Ply scale modelling of the quasi-static and fatigue behaviours of an acrylic-thermoplastic-matrix and glass-fibre-reinforced laminated composite covering the service temperature range of wind turbine blades
Source abstract
Abstract
Abstract In this study, a model formulated at the ply scale was considered to describe the mechanical behaviour of an acrylic-thermoplastic-matrix and glass-fibre-reinforced laminated composite under monotonic tensile and fatigue loadings within a temperature range of −20 °C to +60 °C. This study showed that the temperature dependency of the composite transverse and off-axis mechanical behaviour could be determined concisely, by considering only the temperature dependency of the matrix initial elastic properties and keeping the parameters of the damage evolution laws constant. This is a relevant result for designing composite structures with a limited set of experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Structure Analysis and Optimization · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Bathias · 2005
2. Fatigue resistance of continuous glass fiber/polypropylene composites: consolidation dependence10.1016/j.compscitech.2004.01.016 ↗
3. Mandell · 1992
4. Nijssen · 2007
5. Strength degradation during fatigue of unidirectional and cross-ply SCS-6/Ti-15-3 composites10.1016/S0142-1123(98)00068-1 ↗
6. Transverse matrix cracks in cross-ply laminates: Stress transfer, stiffness reduction and crack opening profiles10.1007/BF01184313 ↗
7. N. Revest, Comportement en fatigue de pièces épaisses en matériaux composites, PhD Thesis, Ecole nationale supérieure des Mines de Paris, 2011.
8. Fatigue damage accumulation and residual strength assessment of CFRP laminates10.1016/S0263-8223(03)00169-7 ↗
9. Effect of matrix damage on compressive strength in the fiber direction for laminated composites10.1016/j.compositesa.2016.12.012 ↗
10. A method to determine composite material residual tensile strength in the fibre direction as a function of the matrix damage state after fatigue loadings10.1016/j.compositesb.2017.06.021 ↗
11. Riande · 1999
12. Elevated temperature off-axis fatigue behavior of an eight-harness satin woven carbon-fiber/bismaleimide laminate10.1016/j.compositesa.2012.04.016 ↗
13. Effect of temperature on static and low velocity impact properties of thermoplastic composites10.1016/j.compositesb.2017.01.010 ↗
14. The effect of temperature on fatigue strength and cumulative fatigue damage of FRP composites10.1016/j.proeng.2010.03.216 ↗
15. Boissin · 2019
16. Effect of temperature on damage mechanisms and mechanical behaviour of an acrylic-thermoplastic-matrix and glass-fibre-reinforced composite10.1177/0021998320929056 ↗
17. Temperature effect on the mechanical properties and damage mechanisms of a glass/thermoplastic laminate10.1177/0021998319894383 ↗
18. A fracture behaviour evaluation of Glass/Elium150 thermoplastic laminate with the DCB test: Influence of loading rate and temperature10.1016/j.compstruct.2020.112907 ↗
19. EFFIWIND project: First 25m long wind blade manufactured using ELIUM resin, Plateforme Canoe EN. (2018). http://www.plateforme-canoe.com/en/effiwind-project-first-25m-long-wind-blade-manufactured-using-elium-resin/ (accessed April 15, 2020).
20. Debel CP. Identification of damage types in wind turbine blades tested to failure, in: Materialeopførsel Og Skadesanalyse, Dansk Metallurgisk Selskab, 2004: pp. 123–127. https://orbit.dtu.dk/en/publications/identification-of-damage-types-in-wind-turbine-blades-tested-to-f (accessed June 2, 2021).
21. Jørgensen ER, Borum KK, McGugan M, Thomsen CL, Jensen FM, Debel CP, Sørensen BF. Full scale testing of wind turbine blade to failure - flapwise loading, Risø National Laboratory, Denmark, 2004. https://orbit.dtu.dk/en/publications/full-scale-testing-of-wind-turbine-blade-to-failure-flapwise-load (accessed June 2, 2021).
22. Sørensen · 2004
23. Accelerated Full Scale Fatigue Testing Of A Small Composite Wind Turbine Blade Using A Mechanically Operated Test Rig
24. Structural health monitoring of wind turbine blades
25. Development of Fatigue Test System for Small Composite Wind Turbine Blades10.1016/j.proeng.2011.07.252 ↗
26. Wind Turbine Blade Fatigue Tests: Lessons Learned and Application to SHM System Development
27. CENER, International statistical analysis on wind turbine failures, in: 67th IEA Topical Expert Meeting, Kassel, Germany, 2011.
28. Failure analysis of wind turbine blade under critical wind loads10.1016/j.engfailanal.2012.08.002 ↗
29. Caithness Windfarm Information Forum 2021, Summary of Wind Turbine Accident, (n.d.). http://www.caithnesswindfarms.co.uk/AccidentStatistics.htm (accessed June 2, 2021).
30. IEC 61400-1 Wind turbines Part 1: Design requirements, 2005.
31. Germanischer Lloyd, Guideline for the Certification of Wind Turbines, Germanischer Lloyd, 2010.
32. Caous · 2017
33. Griffith DT, Ashwill TD. The Sandia 100-meter All-glass Baseline Wind Turbine Blade: SNL100-00, (n.d.) 67.
34. S.N. Laboratories, Sandia National Laboratories: News Releases: Enormous Blades Could Lead to More Offshore Energy in U.S., Power Electronics. (2016). https://www.powerelectronics.com/technologies/alternative-energy/article/21863279/enormous-blades-could-lead-to-more-offshore-energy-in-us (accessed June 2, 2021).
35. The Maritime Executive, World’s Longest Wind Turbine Blade Revealed, The Maritime Executive. (n.d.). https://www.maritime-executive.com/article/world-s-longest-wind-turbine-blade-revealed (accessed June 2, 2021).
36. Damage modelling of laminated carbon/epoxy composites under static and fatigue loadings10.1016/S0142-1123(01)00085-8 ↗
37. A generalized damage model for woven ply laminates under static and fatigue loading conditions10.1016/j.ijfatigue.2009.02.016 ↗
38. Damage modelling of the elementary ply for laminated composites10.1016/0266-3538(92)90097-M ↗
39. Rakotoarisoa C, Laurin F, Hirsekorn M, Maire J-F, Olivier L. Development of a fatigue model for 3D woven polymer matrix composites based on a damage model, in: 2012. https://www.scopus.com/inward/record.uri?eid=2-s2.0-84903954367&partnerID=40&md5=5ea652ae784b7cfe2a11e1c746b074ed.
40. A multiscale hybrid approach for damage and final failure predictions of composite structures10.1177/0021998312470151 ↗
41. Hybrid micromechanical-phenomenological modelling of anisotropic damage and anelasticity induced by micro-cracks in unidirectional composites10.1016/j.compstruct.2017.09.013 ↗
42. Computational micromechanics of the transverse and shear behavior of unidirectional fiber reinforced polymers including environmental effects10.1016/j.compositesa.2016.06.018 ↗
43. Numerical modeling on compressive behaviors of 3-D braided composites under high temperatures at microstructure level10.1016/j.compstruct.2016.10.130 ↗
44. 1 - Introduction to the fatigue life prediction of composite materials and structures: past, present and future prospects
45. Effect of temperature on damage mechanisms in an acrylic-matrix and glass-fibre-reinforced composite under monotonic tensile and fatigue loadings
46. On the tension–tension fatigue behaviour of a carbon reinforced thermoplastic part II: Evaluation of a dumbbell-shaped specimen10.1016/j.polymertesting.2011.05.005 ↗
47. A microscopic investigation of failure mechanisms in a triaxially braided polyimide composite at room and elevated temperatures10.1016/j.matdes.2013.08.003 ↗
48. Tsai · 1979
49. Payan J. Etude du comportement de composites stratifiés sous chargement statique et de fatigue, Aix-Marseille, 2004. \\Tsl-data\developpement\1-R&DInt\5-Endommagement\3-THESE\1c-Biblio\5-Theses\These_Payan_ComportementStratifiesStatiqueFatigue_2004.pdf.
50. A progressive first ply failure model for woven ply CFRP laminates under static and fatigue loads10.1016/j.ijfatigue.2006.02.024 ↗
51. S. Miot, Rupture de structures composites stratifiées sous chargement statique et de fatigue, PhD Thesis, Université Aix Marseille II, 2009.
52. Fatigue of laminated composite structures with stress concentrations10.1016/j.compositesb.2013.10.020 ↗
53. Modelling of the mechanical behaviour of woven-fabric CFRP laminates up to failure10.1016/S0266-3538(00)00199-8 ↗
54. Gay · 2014
55. Fatigue of composites for wind turbines10.1016/j.ijfatigue.2006.02.040 ↗
56. Investigation of Tension-Compression Fatigue Behavior of a Cross-Ply Metal Matrix Composite at Room and Elevated Temperatures, PhD Thesis
57. Fatigue behavior of a cross-ply titanium matrix composite under tension-tension and tension-compression cycling10.1016/0921-5093(95)07006-0 ↗
58. Tension-compression fatigue behavior of a unidirectional titanium-matrix composite at elevated temperature10.1016/S0266-3538(96)00113-3 ↗
59. Load ratio effects on fatigue response of titanium matrix composite at elevated temperature10.1016/S0142-1123(98)00059-0 ↗