Experimental investigation on anelasticity-controlled cyclic creep behavior in multiscale hybrid-reinforced TiAl alloys
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Anelasticity in austenitic stainless steel10.1016/j.actamat.2012.08.060 ↗
2. Influence of anelastic recovery on the cyclic creep behavior of AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.ijfatigue.2023.108111 ↗
3. Comparison of primary creep regeneration and anelastic recovery behaviour of 316H austenitic and 10%Cr martensitic steels10.1016/j.mechmat.2020.103474 ↗
4. The role of anelastic recovery in the creep-fatigue interaction of 9–12% Cr steel at high temperature10.1016/j.ijmecsci.2017.01.018 ↗
5. Ratcheting-creep interaction of advanced 9–12% chromium ferrite steel with anelastic effect10.1016/j.ijfatigue.2011.04.009 ↗
6. Creep-ratcheting effect and lifetime prediction of advanced 9-12% Cr ferritic steel at 600 ℃10.1016/j.ijfatigue.2022.107245 ↗
7. Anelastic relaxation controlled cyclic creep and cyclic stress rupture behavior of an oxide dispersion strengthened alloy10.1007/BF02651621 ↗
8. The effect of cyclic loading on the creep fatigue life and creep strength of a DS superalloy: Damage mechanism and life modeling10.1016/j.ijfatigue.2019.105452 ↗
9. Observations of anelastic backflow following stress reductions during creep of pure metals10.1016/0001-6160(81)90010-9 ↗
10. In-situ and ex-situ microstructure studies and dislocation-based modelling for primary creep regeneration response of 316H stainless steel10.1016/j.actamat.2021.117130 ↗
11. Anelastic creep behaviour of RR-58 aluminum alloy at 180℃: Phenomenological aspects and analysis based on the unbowing of dislocation segments10.1016/j.msea.2005.08.055 ↗
12. Analysis of creep transients in pure metals following stress changes10.1016/0956-7151(95)00052-W ↗
13. Study of the mechanical properties of Mg-7.7at.% Al by in-situ neutron diffraction10.1080/01418619908210386 ↗
14. Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading–unloading10.1016/S1359-6454(03)00444-0 ↗
15. Anelastic behavior and phenomenological modeling of Mg ZEK100-O alloy sheet under cyclic tensile loading–unloading10.1016/j.msea.2012.11.009 ↗
16. Polysynthetic twinned TiAl single crystals for high-temperature applications10.1038/nmat4677 ↗
17. Simultaneous enhancement of strength and ductility in high Nb-TiAl by Si alloying10.1016/j.jmst.2023.09.008 ↗
18. Deformation and phase transformation behaviors of a high Nb-containing TiAl alloy compressed at intermediate temperatures10.1016/j.jmst.2021.06.041 ↗
19. Interaction between dynamic recrystallization and phase transformation of Ti-43Al-4Nb-1Mo-0.2B alloy during hot deformation10.1016/j.jmst.2024.05.084 ↗
20. Phase separation in hexagonal α phase during lamellar formation of TiAl alloys and its effect on subsequent phase transformations10.1016/j.jmst.2024.10.013 ↗
21. Influence of process conditions on the local solidification and microstructure during laser metal deposition of an intermetallic TiAl alloy (GE4822)10.1007/s11661-021-06139-2 ↗
22. TiAl alloys in commercial aircraft engines10.1080/09603409.2016.1183068 ↗
23. Microstructural evolution during annealing of a powder metallurgical TiAl–Nb composite and its effect on mechanical properties10.1016/j.jmrt.2023.06.186 ↗
24. Alloy design for aircraft engines10.1038/nmat4709 ↗
25. Low cycle fatigue, creep and creep-fatigue interaction behavior of a TiAl alloy at high temperatures10.1016/j.scriptamat.2017.09.016 ↗
26. Effect of dwell time on creep-fatigue life of a high-Nb TiAl alloy at 750℃10.1016/j.scriptamat.2015.07.018 ↗
27. Thermo-mechanical creep-fatigue damage evolution and life assessment of TiAl alloy10.1016/j.msea.2024.146806 ↗
28. Progress in research on hybrid metal matrix composites10.1016/j.jallcom.2020.155274 ↗
29. Ti–46Al–4Nb alloy refined and reinforced by in-situ TiC nanoparticles and TiB2 whiskers10.1016/j.jallcom.2021.162195 ↗
30. Microstructure and mechanical properties of hybrid in-situ Ti2AlCw/Mo2B5p reinforced TiAl alloy10.1016/j.msea.2021.142182 ↗
31. The effect of the in-situ hybrid Ti5Si3p/Ti2AlNw on the microstructure and mechanical properties of TiAl10.1016/j.matlet.2021.130678 ↗
32. Liang Z, Xiao S, Tian Y, Zheng Y, Xu L, Xue X, et al. Creep behavior and microstructure evolution of TiAl alloys synergistically micro-alloyed with C and Y2O3 at different temperatures. Trans Nonferrous Met Soc China 2024 (In press). http://kns.cnki.net/kcms/detail/43.1239.tg.20241022.1838.012.html.
33. Breaking the high-temperature strength-ductility trade-off in TiAl alloys through microstructural optimization10.1016/j.ijplas.2023.103756 ↗
34. Microstructure evolution and phase transformation of the mushy zone in a quenched β-solidifying TiAl alloy10.1016/j.jmst.2023.05.070 ↗
35. Advances in phase relationship for high Nb-containing TiAl alloys10.1007/s12598-015-0658-3 ↗
36. Twinning behavior and strengthening mechanism in a microalloyed TiAl alloy10.1016/j.msea.2023.144993 ↗
37. Enhanced high-temperature tensile property by gradient twin structure of duplex high-Nb-containing TiAl alloy10.1016/j.actamat.2018.09.007 ↗
38. Twin and twin intersection phenomena in a creep deformed microalloyed directionally solidified high Nb containing TiAl alloy10.1016/j.jmst.2022.02.045 ↗
39. Evading the strength-ductility trade-off at room temperature and achieving ultrahigh plasticity at 800℃ in a TiAl alloy10.1016/j.actamat.2021.117585 ↗
40. A simple model of uniaxial creep recovery and stress relaxation based on residual-stress redistribution10.1243/03093247V082099 ↗
41. High-temperature rotary-bending fatigue characteristics of a high Nb-containing beta-gamma TiAl alloy10.1016/j.msea.2018.08.021 ↗
42. The development of microstructural damage during high temperature creep–fatigue of a nickel alloy10.1016/j.ijfatigue.2012.07.016 ↗
43. Studies on creep-fatigue interaction behaviour of Alloy 617M10.1016/j.msea.2018.05.037 ↗
44. Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy10.1016/j.actamat.2018.10.017 ↗
45. A model for anelastic relaxation controlled cyclic creep10.1007/BF02811680 ↗
46. Creep in type 316 stainless steel10.1016/0001-6160(78)90142-6 ↗
47. Wu · 2019
48. The effect of nano-Y2O3 addition on tensile properties and creep behavior of as-cast TiAl alloy10.1016/j.jallcom.2020.153852 ↗
49. Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation10.1016/j.actamat.2015.04.055 ↗
50. Nucleation and thermal stability of carbide precipitates in high Nb containing TiAl alloys10.1016/j.intermet.2015.07.001 ↗