Fatigue behavior of polymethyl methacrylate/acrylonitrile butadiene styrene blends including blend composition, stress ratio, frequency, and holding pressure effects
Source abstract
Abstract
In engineering applications, polymer materials are expected to exhibit superior fatigue life and balanced mechanical properties as essential performance criteria. The blending method is an important alternative in improving the performance criteria of ABS polymer in service. Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectroscopy (FTIR), and Dynamic Mechanical Analysis (DMA) methods were used for characterization. The effects of the PMMA fraction on the mechanical and fatigue behavior of PMMA/ABS blends were investigated by tensile and fatigue tests. Also, the influence of blend composition, stress amplitudes, stress ratio, holding pressure, and loading frequency on fatigue life is considered. The study improved yield strength, tensile strength, and elongation at break values of blends compared to ABS. In addition, 115 % and 75 % improvements were achieved in fatigue cycles at high and low-stress amplitudes with blends, respectively, for tension/tension loading. Similar improvements were obtained for fully reverse loading at 218 %. Thus, it was determined that the PMMA/ABS blend exhibited superior fatigue life in both tension/ tension and fully reverse loading situations. Finally, it has been understood that PMMA/ABS blends can be designed to have mechanical properties and fatigue life behavior that can meet different requirements in conditions for engineering applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer crystallization and properties · Polymer Nanocomposites and Properties · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Utracki LA, Wilkie CA. Polymer blends handbook. 2014. doi: 10.1007/978-94-007-6064-6.10.1007/978-94-007-6064-6 ↗
2. Design of highly tough poly(l -lactide)-based ternary blends for automotive applications10.1002/app.43402 ↗
3. Additive manufacturing and characterization of high-temperature thermoplastic blends for potential aerospace applications
4. Chitosan-based blends for biomedical applications10.1016/j.ijbiomac.2021.05.003 ↗
5. Review of polyacrylonitrile blends and application in manufacturing technology: recycling and environmental impact10.1016/j.rineng.2020.100144 ↗
6. Biron M. Thermoplastics and Thermoplastic Composites: Second Edition. 2012. doi: 10.1016/C2011-0-05605-3.10.1016/B978-1-4557-7898-0.00006-8 ↗
7. Thermal, mechanical, and morphological properties of multicomponent blends based on acrylic and styrenic polymers10.1016/j.polymertesting.2019.106265 ↗
8. Utilization of poly(methyl methacrylate) rejection blended with acrylonitrile butadiene styrene resins and the effect on product properties10.20543/mkkp.v32i2.1256 ↗
9. Characterization and modeling of poly(methyl methacrylate) and thermoplastic polyurethane for the application in laminated setups10.1016/j.mechmat.2017.07.018 ↗
10. Miscible and immiscible blends of ABS with PMMA I. Morphology and rheology10.1002/app.1993.070470209 ↗
11. Recycling of automotive tail lamp assembly
12. Reinaldo JS, Pereira LM, Silva E dos S, Ueki MM, Ito EN. Effect of the chemical structure on the linear viscoelastic behavior of acrylic and styrenic polymer blends. Polym Test 2018;67:257–65. doi: 10.1016/j.polymertesting.2018.03.013.10.1016/j.polymertesting.2018.03.013 ↗
13. Preparation and characterization of PMMA-ABS Blend
14. Effect of processing parameters on the properties of two-component injection molded recycled polypropylene/ethylene propylene diene monomer automotive parts10.1007/s00170-023-11512-z ↗
15. The Influence of Processing Conditions on the Mechanical Properties of Poly(Acrylonitrile-Butadiene-Styrene)/Poly(Methyl Methacrylate) (ABS/PMMA) Blends10.1080/00222348.2023.2207897 ↗
16. Zhang A, Zhao G, Guan Y. Effects of Mold Cavity Temperature on Surface Quality and Mechanical Properties of Nanoparticle-Filled Polymer in Rapid Heat Cycle Molding 2015;41420:1–9. doi: 10.1002/app.41420.10.1002/app.41420 ↗
17. A novel gear fatigue monitoring indicator and its application to remaining useful life prediction for spur gear in intelligent manufacturing systems
18. A novel vibration indicator to monitor gear natural fatigue pitting propagation10.1177/14759217221142622 ↗
19. High cycle fatigue behavior and thermal properties of PLA/PCL blends produced by fused deposition modeling
20. Mechanical behavior of injection-molded polystyrene/polyethylene blends: fracture toughness vs. fatigue crack propagation10.1002/pen.11499 ↗
21. Microstructure-Based Fatigue Modeling of an Acrylonitrile Butadiene Styrene (ABS)
22. Mura · Investigation of Fatigue Behavior of ABS and PC-ABS · 2018 · 1
23. Handge UA, Galeski A, Kim SC, Dijkstra DJ, Go C, Gabriel C, et al. Melt Processing , Mechanical , and Fatigue Crack Propagation Properties of Reactively Compatibilized Blends of Polyamide 6 and Acrylonitrile – Butadiene – Styrene Copolymer n.d. doi: 10.1002/app.
24. The effect of ABS fraction on the fatigue behavior of PMMA/ABS polymer blends
25. Zhao N yang, Lian J yuan, Wang P fei, Xu Z bin. Recent progress in minimizing the warpage and shrinkage deformations by the optimization of process parameters in plastic injection molding: a review. Int J Adv Manuf Technol 2022;120:85–101. doi: 10.1007/s00170-022-08859-0.10.1007/s00170-022-08859-0 ↗
26. Thermomechanical characterization of short carbon fiber and short glass fiber-reinforced ABS used in large format additive manufacturing
27. Kinetics of thermal decomposition of PMMA at different heating rates and in a wide temperature range10.1016/j.tca.2018.10.019 ↗
28. Thermal characterization of recycled polymer for additive manufacturing applications10.1016/j.compositesb.2016.09.009 ↗
29. Miscibility and phase separation in SAN/PMMA blends investigated by positron lifetime measurements10.1016/j.eurpolymj.2006.05.007 ↗
30. Tsagkalias IS, Manios TK, Achilias DS. Effect of Graphene Oxide on the Reaction Kinetics of Methyl Methacrylate In Situ Radical Polymerization via the Bulk or Solution Technique 2017. doi: 10.3390/polym9090432.10.3390/polym9090432 ↗
31. Optical study on poly(methyl methacrylate)/poly(vinyl acetate) blends10.1155/2009/150389 ↗
32. Parameswaranpillai J, Joseph G, Sidhardhan SK, Jose S, Hameed N. Miscibility , UV resistance , thermal degradation , and mechanical properties of PMMA/SAN blends and their composites with MWCNTs 2016;43628:1–11. doi: 10.1002/app.43628.10.1002/app.43628 ↗
33. FTIR studies of PVC/PMMA blend based polymer electrolytes10.1016/j.saa.2006.06.012 ↗
34. Thermal behavior of vehicle plastic blends contained acrylonitrile-butadiene-styrene (ABS) in pyrolysis using TG-FTIR10.1016/j.wasman.2017.01.034 ↗
35. Fabrication of acrylonitrile-butadiene-styrene nanostructures with anodic alumina oxide templates, characterization and biofilm development test for Staphylococcus epidermidis10.1371/journal.pone.0135632 ↗
36. Materials with enhanced adhesive properties based on acrylonitrile-butadiene-styrene (ABS)/thermoplastic polyurethane (TPU) blends for fused filament fabrication (FFF)10.1016/j.matdes.2019.108044 ↗
37. FTIR analysis on aging characteristics of ABS/PC blend under UV-irradiation in air10.1016/j.saa.2017.04.075 ↗
38. Evaluation of chitosan flakes as adsorbent for palladium and platinum recovery from binary dilute solutions10.1504/IJGW.2014.061023 ↗
39. FT-IR examination of the development of secondary cell wall in cotton fibers10.3390/fib3010030 ↗
40. Hydrogen-bonding in polymer blends10.1007/s10965-008-9192-4 ↗
41. High-Performance Polymeric Materials through Hydrogen-Bond Cross-Linking
42. Insights into the Role of Hydrogen Bonds on the Mechanical Properties of Polymer Networks10.1021/acs.macromol.1c00120 ↗
43. Prediction of strain rate sensitivity of high density polyethylene using integral transform of dynamic mechanical analysis data10.1016/j.polymer.2016.08.053 ↗
44. Long-term stiffness prediction of particle filled polymers by dynamic mechanical analysis: Frequency sweep versus creep method10.1016/j.polymertesting.2021.107368 ↗
45. Effect of cycling frequency and self-heating on fatigue behavior of reinforced and unreinforced thermoplastic polymers10.1002/pen.24124 ↗
46. Temperature-dependent mechanical behaviour of PMMA: Experimental analysis and modelling10.1016/j.polymertesting.2016.12.016 ↗
47. The Influence of Blend Ratio on the Morphology, Mechanical, Thermal, and Rheological Properties of PP/LDPE Blends10.1002/mame.201600166 ↗
48. Effects of mean stress and stress concentration on fatigue behavior of short fiber reinforced polymer composites10.1111/ffe.12341 ↗
49. Effects of microstructural inclusions on fatigue life of polyether ether ketone (PEEK)10.1016/j.jmbbm.2015.07.020 ↗
50. Comparison of the fatigue behaviour of two different forms of PMMA10.1111/j.1460-2695.2009.01327.x ↗
51. Cyclic behavior and modeling of small fatigue cracks of a polycarbonate polymer10.1016/j.ijfatigue.2016.12.012 ↗
52. Crack initiation and propagation on CT specimens of two polymers (ABS and PMMA), under cyclic constant displacement loading10.1016/j.tafmec.2018.12.013 ↗
53. High-cycle bending fatigue properties of additive-manufactured ABS and PLA polymers fabricated by fused deposition modeling 3D-printing10.1016/j.finmec.2021.100016 ↗
54. Effects of melt temperature and hold pressure on the tensile and fatigue properties of an injection molded talc-filled polypropylene10.1002/pen.20301 ↗
55. Effect of packing pressure on stagnation weld-line strength for thermoplastic semicrystalline glass fiber reinforced material10.1177/08927057221142244 ↗
56. Fatigue Performance of Injection-Molded Short E-Glass Fiber Reinforced Polyamide-6, 6. II
57. Criticality of the self-heating effect in polymers and polymer matrix composites during fatigue, and their application in non-destructive testing
58. Fatigue and fracture of additively manufactured polyethylene terephthalate glycol and acrylonitrile butadiene styrene polymers10.1016/j.ijfatigue.2022.107212 ↗
59. Panin S V., Bogdanov AA, Eremin A V., Buslovich DG, Alexenko VO. Estimating Low-and High-Cyclic Fatigue of Polyimide-CF-PTFE Composite through Variation of Mechanical Hysteresis Loops. Materials (Basel) 2022;15. doi: 10.3390/ma15134656.10.3390/ma15134656 ↗
60. Fatigue behavior comparison of inter-ply and intra-ply hybrid flax-carbon fiber reinforced polymer matrix composites10.3390/jcs5070184 ↗