Fatigue crack propagation in a C70250 alloy
Source abstract
Abstract
Abstract The fatigue behavior of a C70250 alloy has been studied. The crack propagation behavior was investigated by performing fatigue crack propagation tests at load ratio R varying over the range 0.3–0.7. A considerable crack deflection and jagging was observed at low R-ratio. The study of the crack paths revealed that the closure effect is more relevant for R = 0.3. In this case the crack path is characterized by considerable peak heights and deflection angles and the closure effect is mainly related to the fracture surface mismatch. The main crack propagation micro-mechanisms observed are transgranular with few areas characterized by intergranular fracture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Ciufolini I. Dragging of Inertial Frames. Nature 2997; 449: 41-47. 10.1038/nature06071.10.1038/nature06071 ↗
2. A new laser-ranged satellite for General Relativity and Space Geodesy III. De Sitter effect and the LARES 2 space experiment10.1140/epjc/s10052-017-5339-y ↗
3. LARES: A New Laser-ranged satellite for fundamental physics and general relativity
4. A new laser-ranged satellite for General Relativity and Space Geodesy: I. Introduction to the LARES 2 space experiment10.1140/epjp/i2017-11635-1 ↗
5. Thoughness evaluation of LARES satellite tungsten alloy10.1016/j.proeng.2015.06.259 ↗
6. Fracture behaviour of alloys for a new laser ranged satellite10.1016/j.prostr.2018.06.026 ↗
7. Studies on the materials of LARES 2 satellite10.1007/s00190-019-01316-z ↗
8. Fatigue crack propagation mechanisms in C70250 and CuCrZr copper alloys10.1016/j.prostr.2020.06.042 ↗
9. Characterization of the hot-working behavior of a Cu-Ni-Si alloy10.1016/j.msea.2016.04.061 ↗
10. Effects of microstructure on mechanical properties of CuNiSi alloys10.1016/j.jallcom.2016.11.233 ↗
11. Orientation and diffraction patterns of δ-Ni2Si precipitates in Cu–Ni–Si alloy10.1016/j.jallcom.2012.12.154 ↗
12. Microstructure and mechanical properties of a high strength Cu-Ni-Si alloy treated by combined aging processes10.1016/j.jallcom.2016.11.137 ↗
13. Phase transformation behaviors and properties of a high strength Cu-Ni-Si alloy10.1016/j.msea.2017.05.001 ↗
14. Role of microstructure on initiation and propagation of fatigue cracks in precipitate strengthened Cu-Ni-Si alloy10.1016/j.ijfatigue.2016.01.004 ↗
15. Fatigue crack initiation and propagation behaviors of solution-treated and air-cooled Cu-6Ni-1.5Si alloy strengthened by precipitation hardening
16. Fatigue crack growth behaviour of precipitate-strengthened CuNi2Si alloy under different loading modes10.3390/ma13102228 ↗
17. Fatigue behavior of precipitation strengthened Cu–Ni–Si alloy modified by Cr and Zr addition10.1108/IJSI-11-2018-0080 ↗
18. Simultaneous increase in electrical conductivity and fatigue strength of Cu-Ni-Si alloy by utilizing discontinuous precipitates10.1016/j.matlet.2021.129353 ↗
19. Fatigue crack closure: a review of the physical phenomena10.1111/ffe.12578 ↗
20. Fatigue crack deflection and fracture surface contact: Micromechanical models10.1007/BF02816051 ↗
21. Influence of SiC particle distribution and prestraining on fatigue crack growth rates in aluminium AA 6061–SiC composite material10.1179/mst.1991.7.7.596 ↗
22. Crack initiation and growth during low-cycle fatigue of discontinuously reinforced metal-matrix composites10.1016/0142-1123(93)90483-7 ↗