A TCD-based statistical method to assess the impact of surface roughness and pores on the fatigue strength of LPBF Inconel 718 specimens
Source abstract
Abstract
The aim of this study is to model the impact of surface roughness and pores on the fatigue strength of plain and V-notched specimens made of Inconel 718 under as-built and machined conditions and produced by laser powder bed fusion (LPBF). Combining fractographic analyses with the Gumbel and the exponential distribution functions, the statistical analyses of the diameters of the pores and of their distances from the external surfaces were implemented. Surface roughness scans were performed with the optical profilometer . The finite element (FE) method was used to simulate a sample of pores generated by the identified probability distributions and the surface profiles obtained with the scans. The theory of critical distances (TCD) was implemented combining the blunt and sharp V-notched specimens in the machined condition, and it was combined with the Gumbel or the generalized extreme values distributions to calculate the fatigue strength concentration factors provided by the pores and the surface roughness at 99% of probability. Finally, the proposed model was used to predict the fatigue strength of the blunt V-notched specimens in the as-built conditions and of the plain specimens in the as-built and machined conditions resulting appreciably similar to the experimental data.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Fatigue and fracture mechanics · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. Review on powder-bed laser additive manufacturing of Inconel 718 parts
2. Alloy 718 for oilfield applications10.1007/s11837-012-0238-z ↗
3. A review on properties of Inconel 625 and Inconel 718 fabricated using direct energy deposition
4. Effect of internal defects on the fatigue behavior of additive manufactured metal components: a comparison between Ti6Al4V and Inconel 71810.3390/ma15196882 ↗
5. A review of mechanical properties of additively manufactured Inconel 718
6. RVE-based grading of truss lattice cores in sandwich panels10.1007/s00419-023-02432-1 ↗
7. Bioinspired airwings: Design and additive manufacturing of a geometrically graded microscale maple seed
8. Philpott · 2016 · 735
9. Review on machining of additively manufactured nickel and titanium alloys10.1016/j.jmrt.2021.09.088 ↗
10. Notch fatigue and crack growth resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: A critical distance approach to defect sensitivity10.1016/j.ijfatigue.2018.12.020 ↗
11. The effect of energy density on texture and mechanical anisotropy in selective laser melted Inconel 71810.1016/j.matdes.2020.108642 ↗
12. On selective laser melting of Inconel 718: Densification, surface roughness, and residual stresses10.1016/j.matdes.2020.108818 ↗
13. Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment10.1016/j.msea.2017.02.062 ↗
14. Mechanisms driving high-cycle fatigue life of as-built Inconel 718 processed by laser powder bed fusion10.1016/j.msea.2019.06.003 ↗
15. Microstructural porosity in additive manufacturing: The formation and detection of pores in metal parts fabricated by powder bed fusion10.1002/amp2.10021 ↗
16. Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion10.1016/j.ijfatigue.2019.105392 ↗
17. Effect of processing parameters on surface roughness, porosity and cracking of as-built IN738LC parts fabricated by laser powder bed fusion10.1016/j.jmatprotec.2020.116788 ↗
18. Intentionally seeding pores in additively manufactured alloy 718: Process parameters, microstructure, defects, and fatigue
19. As-built surface quality and fatigue resistance of Inconel 718 obtained by additive manufacturing
20. Modeling detrimental effects of high surface roughness on the fatigue behavior of additively manufactured Ti-6Al-4V alloys10.1016/j.ijfatigue.2020.106034 ↗
21. Surface roughness parameter and modeling for fatigue behavior of additive manufactured parts: A non-destructive data-driven approach
22. Defect-based fatigue model for additive manufacturing10.1007/s40964-022-00376-6 ↗
23. The Smith-Watson-Topper parameter and fracture surface topography relationship for additively manufactured 18Ni300 steel subjected to uniaxial variable-amplitude loading10.1016/j.tafmec.2024.104607 ↗
24. The theory of critical distances10.1016/j.engfracmech.2007.04.007 ↗
25. Taylor · 2007
26. A simplified approach to apply the theory of critical distances to notched components under torsional fatigue loading10.1016/j.ijfatigue.2005.07.035 ↗
27. The Theory of Critical Distances to estimate finite lifetime of notched components subjected to constant and variable amplitude torsional loading10.1016/j.engfracmech.2012.12.007 ↗
28. Mean stress and plasticity effect prediction on notch fatigue and crack growth threshold10.1111/ffe.12910 ↗
29. Mode III critical distance determination with optimized V-notched specimen under torsional fatigue and size effects on the inverse search probability distribution10.1016/j.ijfatigue.2021.106351 ↗
30. Using the smith-watson-topper parameter and its modifications to calculate the fatigue life of metals: the state-of-the-art10.3390/ma15103481 ↗
31. Torsional-loaded notched specimen fatigue strength prediction based on mode I and mode III critical distances and fracture surface investigations with a 3D optical profilometer10.1016/j.ijfatigue.2022.106913 ↗
32. Elastic–plastic analysis of high load ratio fatigue tests on a shot-peened quenched and tempered steel, combining the Chaboche model and the Theory of Critical Distances10.1016/j.ijfatigue.2023.107713 ↗
33. Multiaxial fatigue evaluation using discriminating strain paths10.1016/j.ijfatigue.2010.11.002 ↗
34. Multiaxial fatigue: An overview and some approximation models for life estimation10.1016/j.ijfatigue.2011.01.003 ↗
35. Multiaxial fatigue analysis of notched components using combined critical plane and critical distance approach10.1016/j.ijmecsci.2019.06.027 ↗
36. Microstructural size effect on the notch fatigue behavior of a Ni-based superalloy using crystal plasticity modelling approach10.1016/j.ijplas.2023.103857 ↗
37. On Tanaka-Mura’s fatigue crack nucleation model and validation10.1111/ffe.12736 ↗
38. Probabilistic notch fatigue assessment under size effect using micromechanics-based critical distance theory10.1016/j.ijfatigue.2024.108280 ↗
39. Determination of the fatigue critical distance according to the Line and the Point Methods with rounded V-notched specimen10.1016/j.ijfatigue.2017.10.002 ↗
40. Application of the Theory of Critical Distances to predict the effect of induced and process inherent defects for SLM Ti-6Al-4V in high cycle fatigue10.1016/j.cirp.2021.03.004 ↗
41. A unified approach to model the effect of porosity and high surface roughness on the fatigue properties of additively manufactured Ti6-Al4-V alloys
42. Murakami · 2019
43. Resonant fatigue tests on polished drill pipe specimens10.3390/machines12050314 ↗
44. Fracture mechanics for fatigue design of metallic components and small defect assessment10.1016/j.ijfatigue.2021.106550 ↗
45. Surface roughness effect on multiaxial fatigue behavior of additive manufactured metals and its modeling10.1016/j.tafmec.2019.102260 ↗
46. Productivity-oriented SLM process parameters effect on the fatigue strength of Inconel 71810.1016/j.ijfatigue.2022.107384 ↗
47. Fracture mechanics-based analysis of the fatigue limit of Ti6Al4V alloy specimens manufactured by SLM in as-built surface conditions by means of areal measurements10.1016/j.engfracmech.2023.109720 ↗
48. Newman · 1983 · 238
49. Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by additive manufacturing10.1016/j.prostr.2017.11.054 ↗
50. Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting10.1016/j.ijfatigue.2018.08.002 ↗
51. X-ray computed tomography for metal additive manufacturing: challenges and solutions for accuracy enhancement10.1016/j.procir.2018.04.050 ↗
52. Understanding internal defects in Mo fabricated by wire arc additive manufacturing through 3D computed tomography10.1016/j.jallcom.2020.155753 ↗
53. A statistical approach to determine data requirements for part porosity characterization in laser powder bed fusion additive manufacturing10.1016/j.matchar.2022.112027 ↗
54. A new energy based highly stressed volume concept to investigate the notch-pores interaction in thick-walled ductile cast iron subjected to uniaxial fatigue10.1016/j.ijfatigue.2022.107491 ↗
55. Enhancing plain fatigue strength in aluminum alloys through shot peening: Experimental investigations and a strain energy density interpretation10.1016/j.ijfatigue.2024.108299 ↗
56. Probabilistic modelling of notch fatigue and size effect of components using highly stressed volume approach10.1016/j.ijfatigue.2019.06.002 ↗
57. Defect tolerant fatigue assessment of AM materials: Size effect and probabilistic prospects10.1016/j.ijfatigue.2022.106884 ↗
58. Probabilistic and defect tolerant fatigue assessment of AM materials under size effect10.1016/j.engfracmech.2022.109000 ↗
59. Effect of bending-torsion on fracture and fatigue life for 18Ni300 steel specimens produced by SLM10.1016/j.mechmat.2023.104576 ↗
60. Fractographical quantitative analysis of EN-AW 2024 aluminum alloy after creep pre-strain and LCF loading
61. Fractographic-fractal dimension correlation with crack initiation and fatigue life for notched aluminium alloys under bending load10.1016/j.engfailanal.2023.107285 ↗
62. The correlation of fractal dimension to fracture surface slope for fatigue crack initiation analysis under bending-torsion loading in high-strength steels10.1016/j.measurement.2023.113169 ↗
63. Nicoletto G, Tinelli G, Lutey AHA, Romoli L. Influence of as-built surface topography on the fatigue behavior of SLM Inconel 718 : experiments and modeling. In: II international conference on simulation for additive manufacturing. 2019.
64. Technological implications of the Rosenthal solution for a moving point heat source in steady state on a semi-infinite solid10.1016/j.matdes.2022.110991 ↗
65. Modelling of the surface morphology and size effects on fatigue strength of L-PBF Inconel 718 by comparing different testing specimens10.1016/j.ijfatigue.2023.108120 ↗
66. Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy10.1016/j.msea.2015.06.021 ↗
67. Laser powder bed fusion of Inconel 718: residual stress analysis before and after heat treatment10.3390/met9121290 ↗
68. Microstructure and residual stress evolution of laser powder bed fused Inconel 718 under heat treatments10.1007/s11665-020-05338-z ↗
69. A current T-T-T diagram for wrought alloy 718
70. On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading10.1016/j.msea.2016.05.089 ↗
71. Microstructural characterization of laser metal powder deposited Alloy 71810.1016/j.matchar.2018.06.020 ↗
72. Comprehensive microstructural evaluation of precipitation in Inconel 71810.1007/s13632-018-00513-0 ↗
73. Effect of aging temperature on microstructure and tensile properties of Inconel 718 fabricated by selective laser melting10.1007/s12666-021-02487-0 ↗
74. Precipitation of δ phase in Inconel 718 superalloy: The role of grain boundary and plastic deformation
75. Pearson · Proc R Soc Lond · 1895 · 58 · 240
76. The proof and measurement of association between two things10.1093/ije/dyq191 ↗
77. A new measure of rank correlation10.1093/biomet/30.1-2.81 ↗
78. Defect sensitivity and fatigue design: Deterministic and probabilistic aspects in additively manufactured metallic materials10.1016/j.pmatsci.2024.101290 ↗
79. Accessing pore microstructure–property relationships for additively manufactured materials10.1002/gamm.202100012 ↗
80. Effect of hot isostatic pressing (HIP) on microstructure and mechanical properties of Ti6Al4V alloy fabricated by cold spray additive manufacturing
81. Fatigue crack propagation of short cracks10.1115/1.3443647 ↗
82. Experimental determination and sensitivity analysis of the fatigue critical distance obtained with rounded V-notched specimens10.1016/j.ijfatigue.2018.03.037 ↗
83. Juvinall · 2012
84. A novel formulation of the theory of critical distances to estimate lifetime of notched components in the medium-cycle fatigue regime10.1111/j.1460-2695.2007.01122.x ↗
85. A probabilistic average strain energy density approach to assess the fatigue strength of additively manufactured cellular lattice materials10.1016/j.ijfatigue.2023.107601 ↗
86. Effect of heat treatment temperature and turning residual stresses on the plain and notch fatigue strength of Ti-6Al-4V additively manufactured via laser powder bed fusion10.1016/j.ijfatigue.2022.107009 ↗
87. Multiaxial plain and notch fatigue strength of thick-walled ductile cast iron EN-GJS-600-3: Combining multiaxial fatigue criteria, theory of critical distances, and defect sensitivity10.1016/j.ijfatigue.2021.106703 ↗