Understanding of the fatigue crack nucleation in metallic sealing rings by explicitly incorporating the deformation history from manufacturing to service
Source abstract
Abstract
202309 bcch ; RGC ; Others ; Shenzhen Science and Technology Program; Hong Kong Scholar Program; National Natural Science Foundation of China; The Hong Kong Polytechnic University; GRF; National Science and Technology Major Project ; Published ; 24 months ; Green (AAM)
The source flagged this abstract for review. Check formulas and completeness against the original publication.
Source: openaire · Quality: needs review · Source record ↗
Source flags: short_text
Source flags: short_text
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical stress and fatigue analysis · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Microstructural and geometrical size effects on the fatigue of metallic materials10.1016/j.ijmecsci.2021.107058 ↗
2. The roles of rise and fall time in load shedding and strain partitioning under the dwell fatigue of titanium alloys with different microstructures10.1016/j.ijplas.2021.103161 ↗
3. Cyclic plasticity and thermomechanical alleviation in titanium alloys
4. The Structure Optimization Design for the W-Type Metallic Sealing Ring Based on the MOGA Algorithm10.4028/www.scientific.net/AMM.727-728.541 ↗
5. Wall thickness variation of a superalloy thin-walled w-section seal ring during roll forming
6. Enhanced fatigue resistance of Cu with a gradient nanograined surface layer10.1016/j.scriptamat.2013.01.031 ↗
7. Crystal plasticity modelling and HR-DIC measurement of slip activation and strain localization in single and oligo-crystal Ni alloys under fatigue10.1016/j.ijplas.2016.10.001 ↗
8. Experimental and computational studies of low cycle fatigue crack nucleation in a polycrystal10.1016/j.ijplas.2006.07.001 ↗
9. The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals10.1016/j.ijplas.2008.09.002 ↗
10. Experimental study of the impact of geometrical defects on the high cycle fatigue behavior of polycrystalline aluminium with different grain sizes10.1016/j.ijfatigue.2017.12.009 ↗
11. Taylor DD. Sealing ring with e-shaped radial section 1965.
12. Formability enhancement in hot spinning of titanium alloy thin-walled tube via prediction and control of ductile fracture10.1016/j.cja.2021.01.002 ↗
13. Deformation mode and wall thickness variation in conventional spinning of metal sheets10.1016/j.ijmachtools.2021.103846 ↗
14. A comparative study of three forms of an uncoupled damage model as fracture judgment for thin-walled metal sheets10.1016/j.tws.2021.108321 ↗
15. An anisotropic constitutive model for forming of aluminum tubes under both biaxial tension and pure shear stress states10.1016/j.ijplas.2022.103259 ↗
16. On the determination of forming limits in thin-walled tubes10.1016/j.ijmecsci.2019.03.020 ↗
17. Zhang H, Zhan M, Zheng Z, Li R, Lyu W, Lei Y. A Systematic Study on the Effects of Process Parameters on Spinning of Thin-Walled Curved Surface Parts With 2195 Al-Li Alloy Tailor Welded Blanks Produced by FSW. Front Mater 2021;8. 10.3389/fmats.2021.809018.10.3389/fmats.2021.809018 ↗
18. Failure Analysis and Optimized Verification of Metal W-sealing Ring of Aero-engine at High Temperature
19. External-internal composite spinning technology for forming thin-walled Ω-sectioned ring of superalloy10.1016/j.jmatprotec.2020.117004 ↗
20. A study on the sealing performance of metallic C-rings in reactor pressure vessel10.1016/j.nucengdes.2014.07.006 ↗
21. Deformation Characteristics and Sealing Performance of Metallic O-rings for a Reactor Pressure Vessel10.1016/j.net.2015.11.009 ↗
22. Stress and thickness calculation of a bolted flat cover with double metal sealing rings10.1007/s41365-018-0457-2 ↗
23. Parametric Analysis of Wave-shaped Metal Sealing Ring Based on Hierarchical Solution Method
24. A model for reliability assessment of sealing performance of the C-shaped metal sealing ring at the outlet of the subsea tubing hanger10.1016/j.oceaneng.2021.110311 ↗
25. Sealing Failure Analysis on V-Shaped Sealing Rings of an Inserted Sealing Tool Used for Multistage Fracturing Processes10.3390/en11061432 ↗
26. Analysis of Influence of Structures and Strength about Corrugated Radius of Metallic Sealing Ring10.4028/www.scientific.net/AMR.971-973.872 ↗
27. Mechanical behavior and sealing performance of metal sealing system in roller cone bits10.1007/s12206-019-0533-5 ↗
28. Rate sensitivity in discrete dislocation plasticity in hexagonal close-packed crystals10.1016/j.actamat.2016.01.035 ↗
29. Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: Application to cold-dwell fatigue in Ti alloys10.1016/j.ijplas.2006.10.013 ↗
30. Discrete dislocation, crystal plasticity and experimental studies of fatigue crack nucleation in single-crystal nickel
31. Microstructurally-sensitive fatigue crack nucleation in Ni-based single and oligo crystals10.1016/j.jmps.2017.05.012 ↗
32. Is stored energy density the primary meso-scale mechanistic driver for fatigue crack nucleation?10.1016/j.ijplas.2017.11.005 ↗
33. Crystal plasticity and high-resolution electron backscatter diffraction analysis of full-field polycrystal Ni superalloy strains and rotations under thermal loading10.1016/j.actamat.2014.07.036 ↗
34. Slip localization and fatigue crack nucleation near a non-metallic inclusion in polycrystalline nickel-based superalloy10.1016/j.msea.2015.06.070 ↗
35. Statistically Equivalent Representative Volume Elements for Unidirectional Composite Microstructures: Part I - Without Damage10.1177/0021998305055273 ↗
36. Statistically Equivalent Representative Volume Elements for Unidirectional Composite Microstructures: Part II - With Interfacial Debonding10.1177/0021998305055274 ↗
37. Microstructure and Property-Based Statistically Equivalent Representative Volume Elements for Polycrystalline Ni-Based Superalloys Containing Annealing Twins10.1007/s11661-018-4858-y ↗
38. Microstructure and property based statistically equivalent RVEs for polycrystalline-polyphase aluminum alloys10.1016/j.ijplas.2018.12.002 ↗
39. A microstructure-based porous crystal plasticity FE model for additively manufactured Ti-6Al-4V alloys10.1016/j.ijplas.2022.103254 ↗
40. A stored energy criterion for fatigue crack nucleation in polycrystals10.1016/j.ijfatigue.2014.06.001 ↗
41. On the Macroscopic Description of Stored Energy and Self Heating During Plastic Deformation10.1016/S0749-6419(97)00063-6 ↗
42. A microstructure-sensitive driving force for crack growth10.1016/j.jmps.2018.07.005 ↗
43. A mechanistic modelling methodology for microstructure-sensitive fatigue crack growth10.1016/j.jmps.2018.11.023 ↗
44. Microstructurally-sensitive fatigue crack growth in HCP, BCC and FCC polycrystals10.1016/j.jmps.2019.02.012 ↗
45. Microstructure-interacting short crack growth in blocky alpha Zircaloy-4
46. The dislocation configurational energy density in discrete dislocation plasticity10.1016/j.jmps.2019.04.015 ↗
47. He Y, Li Z. Personal communication 2021.10.1155/2021/5568351 ↗
48. The effect of strain rate asymmetry on the Bauschinger effect: A discrete dislocation plasticity analysis10.1016/j.jmrt.2021.12.107 ↗