum alloy
Source abstract
Abstract
The objective of this study is to evaluate the influence of prior immersion of microarc oxidation coated and uncoated Al alloy in 3.5% NaCl solution up to 168 h on their high cycle fatigue behavior. The prior immersion caused pitting on uncoated Al alloy while in the case of MAO coated Al alloy no pits were observed. Electrochemical impedance spectroscopy revealed progressive degradation of the MAO coated Al alloy with increasing duration of immersion. The fatigue life of MAO coated Al alloy decreased with increasing duration of immersion but at a significantly lower rate than in the case of the uncoated Al alloy. Thus, MAO coatings provided a measure of protection under corrosion fatigue conditions as compared to the uncoated Al alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. The effect of pitting on bending fatigue performance of high-strength aluminium alloy10.1016/j.scriptamat.2007.04.045 ↗
2. Effect of pitting corrosion on very high cycle fatigue behavior10.1016/S1359-6462(03)00365-8 ↗
3. Effect of anodic oxidation on fatigue performance of 7075-T6 alloy10.1016/j.surfcoat.2008.06.049 ↗
4. Anodic spark deposition from aqueous solutions of NaAlO2 and Na2SiO310.1111/j.1151-2916.1971.tb12328.x ↗
5. Discharge characterization in plasma electrolytic oxidation of aluminium10.1088/0022-3727/36/17/314 ↗
6. Production of hard and heat-resistant coatings on aluminium using a plasma micro-discharge10.1016/S0257-8972(99)00421-1 ↗
7. Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology10.1016/S0257-8972(02)00918-0 ↗
8. Plasma electrolytic fabrication of oxide ceramic surface layers for tribotechnical purposes on aluminium alloys10.1016/S0257-8972(98)00694-X ↗
9. The tribological performance of ultra-hard ceramic composite coatings obtained through microarc oxidation10.1016/S0257-8972(02)00646-1 ↗
10. The sliding wear resistance and frictional characteristics of surface modified aluminium alloys under extreme pressure10.1016/S0043-1648(98)00355-X ↗
11. Kinetics and properties of microarc oxidation coatings deposited on commercial Al alloys10.1007/s11661-006-9054-9 ↗
12. Abrasive wear/corrosion properties and TEM analysis of Al2O3 coatings fabricated using plasma electrolysis10.1016/S0257-8972(01)01453-0 ↗
13. Effect of microarc oxidation coatings on corrosion resistance of 6061-Al alloy10.1007/s11665-008-9222-8 ↗
14. Corrosion, erosion and erosion–corrosion performance of plasma electrolytic oxidation (PEO) deposited Al2O3 coatings10.1016/j.surfcoat.2004.09.038 ↗
15. Corrosion evaluation of microarc oxidation coatings formed on 2024 aluminium alloy10.1016/j.corsci.2010.04.022 ↗
16. The effect of oxide coatings on fatigue properties of 7475-T6 aluminium alloy10.1016/j.surfcoat.2006.02.002 ↗
17. High-cycle fatigue behavior of microarc oxidation coatings deposited on a 6061-T6 Al alloy10.1007/s11661-009-0057-1 ↗
18. Effect of combined shot-peening and PEO treatment on fatigue life of 2024 Al alloy10.1016/j.tsf.2006.07.123 ↗
19. The influence of the coating technique on the high cycle fatigue life of alumina coated 6061-T6 Al alloy10.1007/s12666-010-0028-7 ↗
20. Rama Krishna L, Rybalco AV, Sundararajan G. United States Patent No. 6893,551 B2.
21. The interpretation of impedance measurements on oxide coated aluminium10.1016/0040-6090(73)90160-0 ↗
22. The application of impedance methods to study the effects of water uptake and chloride ion concentration on the degradation of paint films-I. Attached films10.1016/0010-938X(91)90094-6 ↗
23. Porosity in plasma electrolytic oxide coatings10.1016/j.actamat.2005.12.029 ↗
24. Impedance study on the corrosion of PVD and CVD titanium nitride coatings10.4028/www.scientific.net/MSF.44-45.29 ↗