Cyclic plasticity behavior and deformation mechanism of 1Cr18Ni10Ti pressure pipe subjected to in-service loadings
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Shi · 2012
2. Sealing failure and fretting fatigue behavior of fittings induced by pipeline vibration10.1016/j.ijfatigue.2020.105602 ↗
3. Dynamic analysis of an L-shaped liquid-filled pipe with interval uncertainty10.1016/j.ijmecsci.2021.107040 ↗
4. A dynamic modeling approach for nonlinear vibration analysis of the L-type pipeline system with clamps10.1016/j.cja.2020.04.007 ↗
5. The analysis and estimation of vibration fatigue for pipe fitting in aviation hydraulic system10.1016/j.engfailanal.2019.07.038 ↗
6. Axial and hoop ratcheting assessment in pressurized steel elbow pipes subjected to bending cycles10.1016/j.tws.2017.11.021 ↗
7. Fatigue ratcheting studies on TP304 LN stainless steel straight pipes10.1016/j.proeng.2010.03.237 ↗
8. Ratcheting behavior of pressurized-bending elbow pipe after thermal aging10.1016/j.ijpvp.2018.12.007 ↗
9. Microstructure-sensitive fatigue crack nucleation in a polycrystalline Ni superalloy10.1016/j.ijfatigue.2016.04.013 ↗
10. A critical review of experimental aspects in ratcheting fatigue: microstructure to specimen to component10.1016/j.jmrt.2019.06.014 ↗
11. Response and cyclic strain accumulation of pressurized piping elbows under dynamic out-of-plane bending10.1243/03093247V312153 ↗
12. Recent progresses in experimental investigation and finite element analysis of ratcheting in pressurized piping10.1016/j.ijpvp.2012.10.008 ↗
13. Simplified Theory of Plastic Zones in the state of elastic shakedown with stress stiffening10.1016/j.euromechsol.2022.104613 ↗
14. Dislocation structure evolution in 304L stainless steel and weld joint during cyclic plastic deformation10.1016/j.msea.2017.02.090 ↗
15. Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses10.1016/j.actamat.2004.03.011 ↗
16. Microscopic analysis of the influence of ratcheting on the evolution of dislocation structures observed in AISI 316L stainless steel during low cycle fatigue10.1016/j.msea.2013.08.041 ↗
17. Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients10.1016/j.actamat.2004.12.031 ↗
18. Prediction of composite microstructure stress-strain curves using convolutional neural networks
19. Ratcheting deformation and fatigue of surface treated ZK60 magnesium alloy10.1016/j.ijfatigue.2021.106691 ↗
20. The effect of stress amplitude on ratcheting strain development in an extruded AZ31B magnesium alloy under different mean stresses10.1016/j.msea.2022.144226 ↗
21. Morrow J. Cyclic plastic strain energy and fatigue of metals. Internal friction, damping, and cyclic plasticity: ASTM International; 1965.
22. Cyclic deformation behavior of metastable austenitic stainless steel AISI 347 in the VHCF regime at ambient temperature and 300 C10.1016/j.ijfatigue.2021.106632 ↗
23. A new approach to low-cycle fatigue damage based on exhaustion of static toughness and dissipation of cyclic plastic strain energy during fatigue10.1016/S0142-1123(01)00027-5 ↗
24. Energy field intensity approach for notch fatigue analysis10.1016/j.ijfatigue.2019.06.010 ↗
25. Experimental study on earthquake-resilient prefabricated cross joints with L-shaped plates10.1016/j.engstruct.2019.01.067 ↗
26. Bending ratcheting tests of Z2CND18. 12 stainless steel10.1016/j.ijfatigue.2011.04.008 ↗
27. A numerical approach for predicting shakedown limit in ratcheting behavior of materials10.1016/j.matdes.2012.12.049 ↗
28. Ratcheting in pressurized pipes and equipment: a review on affecting parameters, modelling, safety codes, and challenges10.1111/ffe.12775 ↗
29. Uniaxial ratcheting behavior and molecular dynamics simulation evaluation of 316LN stainless steel10.1016/j.msea.2022.143535 ↗
30. Deformation Mechanism Investigation on Low Density 18Mn Steels under Different Solid Solution Treatments10.3390/met11091497 ↗
31. Effect of Solid Solution Treatment on the Microstructure and Properties of Fe-Mn-Al Light-weight Steel
32. The effect of solid solution treatment on the hardness and microstructure of 0.6% wt C-10.8% wt Mn-1.44% wt Cr austenitic manganese steel
33. Effects of auto-tempering on microstructure and mechanical properties in hot rolled plain C-Mn dual phase steels10.1016/j.msea.2016.04.038 ↗
34. Effect of heat treatment on microstructure and residual stress fields of a weld multilayer austenitic steel clad10.1016/j.jmatprotec.2015.03.004 ↗
35. Cyclic deformation behavior and failure mechanism of S32205 duplex stainless steel under torsional fatigue loadings10.1016/j.msea.2020.139443 ↗
36. Fatigue failure mechanism and life prediction of a cast duplex stainless steel after thermal aging10.1016/j.ijfatigue.2021.106161 ↗
37. EBSD based studies on various modes of cyclic deformation at 923 K in a type 316LN stainless steel10.1016/j.msea.2018.02.101 ↗
38. The effect of plastic deformation of austenite on the kinetics of subsequent ferrite formation10.2355/isijinternational.41.1028 ↗
39. Coupled simulation of the influence of austenite deformation on the subsequent isothermal austenite–ferrite transformation10.1016/j.actamat.2005.10.055 ↗
40. An investigation into the reverse transformation of ferrite to austenite during friction stir processing of a duplex low-density steel10.1016/j.mtcomm.2023.106386 ↗
41. Shear-induced α→γ transformation in nanoscale Fe-C composite10.1016/j.actamat.2005.11.034 ↗
42. Fatigue-induced HCP-to-FCC phase transformation assisting crack nucleation of pure zirconium in high cycle fatigue regime10.1016/j.msea.2023.145404 ↗
43. The relative grain boundary area and energy distributions in a ferritic steel determined from three-dimensional electron backscatter diffraction maps10.1016/j.actamat.2012.11.017 ↗
44. Ultrafine ferrite formation through isothermal static phase transformation10.1016/j.actamat.2011.03.043 ↗
45. The austenite to polygonal ferrite transformation in low-alloy steel: multi-phase-field simulation10.1016/j.jmrt.2023.05.192 ↗
46. Austenite grain growth and the surface quality of continuously cast steel10.1007/s11663-013-9844-6 ↗
47. The origin of jerky dislocation motion in high-entropy alloys10.1038/s41467-022-32134-1 ↗
48. Effects of yttrium addition on grain boundary character distribution and stacking fault probabilities of 90Cu10Ni alloy10.1016/j.matchar.2019.02.040 ↗
49. Microstructure and deformation behavior of metastable duplex stainless steel at high rolling reductions10.1016/j.msea.2017.06.022 ↗
50. On the unified view of the contribution of plastic strain to cyclic crack initiation: Impact of the progressive transformation of shear bands to persistent slip bands10.1016/j.actamat.2014.11.020 ↗
51. Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: Part II10.1007/BF02644428 ↗
52. Dislocation structure evolution and its effects on cyclic deformation response of AISI 316L stainless steel10.1016/j.msea.2011.01.015 ↗
53. Dislocation network in additive manufactured steel breaks strength–ductility trade-off10.1016/j.mattod.2017.11.004 ↗
54. Dislocation evolution in 316L stainless steel subjected to uniaxial ratchetting deformation10.1016/j.msea.2010.06.020 ↗
55. Fatigue-induced microstructure evolution and ratcheting behavior of ultrafine-grained (UFG) pure aluminum processed by accumulative roll bonding (ARB)10.1016/j.matchar.2022.112578 ↗
56. Enhanced strengthening and hardening via self-stabilized dislocation network in additively manufactured metals10.1016/j.mattod.2021.06.002 ↗
57. On the role of dislocation characters influencing ratcheting deformation of austenitic stainless steel10.1016/j.msea.2016.02.076 ↗
58. The effects of Si on the mechanical twinning and strain hardening of Fe–18Mn–0.6 C twinning-induced plasticity steel10.1016/j.actamat.2013.02.031 ↗
59. On the composition of microtwins in a single crystal nickel-based superalloy10.1016/j.scriptamat.2016.08.029 ↗
60. Segregation engineering of grain boundaries of a metastable Fe-Mn-Co-Cr-Si high entropy alloy with laser-powder bed fusion additive manufacturing10.1016/j.actamat.2021.117271 ↗
61. Investigation of deformation twinning in a fine-grained and coarse-grained ZM20 Mg alloy: Combined in situ neutron diffraction and acoustic emission10.1016/j.actamat.2009.10.057 ↗
62. Orientation effects on acoustic emission during tensile deformation of hot rolled magnesium alloy AZ3110.1016/j.jallcom.2003.10.102 ↗
63. In-situ neutron diffraction and acoustic emission investigation of twinning activity in magnesium
64. Acoustic emission produced by deformation of metals and alloys-A review
65. Low-cycle fatigue of pressurized steel elbows under in-plane bending10.1115/1.4027316 ↗
66. Fatigue fracture expertise of train engine crankshafts10.1016/j.engfailanal.2011.02.007 ↗
67. A review on the fatigue performance of micro-arc oxidation coated Al alloys with micro-defects and residual stress10.1016/j.jmrt.2023.06.244 ↗