3D fatigue crack path deflection and residual stresses in 17-4PH stainless steel rod
Source abstract
Abstract
Damage tolerant structures require accurate fatigue crack growth rate models for life prediction. Central to these models are fracture mechanics similitude and empirically gathered growth rates. In this work, standard test methods failed to achieve similitude for 17-4PH stainless steel round-rod but succeeded for plate. Material product form differences are interrogated through constant ΔK tests, crack path analysis, residual stress (RS) characterization, and growth rate simulation. Analyses revealed that quench-induced RS in the round-rod promoted a non-planar, 3D crack path with closure effects. Strategies to mitigate the RS/path effects are evaluated by controlling constraint, closure, environment, and heat treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (98)
Show source-provided references
1. Stephens · 2001
2. Fatigue design rules for welded structures10.1002/(SICI)1528-2716(200001/03)2:1<102::AID-PSE12>3.0.CO;2-A ↗
3. New guidance for fatigue design of pipeline girth welds10.1016/S1350-6307(02)00051-1 ↗
4. An overview of fatigue in aircraft structures10.1111/ffe.12631 ↗
5. Fatigue crack growth and damage tolerance10.1111/ffe.12155 ↗
6. ASTM International. ASTM E647-15e1 Standard Test Method for Measurement of Fatigue Crack Growth Rates; 2015. 10.1520/E0647-15E01.
7. Anderson TL. Fracture mechanics: fundamentals and applications. CRC Press; 2005. 10.1201/9781420058215.10.1201/9781420058215 ↗
8. Gallagher J. MCIC-HB-01R Damage tolerant design handbook. A compilation of fracture and crack-growth data for high-strength alloys; 1983.
9. A review of fatigue crack growth resistance in the short crack growth regime10.1016/j.msea.2019.03.102 ↗
10. Crack growth: Does microstructure play a role?10.1016/j.engfracmech.2017.11.023 ↗
11. Load interaction effects during fatigue crack growth under variable amplitude loading — a literature review. Part I: empirical trends10.1046/j.1460-2695.1998.00083.x ↗
12. Fatigue crack growth rates of X100 steel welds in high pressure gas considering residual stress effects10.1016/j.engfracmech.2018.02.030 ↗
13. Fatigue crack growth rates in high pressure hydrogen gas for multiple X100 pipeline welds accounting for crack location and residual stress10.1016/j.engfracmech.2019.106846 ↗
14. A 50-year retrospective review of three-dimensional effects at cracks and sharp notches10.1111/ffe.12074 ↗
15. Classification of environmentally assisted fatigue crack growth behavior10.1016/j.ijfatigue.2009.03.019 ↗
16. Fatigue crack closure: a review of the physical phenomena10.1111/ffe.12578 ↗
17. James LA. Fatigue crack propagation in alloy 718: a review. In: Loria EA, editor. Superalloy 718-metallurgy and applications (MM&MS, 1989). p. 599–15.10.7449/1989/Superalloys_1989_499_515 ↗
18. James LA. The effect of temperature on the fatigue-crack propagation behavior of A-286 steel; 1976. 10.2172/4059538.10.2172/4059538 ↗
19. Effect of microstructure on the fatigue of hot-rolled and cold-drawn NiTi shape memory alloys10.1016/j.msea.2007.11.033 ↗
20. Kaufman JG. Properties of aluminum alloys: fatigue data and effects of temperature, product form, and processing. ASM International; 2008.
21. A comparison of fatigue-crack propagation behavior in sheet and plate aluminum-lithium alloys10.1016/0921-5093(91)90705-R ↗
22. Effect of wrought product thickness and stress ratio on fatigue crack growth behavior of a quaternary aluminium-lithium alloy10.1115/1.2812392 ↗
23. Fatigue crack growth rate measurements in aluminum alloy forgings: effects of residual stress and grain flow
24. Alpsten GA. Thermal residual stresses in hot-rolled steel members; 1968.
25. 50th anniversary article: The origin and management of residual stress in heat-treatable aluminium alloys10.1111/str.12091 ↗
26. Characterization and modeling of quenching-induced residual stresses in the nickel-based superalloy IN71810.1007/s11661-004-0079-7 ↗
27. Residual stresses in steel members: a review of available analytical expressions10.1108/IJSI-12-2014-0070 ↗
28. The influence of residual stress on fatigue crack growth rates of additively manufactured Type 304L stainless steel10.1016/j.ijfatigue.2022.106954 ↗
29. Influence of residual stress redistribution on fatigue crack growth and damage tolerant design10.4028/www.scientific.net/MSF.524-525.363 ↗
30. Fatigue crack growth in residual stress fields of laser shock peened Ti6Al4V titanium alloy10.1016/j.jallcom.2021.161427 ↗
31. Fatigue crack growth in residual stress fields: experimental results and modeling10.1111/j.1460-2695.1994.tb00786.x ↗
32. The influence of crack face contact on the prediction of fatigue crack propagation in residual stress fields10.1016/j.engfracmech.2011.12.008 ↗
33. Crack paths in a friction stir-welded pad-up for fuselage applications10.2514/1.C032016 ↗
34. Fatigue crack propagation in threshold regime under residual stresses10.1016/j.ijfatigue.2009.12.006 ↗
35. Gallagher JP, Giessler FJ, Berens AP, Engle RM. AFWAL-TR-82-3073 USAF damage tolerant design handbook: guidelines for the analysis and design of damage tolerant aircraft structures; 1984.
36. On a kinked crack model to describe the influence of material microstructure on fatigue crack growth10.3221/IGF-ESIS.25.14 ↗
37. Predictive Crack Growth Technique for Laser Peening Process Development10.1049/joe.2015.0110 ↗
38. Numerical simulation of fracture mode transition in ductile plates10.1016/j.ijsolstr.2008.11.009 ↗
39. Prediction of crack shape in a cylindrical bar under combined fatigue tension and torsion loading10.1016/j.tafmec.2020.102727 ↗
40. Fatigue crack deflection and fracture surface contact: Micromechanical models10.1007/BF02816051 ↗
41. Fatigue crack growth rate and stress-intensity factor corrections for out-of-plane crack growth
42. Safe life and damage tolerance aspects of railway axles - a review10.1016/j.engfracmech.2012.09.029 ↗
43. Effects of side-groove and loading rate on the fracture properties of aluminium alloy AL-606110.1002/mawe.201900262 ↗
44. ASTM International. ASTM A693-16 Standard specification for precipitation-hardening stainless and heat-resisting steel plate, sheet, and strip; 2016.
45. ASTM International. ASTM E8/E8M-16a standard test methods for tension testing of metallic materials; 2016. 10.1520/E0008_E0008M-16A.
46. ASTM International. ASTM E384-17 Standard test method for microindentation hardness of materials; 2017.
47. ASTM International. ASTM E140-12b Standard hardness conversion tables for metals relationship among brinell hardness, vickers hardness, rockwell hardness, superficial hardness, knoop hardness, scleroscope hardness, and leeb hardness; 2019.
48. Texture analysis with MTEX - free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
49. Nyyssönen T, Peura, P. & Kuokkala, V. T. Crystallography, Morphology, and Martensite Transformation of Prior Austenite in Intercritically Annealed High-Aluminum Steel. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 49, 6426–6441 (2018).10.1007/s11661-018-4904-9 ↗
50. Direct Current Potential Difference Fatigue Crack Measurement Techniques
51. ASTM International. ASTM E399-19 standard test method for linear-elastic plane-strain fracture toughness K1c of metallic materials; 2019.
52. Tada H, Paris PC, Irwin GR. The stress analysis of cracks handbook, third ed. ASME; 2000. 10.1115/1.801535.10.1115/1.801535 ↗
53. Effect of side grooving on measurements of plane-strain fracture toughness
54. Full-range stress intensity factor solutions for clamped SENT specimens10.1016/j.ijpvp.2016.11.004 ↗
55. Calibrating the electric potential method for studying slow crack growth
56. ASME. ASME B46.1-2009: Surface texture (surface roughness, waviness, and lay); 2009.
57. Hill MR. The slitting method. In: Schajer GS, editor. Practical Residual Stress Measurement Methods. John Wiley & Sons; 2013.10.1002/9781118402832.ch4 ↗
58. Residual stress measurement by successive extension of a slot: the crack compliance method10.1115/1.3098926 ↗
59. Experimental determination of stress intensity factors due to residual stresses10.1007/BF02317418 ↗
60. Use of inverse solutions for residual stress measurements10.1115/1.2204952 ↗
61. Schindler HJ, Bertschinger P. Some steps towards automation of the crack compliance method to measure residual stress distributions. In: Proc. 5th Int. Conf. Res. Stress. ICRS-5 1; 1997. p. 682–7.
62. Two-dimensional mapping of in-plane residual stress with slitting10.1007/s11340-017-0330-y ↗
63. Uncertainty, model error, and order selection for series-expanded, residual-stress inverse solutions10.1115/1.2172278 ↗
64. Forman RG, Mettua SR. (NASA-TM-102165) behavior of surface and corner cracks subjected to tensile and bending loads in Ti-6Al-4V alloy; 1990.
65. Beek JM. NASGRO Reference Manual, Version 9.1. NASA Johnson Space Center; 2019.
66. A crack opening stress equation for fatigue crack growth10.1007/BF00020751 ↗
67. Effects of aging on the microstructure of 17–4 PH stainless steel10.1016/0025-5416(88)90420-X ↗
68. ASTM International. ASTM A564/A564M-19a standard specification for hot-rolled and cold-finished age-hardening stainless steel bars and shapes; 2019.
69. Fatigue crack propagation in an ECAP-processed aluminium alloy - influence of shear plane orientation10.1002/mawe.201200008 ↗
70. Metallurgical analysis of a failed 17–4 PH stainless steel pyro bolt used in launch vehicle separation systems
71. Shear lips on fatigue fracture surfaces of aluminum alloys10.1111/j.1460-2695.2004.00837.x ↗
72. T-stress for crack paths in test specimens subject to mixed mode loading10.1016/j.engfracmech.2013.03.011 ↗
73. Effect of δ-ferrite on the stress corrosion cracking behavior of 321 stainless steel10.1016/j.corsci.2019.07.005 ↗
74. Effect of water vapor pressure on fatigue crack growth in Al-Zn-Cu-Mg over wide-range stress intensity factor loading10.1016/j.engfracmech.2014.11.009 ↗
75. Stress intensity factor equations for branched crack growth10.1016/j.engfracmech.2005.05.004 ↗
76. Mechanism of fatigue-crack propagation in ductile and brittle materials10.1023/A:1018655917051 ↗
77. Fatigue crack closure in residual stress bearing materials10.1520/JAI104071 ↗
78. On the stress distribution at the base of a stationary crack10.1115/1.4011454 ↗
79. A review of T-stress and its effects in fracture mechanics10.1016/j.engfracmech.2014.10.013 ↗
80. Inherent stress biaxiality in various fracture specimen geometries10.1007/BF00012486 ↗
81. Suresh S. Fatigue of materials. Cambridge University Press; 1998.10.1017/CBO9780511806575 ↗
82. Mechanical and metallurgical aspects of fracture behavior of an Al-alloy10.1007/BF00185195 ↗
83. Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization10.1016/j.engfracmech.2012.02.001 ↗
84. Stress intensity factor and T-stress solutions for three-dimensional clamped single edge notched tension (SENT) specimens10.1016/j.ijpvp.2018.08.006 ↗
85. On single-edge-crack tension specimens for tension-compression fatigue crack growth testing10.1016/j.engfracmech.2017.03.030 ↗
86. Petit · 2003 · 211
87. Aging reactions in precipitation hardenable stainless steel
88. Hot ductility of the 17–4 PH stainless steels10.1007/s11665-016-1895-9 ↗
89. Nitrogen effects in additively manufactured martensitic stainless steels: conventional thermal processing and comparison with wrought10.1007/s11661-020-05703-6 ↗
90. Ludwigson, D. C. & Hall, A. M. DMIC Report 111 The Physical Metallurgy of Precipitation-Hardenable Stainless Steels. (1959).
91. Selection of Wrought Precipitation-Hardening Stainless Steels
92. Fatigue-crack propagation in steels of various yield strengths10.1115/1.3428061 ↗
93. Thermal relaxation behavior of residual stress in laser hardened 17–4PH steel after shot peening treatment10.1016/j.apsusc.2011.06.032 ↗
94. Fatigue crack growth through a residual stress field introduced by plastic beam bending10.1111/j.1460-2695.2008.01274.x ↗
95. Koster WP, Field M, Fritz LJ, Gatto LR, Kahles JF. AFML-TR-70-11 surface integrity of machined structural components; 1970.
96. Prediction of the deflection and residual stress in controlled cooling of hot-rolled steel beams including load and arbitrary support Part II. Experimental validation and application10.1016/j.jmatprotec.2004.01.008 ↗
97. Critical assessment of the fatigue crack growth rate sensitivity to material microstructure in ferrite-pearlite steels in air and marine environment10.1016/j.msea.2019.03.093 ↗
98. Fatigue life and crack path predictions in generic 2D structural components10.1016/S0013-7944(02)00099-1 ↗