Notch size influence on fatigue limit of steels pertinent to grain size
Source abstract
Abstract
Abstract Fatigue limit of notched specimens is influenced by notch geometries and material microstructure. In this paper, seven groups of fatigue measurements on different steels with average grain size (G) from 8 to 64 μm were analyzed, and an explicit model was proposed to describe notch geometry effect on fatigue limit and its relation to G. Additionally, normal distribution theory was incorporated to consider the inevitable scatter of fatigue limit caused by material heterogeneity and machining/measurement errors. The result shows that the proposed model can predict fatigue limits of both notched and cracked specimens of various steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Structural Load-Bearing Analysis · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Kitagawa H, Takahashi S. Applicability of fracture mechanics to very small cracks or the cracks in the early stage. 1976.
2. Building the Kitagawa-Takahashi diagram of flawed materials and components using an optimized V-notched cylindrical specimen10.1016/j.engfracmech.2019.106810 ↗
3. Application of modified Kitagawa-Takahashi diagram for fatigue strength assessment of cast Al-Si-Cu alloys10.1016/j.ijfatigue.2018.01.030 ↗
4. A mechanistic approach to the Kitagawa-Takahashi diagram using a multiaxial probabilistic framework10.1016/j.engfracmech.2013.06.001 ↗
5. A normalized equivalent initial flaw size model to predict fatigue behavior of metallic materials10.1016/j.engfracmech.2020.107256 ↗
6. Revealing the mechanism of critical root radius in notch fatigue limit based on crack closure concept10.1016/j.ijfatigue.2019.105261 ↗
7. Effect of notch acuity on the fracture behavior of AZ31 Mg alloy10.1016/j.engfracmech.2017.11.027 ↗
8. Fatigue limit: crack and notch sensitivity by Finite Fracture Mechanics10.1016/j.tafmec.2019.102407 ↗
9. Cracks and notches: analogies and differences of the relevant stress distributions and practical consequences in fatigue limit predictions10.1016/S0142-1123(00)00107-9 ↗
10. Notch sensitivity and defect sensitivity under fatigue loading: two sides of the same medal10.1023/A:1007686727207 ↗
11. A unifying approach to fatigue design in presence of defects and notches subject to uniaxial loading10.1051/matecconf/20141209001 ↗
12. Peterson · 1974
13. Fatigue limits for notches of arbitrary profile10.1016/j.ijfatigue.2012.10.004 ↗
14. The effects of notch size and material microstructure on the notch sensitivity factor for notched components10.1016/j.engfracmech.2015.03.026 ↗
15. The fatigue limit prediction of notched components – a critical review and modified stress gradient based approach10.1016/j.ijfatigue.2020.105531 ↗
16. Recent advances on notch effects in metal fatigue: a review10.1111/ffe.13195 ↗
17. Fatigue crack propagation behaviour derived from S-N data in very high cycle regime10.1046/j.1460-2695.2002.00547.x ↗
18. New pseudo stress correction method for estimating local strains at notch under multiaxial cyclic loading10.1016/j.ijfatigue.2017.06.010 ↗
19. Elastic-plastic stress-strain calculation at notch root under monotonic, uniaxial and multiaxial loadings10.1016/j.tafmec.2017.05.005 ↗
20. Geometrical effects in fatigue: a unifying theoretical model10.1016/S0142-1123(99)00007-9 ↗
21. A unifying approach to estimate the high-cycle fatigue strength of notched components subjected to both uniaxial and multiaxial cyclic loadings10.1111/j.1460-2695.2004.00759.x ↗
22. Study of component high cycle bending fatigue based on a new critical distance approach10.1016/j.engfailanal.2019.04.050 ↗
23. Effect of grain size on the very high cycle fatigue behavior and notch sensitivity of titanium10.1016/j.tafmec.2019.102362 ↗
24. Grain size effects on notch sensitivity10.1016/j.ijfatigue.2014.09.012 ↗
25. Effects of grain size on fatigue crack growth behaviors of nanocrystalline superelastic NiTi shape memory alloys10.1016/j.actamat.2020.05.008 ↗
26. Fracture mechanics and notch sensitivity10.1046/j.1460-2695.2003.00633.x ↗
27. Fatigue crack propagation of short cracks
28. Taylor · 2007
29. Prediction of ceramic fracture with normal distribution pertinent to grain size10.1016/j.actamat.2017.11.041 ↗
30. Probabilistic Prediction of strength and fracture toughness scatters for ceramics using normal distribution10.3390/ma12050727 ↗
31. Notch radius effect on fracture toughness of ceramics pertinent to grain size10.1016/j.jeurceramsoc.2020.03.030 ↗
32. A simplified Navarro-Rios model to predict fatigue limits in notched components10.1016/j.ijfatigue.2021.106264 ↗
33. Understanding cracked materials: is linear elastic fracture mechanics obsolete?10.1111/ffe.12183 ↗
34. A unified treatment of the mode I fatigue limit of components containing notches or defects10.1007/s10704-005-2183-0 ↗
35. Fatigue notch factor and short crack propagation10.1016/j.engfracmech.2007.07.005 ↗
36. Peterson’s stress concentration factors
37. Nisitani H, Endo M. Unified treatment of deep and shallow notches in rotating bending fatigue. In: Basic Questions in Fatigue, Vol. I, ASTM STP 924, PP. 136-153, 1988.10.1520/STP23214S ↗
38. An analysis of north-size effects at the fatigue limit10.1520/JTE11081J ↗
39. A Relation between the critical alternating propagation stress and crack length for mild steel10.1243/PIME_PROC_1959_173_065_02 ↗
40. Lukas P, Kunz L, Weiss B, Stickler R. Non-damaging notches in fatigue. 1986;9:195–204. https://doi.org/10.1111/j.1460-2695.1986.tb00446.x.10.1111/j.1460-2695.1986.tb00446.x ↗
41. Propagation and non-propagation of short fatigue cracks at a sharp notch10.1111/j.1460-2695.1983.tb00347.x ↗
42. Tensile deformation behaviors of pure nickel fine wire with a few grains across diameter10.1016/S1003-6326(16)64287-5 ↗
43. Zhang P, Zhu Q, Chen G, Qin H, Wang C. Grain size based low cycle fatigue life prediction model for nickel-based superalloy 2018;28:2102–6. https://doi.org/10.1016/S1003-6326(18)64854-X.10.1016/S1003-6326(18)64854-X ↗
44. Use of the squared ranks test to test for the equality of the coefficients of variation10.1080/03610919108812981 ↗
45. Sensitivity of probabilistic fracture mechanics analysis to variations in statistical parameters10.1016/j.tafmec.2007.08.004 ↗