Dynamic characteristics of compacted landfill waste material from cyclic triaxial tests
Source abstract
Abstract
This study conducted a series of cyclic and monotonic triaxial tests on reconstituted landfill waste material from a closed landfill site in Sydney, Australia, to assess its dynamic behaviour under various testing conditions. Specifically, the effects of cyclic deviatoric stress, loading frequency, and effective confining stress on the cumulative plastic axial strain, resilient modulus, and damping ratio under undrained cyclic loading conditions were investigated. Results indicated that the plastic deformation, resilient modulus, and material damping are significantly influenced by dynamic stress and confining stress, with a lesser impact from loading frequency. Notably, as the number of loading cycles increased, the cumulative plastic axial strain and resilient modulus exhibited an increase, whereas the damping ratio decreased. Furthermore, increasing cyclic deviatoric stress led to an increase in both cumulative plastic axial strain and damping ratio, while an increase in confining stress resulted in a decrease in these parameters. Conversely, the resilient modulus showed an increase with rising cyclic deviatoric stress and confining stress. The influence of loading frequency on cumulative plastic axial strain and resilient modulus was minor, and its effect on the damping ratio was rather negligible. The study observed that initial loading cycles caused rearrangement and reorientation of waste components and the mobilisation of fibres with tensile forces as loading progressed, suggesting that these landfill waste samples behaved comparably to fibrous soil with randomly distributed fibres. Through nonlinear regression analysis, an empirical relationship for cumulative plastic axial strain incorporating cyclic deviatoric stress, confining stress, number of cycles, and frequency was derived. This research contributes valuable insights into the behaviour of compacted landfills as railway subgrades, providing a foundation for informed decision-making in the design of transport infrastructure over closed landfill sites.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Soil Stabilization · Geotechnical Engineering and Underground Structures · Geotechnical Engineering and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. AusGov, Waste Management Facilities in Australia. 2017, Geoscience Australia: https://data.aurin.org.au/.
2. geotechnical stability of waste fills: Lessons learned and continuing challenges10.1061/(ASCE)GT.1943-5606.0002291 ↗
3. The problems associated with building on landfill sites10.1177/0734242X8700500161 ↗
4. Municipal solid waste landfills in lower- and middle-income countries: Environmental impacts, challenges and sustainable management practices10.1016/j.psep.2023.04.014 ↗
5. Physical, chemical, and engineering properties of landfill stabilized waste10.1002/ldr.2594 ↗
6. The idea of the recovery of municipal solid waste incineration (MSWI) residues in Kłodawa Salt Mine SA by filling the excavations with self-solidifying mixtures
7. Shear strength of municipal solid waste
8. Engineering properties of municipal solid waste10.1016/j.geotexmem.2004.11.002 ↗
9. Geotechnical properties of municipal solid waste10.1520/GTJ10324J ↗
10. Evaluation of MSW properties for seismic analysis
11. Shear displacement dependent strength of municipal solid waste and its major constituent10.1520/GTJ11135J ↗
12. Hydraulic properties of household waste and implications for landfills10.1680/gt.1999.370409 ↗
13. Geotechnical properties of fresh municipal solid waste at Orchard Hills Landfill, USA10.1016/j.wasman.2008.05.011 ↗
14. Mechanical properties of municipal solid waste10.1520/JTE11945 ↗
15. Zekkos, D., Evaluation of static and dynamic properties of municipal solid -waste, J.D. Bray, Editor. 2005, ProQuest Dissertations Publishing.
16. Geotechnics of waste fill
17. Geotechnical properties of a solid waste landfill: Muribeca’s case
18. Sanitary landfill of Santo Tirso-municipal waste physical, chemical and mechanical properties
19. Compressibility of a municipal solid waste landfill
20. Effects of stress history on compressibility characteristics of undisturbed landfill waste material10.1016/j.conbuildmat.2024.135725 ↗
21. Repeated load triaxial testing of a silty clay10.1680/geot.1975.25.1.95 ↗
22. Stress–strain response of soft clay to traffic loading10.1680/jgeot.15.P.224 ↗
23. Resilient modulus for fine-grained subgrade soils10.1061/(ASCE)0733-9410(1994)120:6(939) ↗
24. Cumulative plastic deformation for fine-grained subgrade soils10.1061/(ASCE)0733-9410(1996)122:12(1006) ↗
25. Structural test at the laboratory scale for the utilization of stabilized fine-grained soils in the subgrades of High Speed Rail infrastructures: Experimental aspects10.1016/j.ijfatigue.2015.09.005 ↗
26. Undrained deformation behavior of saturated soft clay under long-term cyclic loading
27. Jiang, M., et al., Effect of Cyclic Loading Frequency on Dynamic Properties of Marine Clay. 2010. p. 240-245.10.1061/41102(375)29 ↗
28. Experimental study on the stability of railroad silt subgrade with increasing train speed10.1061/(ASCE)GT.1943-5606.0000282 ↗
29. Stiffness and strength characteristics of demolition waste, glass and plastics in railway capping layers10.1016/j.sandf.2019.12.009 ↗
30. Fatigue and stiffness characteristics of asphalt mixtures made of recycled aggregates10.1016/j.ijfatigue.2023.107714 ↗
31. Dynamic properties of solid waste based on back-analysis of oii landfill10.1061/(ASCE)1090-0241(1998)124:3(211) ↗
32. Lee · 2007
33. In-situ assessment of the dynamic properties of municipal solid waste at a landfill in texas10.1016/j.soildyn.2014.04.004 ↗
34. Compositional effects on the dynamic properties of municipal solid waste10.1016/j.wasman.2011.07.009 ↗
35. Shear modulus and material damping of municipal solid waste based on large-scale cyclic triaxial testing10.1139/T07-069 ↗
36. Evaluating the dynamic characteristics of municipal solid waste for geotechnical purpose
37. Effect of confining stress and loading frequency on dynamic behavior of municipal solid waste in Kahrizak landfill10.1007/s13762-017-1465-1 ↗
38. Cyclic shear tests of municipal waste in large triaxial device for identification of its dynamic properties
39. ASTM-D2216-19, Standard test methods for laboratory determination of water (moisture) content of soil and rock by mass. D2216-10). ASTM International, West Conshohocken, PA. doi, 2019. 10.
40. ASTM-D2974-20e1. Standard test methods for determining the water (moisture) content, ash content, and organic material of peat and other organic soils. 2020. ASTM West Conshohocken, PA.
41. ASTM-D698, Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3)). 2012.
42. Cyclic shear strength of soft railroad subgrade10.1061/(ASCE)1090-0241(2000)126:2(139) ↗
43. Influences of train speed on permanent deformation of saturated soft soil under partial drainage conditions10.1016/j.soildyn.2020.106120 ↗
44. Effects of principal stress rotation on permanent deformation in rail track foundations10.1061/(ASCE)1090-0241(2009)135:4(555) ↗
45. Dynamic analysis of railway track response subjected to train moving loads using finite element simulation
46. Behaviour of saturated railway track foundation materials during undrained cyclic loading10.1139/cgj-2017-0196 ↗
47. Stress changes in the ground below ballasted railway track during train passage10.1243/0954409JRRT95 ↗
48. Selig · 2007
49. Numerical estimation of stresses in railway axles using a train–track interaction model10.1016/j.ijfatigue.2012.07.006 ↗
50. Evaluation of fiber-reinforced and cement-stabilized rammed-earth composite under cyclic loading10.1016/j.conbuildmat.2021.123746 ↗
51. Effect of cyclic loading frequency on the behavior of a stabilized sand reinforced with polypropylene and sisal fibers
52. Oliveira, P.J.V., A.A.S. Correia, and J.C.A. Cajada, Effect of the type of soil on the cyclic behaviour of chemically stabilised soils unreinforced and reinforced with polypropylene fibres. Soil dynamics and earthquake engineering (1984), 2018. 115(C): p. 336-343 Doi: 10.1016/j.soildyn.2018.09.005.10.1016/j.soildyn.2018.09.005 ↗
53. Resilient and plastic strain behavior of freezing-thawing mucky clay under subway loading in Shanghai10.1007/s11069-014-1036-4 ↗
54. Behavior of amorphous peaty soil under long-term cyclic loading10.1061/(ASCE)GM.1943-5622.0001254 ↗
55. Dynamic deformation characteristics of frozen clay under pure principal stress rotation10.1007/s12517-022-09572-8 ↗
56. Permanent deformation characteristics of subgrade soils due to repeated loading
57. Numerical methods for large-scale nonlinear optimization10.1017/S0962492904000248 ↗
58. Long-term dynamic behavior of a sandy subgrade reinforced by Waste Tire Textile Fibers (WTTFs)10.1016/j.trgeo.2020.100375 ↗
59. Cyclic and postcyclic triaxial testing of ballast and subballast10.1061/(ASCE)MT.1943-5533.0001523 ↗
60. Effect of rubber crumbs on the cyclic behavior of steel furnace slag and coal wash mixtures10.1061/(ASCE)GT.1943-5606.0001827 ↗
61. Parametric study on dynamic characterization of municipal solid waste fine fractions for geotechnical purpose10.1061/(ASCE)HZ.2153-5515.0000659 ↗
62. ASTM-D3999, D3999 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus. 2011.