The role of plasticity-induced crack closure in the non-propagation prediction of surface defect-initiated cracks near fatigue limit
Source abstract
Abstract
The purpose of present work is to deepen the understanding of crack propagation, non-propagation, and fatigue limit. Quantitative prediction of fatigue crack non-propagation in constant amplitude loading is attempted through extensive 3D elastic–plastic finite element analysis of near-threshold propagation of short cracks nucleating from surface defects. Level of plasticity-induced crack closure is used to estimate the effective stress intensity factor range, which is evaluated in terms of non-propagation potential. It is shown that plasticity-induced crack closure alone is adequate in producing a local minimum in the development of effective stress intensity factor range, which gives a prerequisite to crack arrest.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Fatigue crack closure under cyclic tension10.1016/0013-7944(70)90028-7 ↗
2. The significance of fatigue crack closure
3. A reexamination of plasticity-induced crack closure in fatigue crack propagation10.1016/j.ijplas.2004.11.005 ↗
4. Fatigue crack closure: a review of the physical phenomena10.1111/ffe.12578 ↗
5. 6 – effects of nonmetallic inclusions on fatigue strength
6. Effects of size on the fatigue limit and the branch point in rotary bending tests of carbon steel specimens10.1299/jsme1958.11.947 ↗
7. Prediction of non propagating cracks10.1016/0013-7944(79)90081-X ↗
8. Notch-size effects in fatigue based on surface strain redistribution and crack closure10.1016/0142-1123(92)90155-6 ↗
9. 3 – notch effect and size effect
10. The influence of interacting small defects on the fatigue limits of a pure iron and a bearing steel10.1016/j.ijfatigue.2020.105560 ↗
11. Numerical simulation of plasticity induced crack closure: Identification and discussion of parameters10.1016/j.engfracmech.2007.12.009 ↗
12. Finite element visualization of fatigue crack closure in plane stress and plane strain10.1007/BF00035167 ↗
13. A finite-element analysis of fatigue crack closure10.1520/STP33952S ↗
14. On the closure of fatigue cracks under cyclic tensile loading10.1007/BF00955089 ↗
15. On the finite element analysis of fatigue crack closure—1. Basic modeling issues10.1016/0013-7944(89)90027-1 ↗
16. On the finite element analysis of fatigue crack closure—2. Numerical results10.1016/0013-7944(89)90028-3 ↗
17. Modified NASGRO equation for physically short cracks10.1016/j.ijfatigue.2013.08.019 ↗
18. FGA formation mechanism for X10CrNiMoV12-2-2 and 34CrNiMo6 for constant and variable amplitude tests under the influence of applied mean loads10.1111/ffe.12797 ↗
19. Characteristic S–N properties of high-carbon–chromium-bearing steel under axial loading in long-life fatigue10.1046/j.1460-2695.2002.00574.x ↗
20. Numerical modelling of three-dimensional fatigue crack closure: Plastic wake simulation10.1016/j.ijfatigue.2019.105344 ↗
21. A numerical study of the effect of single overloads on plasticity induced crack closure10.1016/j.tafmec.2016.12.001 ↗
22. Numerical study of the thickness transition in bi-dimensional specimen cracks10.1016/j.ijfatigue.2011.02.006 ↗
23. Closure and growth of fatigue cracks at notches10.1115/1.2904135 ↗
24. The influence of crack length on fatigue crack growth in deep sharp notches10.1007/BF02648804 ↗
25. Crack opening and closure in fatigue10.1016/0013-7944(85)90021-9 ↗
26. 5 – effect of hardness HV on fatigue limits of materials containing defects, and fatigue limit prediction equations
27. Defects as a root cause of fatigue failure of metallic components. I: Basic aspects10.1016/j.engfailanal.2019.01.055 ↗
28. Quantitative evaluation of fatigue strength of metals containing various small defects or cracks10.1016/0013-7944(83)90018-8 ↗
29. 4 – effect of size and geometry of small defects on the fatigue limit
30. Asymmetric crack wake plasticity – a reason for roughness induced crack closure10.1016/j.actamat.2004.06.014 ↗
31. Effect of underload cycles on oxide-induced crack closure development in cr-mo low-alloy steel10.3390/ma14102530 ↗
32. Oxide induced crack closure in the near threshold regime: The effect of oxide debris release10.1016/j.ijfatigue.2018.07.021 ↗
33. Near-threshold fatigue crack-propagation – A perspective on the role of crack closure
34. Simulating the effect of grain boundaries on microstructurally small fatigue crack growth from a focused ion beam notch through a three-dimensional array of grains10.1016/j.actamat.2016.04.006 ↗
35. Correlation of yield strength and tensile strength with hardness for steels10.1007/s11665-008-9225-5 ↗
36. Mechanics of crack tip deformation and extension by fatigue
37. Determination of the most appropriate mesh size for a 2-D finite element analysis of fatigue crack closure behaviour10.1111/j.1460-2695.1997.tb00285.x ↗
38. A numerical investigation of 3-D small-scale yielding fatigue crack growth10.1016/S0013-7944(03)00003-1 ↗
39. Finite element modeling of plasticity-induced crack closure with emphasis on geometry and mesh refinement effects10.1016/S0013-7944(02)00168-6 ↗
40. Numerical modelling of three-dimensional fatigue crack closure: Mesh refinement10.1016/j.ijfatigue.2018.03.035 ↗
41. Strategy of plasticity induced crack closure numerical evaluation10.1016/j.tafmec.2019.04.004 ↗
42. A numerical study of fatigue crack closure induced by plasticity10.1111/j.1460-2695.2004.00738.x ↗
43. Finite element analysis of plasticity-induced crack closure under plane strain conditions10.1016/0013-7944(86)90258-4 ↗
44. Corrections in numerical methodology to evaluate plasticity induced crack closure along the thickness10.1016/j.tafmec.2018.08.004 ↗
45. Some issues on finite element modelling of plasticity induced crack closure due to constant amplitude loading10.1016/j.ijfatigue.2008.01.013 ↗
46. Numerical modelling of plane strain plasticity induced crack closure effects for bimaterial interfacial cracks10.1016/j.ijfatigue.2015.03.001 ↗
47. A new methodology for computing crack opening values from finite element analyses10.1016/S0013-7944(03)00113-9 ↗
48. Numerical analysis of the influence of crack growth scheme on plasticity induced crack closure results
49. Finite-element analysis of fatigue crack closure under plane strain conditions: stabilization behaviour and mesh size effect10.1111/j.1460-2695.2005.00881.x ↗
50. On the accurate assessment of crack opening and closing stresses in plasticity-induced fatigue crack closure problems10.1016/j.engfracmech.2006.09.007 ↗
51. Physically appropriate characterization of fatigue crack propagation rate in elastic–plastic materials using the J-integral concept10.1007/s10704-014-9983-z ↗
52. Out-of-phase thermomechanical fatigue crack propagation in a steam turbine steel — Modelling of crack closure10.1016/j.ijfatigue.2021.106251 ↗
53. Fatigue crack growth. Analysis and predictions
54. Recent advances in fatigue crack growth modeling
55. The influence of stress relieving and R-ratio on the fatigue of welding joints
56. Fatigue crack growth under random loading
57. Unraveling the myth of closure corrections: Sharpening the definition of opening and closure stresses with an energy approach10.1016/j.ijfatigue.2020.106016 ↗
58. 3D short fatigue crack closure behavior in Ti-6Al-4V alloy investigated using in-situ high resolution synchrotron X-ray tomography10.1016/j.engfracmech.2021.107755 ↗
59. Refinement of stress intensity factor estimates for a peripherally cracked spherical void and a hemispherical surface pit10.1111/j.1151-2916.1981.tb09533.x ↗
60. Stress intensity factor for a peripherally cracked spherical cap10.1111/j.1151-2916.1997.tb03142.x ↗
61. Influence of small defects and nonmetallic inclusions on the high and very high cycle fatigue strength of an ultrahigh-strength steel10.1111/ffe.13534 ↗
62. The effect of microstructure on very high cycle fatigue properties in Ti–6Al–4V10.1016/j.scriptamat.2010.02.043 ↗
63. The cyclic R-curve – determination, problems, limitations and application10.1016/j.engfracmech.2017.09.032 ↗
64. Fatigue crack growth and closure behaviour through a compressive residual stress field10.1111/j.1460-2695.1990.tb00572.x ↗
65. Effect of small defects on the fatigue strength of martensitic stainless steels10.1016/j.ijfatigue.2019.06.021 ↗
66. On thumb-nail pattern of fatigue crack front observed in standard compact tension specimen10.1007/BF00019769 ↗