On fatigue behavior of short cracks subjected to compressive underloads
Source abstract
Abstract
This work explores the effects of underloads on physically short fatigue cracks propagating under near-threshold zero–tension loading in various constraint conditions. A finite element model is employed to model the transient behavior of plasticity-induced crack closure and residual stress, from which propagation behavior can be inferred. The expected behavior of acceleration after an underload is mostly descriptive of the plane stress results, but in axisymmetric and plane strain conditions a post-underload deceleration is predicted with single or scarce underloads. Frequently repeated underloads, however, are found to reduce fatigue strength in all cases considered. Short cracks prove especially vulnerable to underload acceleration when initiated at notch-like defects. Three independent physical mechanisms are recognized, namely, the removal of load history, compressive notch plasticity, and Bauschinger effect, a combination of which explains the underload results. Additionally, tentative guidance for fatigue design in finite and infinite life underload applications is provided.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Material Properties and Failure Mechanisms · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Fatigue crack closure under cyclic tension10.1016/0013-7944(70)90028-7 ↗
2. Fatigue crack closure: a review of the physical phenomena10.1111/ffe.12578 ↗
3. Spectrum loading and crack growth10.1115/1.3425362 ↗
4. Growth of surface fatigue cracks in a steel plate10.1016/0142-1123(81)90058-X ↗
5. Propagation of short fatigue cracks10.1179/imr.1984.29.1.445 ↗
6. Modelling and measurement of crack closure and crack growth following overloads and underloads10.1016/0013-7944(89)90101-X ↗
7. The nature of the two opening levels following an overload in fatigue crack growth10.1007/BF02646067 ↗
8. The effect of compressive underloads and tensile overloads on fatigue damage accumulation in SAE 1045 steel10.1016/0142-1123(90)90097-X ↗
9. Numerical simulation of fatigue crack growth under complex loading sequences10.1016/0013-7944(92)90221-Y ↗
10. Effects of compressive load excursions on fatigue crack growth10.1016/0142-1123(94)90104-X ↗
11. Fatigue crack growth acceleration or retardation due to compressive overload excursions
12. Effect of a single peak overload on physically short fatigue crack retardation in an axle-steel10.1111/j.1460-2695.1996.tb00959.x ↗
13. Analysis on short crack growth rate after single overload under cyclic bending moment
14. Effects of surface deformation and crack closure on fatigue crack propagation after overloading and underloading10.1016/j.ijfatigue.2004.03.017 ↗
15. Effect of underloads or overloads in fatigue crack growth by crack-tip blunting10.1016/j.engfracmech.2005.10.009 ↗
16. Fatigue crack propagation after overloading and underloading at negative stress ratios10.1016/j.ijfatigue.2007.03.012 ↗
17. The effect of material model in describing mechanism of plasticity-induced crack closure under variable cyclic loading10.1007/s10704-006-9048-z ↗
18. A study of fatigue crack growth of 7075-T651 aluminum alloy10.1016/j.ijfatigue.2007.09.006 ↗
19. Experimental measurement of crack opening and closure loads for 6082-T6 aluminium subjected to periodic single and block overloads and underloads10.1016/j.ijfatigue.2012.07.010 ↗
20. Wake length and loading history effects on crack closure of through-thickness long and short cracks in 304L: Part II – 3D numerical simulation10.1016/j.engfracmech.2013.01.014 ↗
21. Numerical modeling of fatigue crack propagation based on the theory of critical distances: Effects of overloads and underloads10.1016/j.engfracmech.2014.07.006 ↗
22. Elucidating the mechanism of fatigue crack acceleration following the occurrence of an underload
23. Synergy of crack closure, near-tip residual stress and crack-tip blunting in crack growth under periodic overloads – a fractographic study10.1016/j.ijfatigue.2016.08.004 ↗
24. Separating plasticity-induced closure and residual stress contributions to fatigue crack retardation following an overload10.1016/j.jmps.2016.10.001 ↗
25. Modelling of overload effects on fatigue crack initiation in case of carbon steel10.1111/ffe.12598 ↗
26. Effect of underloads on plasticity-induced crack closure: A numerical analysis10.1115/1.4042865 ↗
27. Literature review of fatigue assessment methods in residual stressed state10.1016/j.engfailanal.2020.104379 ↗
28. Near-tip strain evolution and crack closure of growing fatigue crack under a single tensile overload10.1016/j.ijfatigue.2020.105478 ↗
29. Fatigue crack growth prediction method for offshore platform based on digital twin10.1016/j.oceaneng.2021.110320 ↗
30. Effect of crack-tip deformation on fatigue crack growth: A comparative study under overload/underload conditions10.1016/j.tafmec.2022.103268 ↗
31. Fatigue crack growth acceleration in S355 steel under a single and periodic underload10.1016/j.ijfatigue.2022.106744 ↗
32. FGA formation mechanism for X10CrNiMoV12-2-2 and 34CrNiMo6 for constant and variable amplitude tests under the influence of applied mean loads10.1111/ffe.12797 ↗
33. Influence of small defects and nonmetallic inclusions on the high and very high cycle fatigue strength of an ultrahigh-strength steel10.1111/ffe.13534 ↗
34. The role of plasticity-induced crack closure in the non-propagation prediction of surface defect-initiated cracks near fatigue limit10.1016/j.ijfatigue.2022.107462 ↗
35. Plasticity-induced crack closure in the presence of loading irregularities in short cracks initiated at interior defects10.1016/j.prostr.2024.03.029 ↗
36. Fleck · 1985 · 13339
37. Finite element visualization of fatigue crack closure in plane stress and plane strain10.1007/BF00035167 ↗
38. Numerical modelling of three-dimensional fatigue crack closure: Mesh refinement10.1016/j.ijfatigue.2018.03.035 ↗
39. On the role of compression overloads in influencing crack closure and the threshold condition for fatigue crack growth in 7150 aluminum alloy10.1016/0013-7944(85)90157-2 ↗
40. Effects of mean stress and prestrain on fatigue-damage summation
41. Numerical simulation of plasticity induced crack closure: Identification and discussion of parameters10.1016/j.engfracmech.2007.12.009 ↗
42. Jaeger · 2007
43. Stress concentrations around voids in three dimensions: The roots of failure10.1016/j.jsg.2017.07.013 ↗
44. Defects as a root cause of fatigue failure of metallic components. I: Basic aspects10.1016/j.engfailanal.2019.01.055 ↗
45. 5 – effect of hardness HV on fatigue limits of materials containing defects, and fatigue limit prediction equations
46. Correlation of yield strength and tensile strength with hardness for steels10.1007/s11665-008-9225-5 ↗
47. 6 – effects of nonmetallic inclusions on fatigue strength
48. Effects of defects, inclusions and inhomogeneities on fatigue strength10.1016/0142-1123(94)90001-9 ↗
49. Small defects and inhomogeneities in fatigue strength: experiments, models and statistical implications10.1023/A:1009976418553 ↗
50. A numerical investigation of 3-D small-scale yielding fatigue crack growth10.1016/S0013-7944(03)00003-1 ↗
51. Finite element modeling of plasticity-induced crack closure with emphasis on geometry and mesh refinement effects10.1016/S0013-7944(02)00168-6 ↗
52. Strategy of plasticity induced crack closure numerical evaluation10.1016/j.tafmec.2019.04.004 ↗
53. On the finite element analysis of fatigue crack closure—1. basic modeling issues10.1016/0013-7944(89)90027-1 ↗
54. Mechanics of crack tip deformation and extension by fatigue
55. Some issues on finite element modelling of plasticity induced crack closure due to constant amplitude loading10.1016/j.ijfatigue.2008.01.013 ↗
56. A reexamination of plasticity-induced crack closure in fatigue crack propagation10.1016/j.ijplas.2004.11.005 ↗
57. A numerical study of fatigue crack closure induced by plasticity10.1111/j.1460-2695.2004.00738.x ↗
58. Finite element analysis of plasticity-induced crack closure under plane strain conditions10.1016/0013-7944(86)90258-4 ↗
59. Corrections in numerical methodology to evaluate plasticity induced crack closure along the thickness10.1016/j.tafmec.2018.08.004 ↗
60. Numerical modelling of plane strain plasticity induced crack closure effects for bimaterial interfacial cracks10.1016/j.ijfatigue.2015.03.001 ↗
61. A new methodology for computing crack opening values from finite element analyses10.1016/S0013-7944(03)00113-9 ↗
62. Numerical analysis of the influence of crack growth scheme on plasticity induced crack closure results
63. Finite-element analysis of fatigue crack closure under plane strain conditions: stabilization behaviour and mesh size effect10.1111/j.1460-2695.2005.00881.x ↗
64. On the accurate assessment of crack opening and closing stresses in plasticity-induced fatigue crack closure problems10.1016/j.engfracmech.2006.09.007 ↗
65. Effects of stress ratio and step loading on fatigue crack propagation rate
66. ASTM E647: standard test method for measurement of fatigue crack growth rates
67. Crack closure effects on fatigue crack propagation rates: Application of a proposed theoretical model10.1155/2016/3026745 ↗
68. Crack closure: A concept of fatigue crack growth under examination10.1111/j.1460-2695.1997.tb01508.x ↗
69. Modified NASGRO equation for physically short cracks10.1016/j.ijfatigue.2013.08.019 ↗
70. Oxide induced crack closure in the near threshold regime: The effect of oxide debris release10.1016/j.ijfatigue.2018.07.021 ↗
71. The cyclic R-curve – determination, problems, limitations and application10.1016/j.engfracmech.2017.09.032 ↗
72. Fatigue strength and fracture mechanics – a general perspective10.1016/j.engfracmech.2017.04.030 ↗
73. Fracture mechanics based assessment of the fatigue strength: approach for the determination of the initial crack size10.1111/ffe.12288 ↗
74. Effect of small defects on the fatigue strength of martensitic stainless steels10.1016/j.ijfatigue.2019.06.021 ↗
75. Effect of hardness and stress ratio on threshold stress intensity factor ranges for small cracks and long cracks in spheroidal cast irons10.1299/jmmp.1.667 ↗