Fatigue crack growth in bearing steel under cyclic mode II + static biaxial compression
Source abstract
Abstract
Mode II fatigue crack growth under reversed shear and static biaxial compression was investigated in two bearing steels. Many aborted branches, quasi-orthogonal to the main crack, were observed along the crack face. The compressive stress parallel to the main crack hindered the growth of these branches and favored coplanar mode II crack growth. The crack face sliding displacement profiles measured by DIC were used to derive $Δ\rm KII,eff$, at the main crack tip, using elastic-plastic FE simulations with crack face friction, by an inverse method. Friction corrected crack growth kinetics were obtained for mode II crack growth in both steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Fatigue and fracture mechanics · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Pitting due to rolling contact10.1115/1.4008607 ↗
2. Analysis of surface crack growth under rolling contact fatigue10.1016/j.ijfatigue.2007.11.002 ↗
3. A review of rolling contact fatigue10.1115/1.3209132 ↗
4. A pitting model for rolling contact fatigue10.1115/1.3254565 ↗
5. Evaluation of mixed-mode crack growth direction criteria under rolling contact conditions10.1016/j.wear.2020.203184 ↗
6. The mechanism of rolling contact fatigue: an update10.1243/135065005X9808 ↗
7. Voskamp A. Fatigue and Material Response in Rolling Contact. In: Hoo J, Green W, editors. Bearing Steels: Into the 21st Century, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International; 1998, p. 152-152–15. 10.1520/STP12126S.10.1520/STP12126S ↗
8. The effect of the changing microstructure on the fatigue behaviour during cyclic rolling contact loading
9. Propagation of surface initiated rolling contact fatigue cracks in bearing steel10.1016/j.ijfatigue.2016.12.004 ↗
10. Further understanding of rolling contact fatigue in rolling element bearings - a review10.1016/j.triboint.2019.105849 ↗
11. Fatigue crack growth simulation under cyclic non-proportional mixed mode loading10.1016/j.ijfatigue.2017.04.014 ↗
12. Review of fatigue crack growth under non-proportional mixed-mode loading10.1016/j.ijfatigue.2013.04.001 ↗
13. Fatigue crack growth under non-proportional mixed-mode loading in ferritic-pearlitic steel10.1111/j.1460-2695.2004.00817.x ↗
14. A review of fatigue crack growth in steels under Mode I and II loading10.1111/j.1460-2695.1992.tb00025.x ↗
15. Evaluation of crack growth direction criteria on mixed-mode fatigue crack growth experiments10.1016/j.ijfatigue.2019.04.013 ↗
16. When does a crack grow under mode II conditions?10.1007/BF00034020 ↗
17. Crack kinking from an initially closed crack10.1016/S0020-7683(98)00334-5 ↗
18. Effects of T-stresses on fracture initiation for a closed crack in compression with frictional crack faces10.1007/s10704-009-9397-5 ↗
19. Modelling adhesive wear extension in fretting interfaces: An advection-dispersion-reaction contact oxygenation approach10.1016/j.triboint.2020.106490 ↗
20. Bonniot T, Doquet V, Mai SH. Fatigue crack growth under non-proportional mixed-mode I + II. Role of compression while shearing. International Journal of Fatigue 2020;134:105513. 10.1016/j.ijfatigue.2020.105513.10.1016/j.ijfatigue.2020.105513 ↗
21. A test method for Mode II fatigue crack growth relating to a model for rolling contact fatigue10.1111/j.1460-2695.1996.tb00949.x ↗
22. Mode II fatigue crack growth as influenced by a compressive stress applied parallel to the crack path
23. Smith M, Smith R. Toward an understanding to mode II fatigue crack growth. Basic Questions in Fatigue: Volume I 1988;1.10.1520/STP23220S ↗
24. The preferred fatigue crack propagation mode in a M250 maraging steel loaded in shear10.1046/j.1460-2695.1999.00161.x ↗
25. A material and environment-dependent criterion for the prediction of fatigue crack paths in metallic structures10.1016/j.engfracmech.2007.07.004 ↗
26. On the Crack Extension in Plates Under Plane Loading and Transverse Shear10.1115/1.3656897 ↗
27. An energy release rate criterion for mixed mode fracture10.1007/BF00038891 ↗
28. Déviation infinitésimale d’une fissure dans une direction arbitraire
29. Experiments under pure shear and rolling contact fatigue conditions: Competition between tensile and shear mode crack growth10.1016/j.ijfatigue.2012.05.007 ↗
30. A predictive rolling contact fatigue crack growth model: onset of branching, direction, and growth—role of dry and lubricated conditions on crack patterns10.1115/1.1479698 ↗
31. Torsional fatigue of a medium carbon steel containing an initial small surface crack introduced by tension-compression fatigue: crack branching, non-propagation and fatigue limit10.1046/j.1460-2695.1998.00128.x ↗
32. Lenkovs’kyi TM. Determination of the Characteristics of Cyclic Crack Resistance of Steels Under Transverse Shear (A Survey). Mater Sci 2014;50:340–9. 10.1007/s11003-014-9725-4.10.1007/s11003-014-9725-4 ↗
33. Derivation of effective stress intensity factors from measured crack face displacements10.1016/j.engfracmech.2009.02.017 ↗
34. Determination of effective stress intensity factors under mixed-mode from digital image correlation fields in presence of contact stresses and plasticity10.1111/str.12332 ↗
35. Fatigue at notches subjected to reversed torsion and static axial loads10.1111/j.1460-2695.1985.tb00425.x ↗
36. Tschegg E, Stanzl S. The Significance of Sliding Mode Crack Closure on Mode III Fatigue Crack Growth. In: Fong J, Wei R, Fields R, Gangloff R, editors. Basic Questions in Fatigue: Volume I, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International; 1988, p. 214-214–9. 10.1520/STP23218S.10.1520/STP23218S ↗
37. Branch crack development from the flank of a fatigue crack propagating in mode II: Propagation of fatigue cracks in mode II10.1046/j.1460-2695.2001.00384.x ↗
38. Lemaitre J, Chaboche J-L. Mechanics of Solid Materials. 1st ed. Cambridge University Press; 1990. 10.1017/CBO9781139167970.10.1017/CBO9781139167970 ↗
39. Crack path tracking from full field measurements: a novel empirical methodology10.1111/str.12333 ↗
40. A new marching ridges algorithm for crack path tracking in regularized media10.1016/j.ijsolstr.2015.04.043 ↗
41. Evaluating mixed-mode stress intensity factors from full-field displacement fields obtained by optical methods10.1016/j.engfracmech.2006.08.004 ↗
42. Garaud J-D, Feld-Payet S, Bettonte F, Tireira A, Le Sant Y, Le Besnerais G, et al. escale : plateforme logicielle pour le dialogue essai - calcul, Giens, Var, France: Université Paris-Saclay; 2017.
43. Chiaruttini V, Riolo V, Feyel F. Advanced remeshing techniques for complex 3D crack propagation. vol. 1, Beijing: 2013, p. 547–55.
44. Destuynder P. Quelques remarques sur la mécanique de la rupture élastique. Rapport EDF--82H335387 1983:37.
45. Hourlier F, d’Hondt H, Truchon M, Pineau A. Fatigue Crack Path Behavior Under Polymodal Fatigue. In: Miller K, Brown M, editors. Multiaxial Fatigue, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International; 1985, p. 228-228–21. 10.1520/STP36226S.10.1520/STP36226S ↗
46. Fatigue crack growth under non-proportional mixed-mode loading in rail steel : From experiment to simulation
47. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
48. The third-body approach: a mechanical view of wear10.1016/0043-1648(84)90025-5 ↗
49. A crack in a linear-elastic material under mode II loading, revisited10.1046/j.1460-2695.1999.00178.x ↗
50. Friction and roughness induced closure effects on shear-mode crack growth and branching mechanisms10.1016/j.ijfatigue.2016.01.023 ↗