Evaluation of the residual fatigue lifetime of a semi-elliptical crack of a Low-Alloy steel pressure vessel under High-Pressure gaseous hydrogen

1. The survey of key technologies in hydrogen energy storage10.1016/j.ijhydene.2016.05.293 ↗

2. Towards sustainable energy. Generation of hydrogen fuel using nuclear energy10.1016/j.ijhydene.2016.05.054 ↗

3. Development of large scale unified system for hydrogen energy carrier production and utilization: Experimental analysis and systems modeling10.1016/j.ijhydene.2016.12.088 ↗

4. Development of a market penetration forecasting model for Hydrogen fuel cell vehicles considering infrastructure and cost reduction effects10.1016/j.enpol.2011.03.021 ↗

5. Hydrogen admixture to the natural gas grid

6. Hydrogen embrittlement of austenitic stainless steels

7. Effects of hydrogen on fatigue crack growth behavior of austenitic stainless steels10.1016/j.ijhydene.2008.02.067 ↗

8. The effect of hydrogen on fatigue properties of metals used for fuel cell system10.1007/s10704-006-7158-2 ↗

9. Effects of hydrogen on the properties of iron and steel10.1007/BF02654700 ↗

10. A first principles study on H-atom interaction with bcc metals10.1016/j.ijhydene.2022.11.275 ↗

11. Effect of hydrogen on very high cycle fatigue behavior of a low-strength Cr-Ni-Mo-V steel containing micro-defects10.1016/j.prostr.2017.11.102 ↗

12. Fracture properties and fatigue life assessment of API X70 pipeline steel under the effect of an environment containing hydrogen10.1007/s12206-021-0310-0 ↗

13. San Marchi C, Somerday BP, Nibur KA, Stalheim DG, Boggess T, Janstro S. Fracture and fatigue of commercial grade API pipeline steels in gaseous hydrogen. In: Proceedings of the ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference, Volume 6, Parts A and B, Bellevue, Washington, USA. July 18–22, 2010. pp. 939-948. https://doi.org/10.1115/PVP2010-25825.10.1115/PVP2010-25825 ↗

14. Recommendations on X80 steel for the design of hydrogen gas transmission pipelines10.1016/j.ijhydene.2012.02.009 ↗

15. Numerical simulation of hydrogen embrittlement and local triaxiality effects in notched specimens10.1016/j.tafmec.2017.06.017 ↗

16. Effect of hydrogen and stress concentration on the notch tensile strength of AISI 4135 steel10.1016/j.msea.2005.03.008 ↗

17. Hydrogen embrittlement phenomena and mechanisms10.1515/corrrev-2012-0502 ↗

18. Hydrogen-enhanced localized plasticity—a mechanism for hydrogen-related fracture10.1016/0921-5093(94)90975-X ↗

19. The role of hydrogen in hydrogen embrittlement fracture of lath martensitic steel10.1016/j.actamat.2012.06.040 ↗

20. Equilibrium aspects of hydrogen-induced cracking of steels10.1016/0001-6160(74)90061-3 ↗

21. The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: Localized plasticity and decohesion10.1016/j.engfracmech.2019.106528 ↗

22. Hydrogen embrittlement of industrial components: Prediction, prevention, and models10.5006/1958 ↗

23. The necessity of both plasticity and brittleness in the fracture thresholds of iron10.1080/01418619108204854 ↗

24. A coupled diffusion and cohesive zone modelling approach for numerically assessing hydrogen embrittlement of steel structures10.1016/j.ijhydene.2017.02.211 ↗

25. Atomic mechanism and prediction of hydrogen embrittlement in iron10.1038/nmat3479 ↗

26. Tensile behavior of SA 372 steel at high pressure gaseous hydrogen. In: Proceedings of the KSME spring 2011 materials and fracture division

27. Hydrogen-enhanced-plasticity mediated decohesion for hydrogen-induced intergranular and “quasi-cleavage” fracture of lath martensitic steels10.1016/j.jmps.2017.12.016 ↗

28. Discussion of some recent literature on hydrogen-embrittlement mechanisms: Addressing common misunderstandings10.1515/corrrev-2019-0017 ↗

29. Interpretation of hydrogen-assisted fatigue crack propagation in BCC iron based on dislocation structure evolution around the crack wake10.1016/j.actamat.2018.06.041 ↗

30. Literature survey of gaseous hydrogen effects on the mechanical properties of carbon and low alloy steels10.1115/1.3141435 ↗

31. Matsuo T, Matsuoka S, Murakami Y. Fatigue crack growth properties of quenched and tempered Cr-Mo steel in 0.7 MPa hydrogen gas. In: Proceedings of the 18th European Conference on Fracture. 18th European Conference on Fracture, Dresden, Germany. Aug 30–Sep 3, 2010.

32. Yamabe J, Itoga H, Awane T, Matsunaga H, Hamada S, Matsuoka S. Fatigue-life and leak-before-break assessments of Cr-Mo steel pressure vessels with high-pressure gasesous hydrogen. In: Proceedings of the ASME 2014 Pressure Vessels and Piping Division/K-PVP Conference. ASME 2014 Pressure Vessels and Piping Conference: Volume 6B, Anaheim, California, USA. July 20–24, 2010. https://doi.org/10.1115/PVP2014-28604.10.1115/PVP2014-28604 ↗

33. Overview of the DOE hydrogen safety, codes and standards program, part 3: Advances in research and development to enhance the scientific basis for hydrogen regulations, codes and standards10.1016/j.ijhydene.2016.07.014 ↗

34. Slow strain rate tensile and fatigue properties of Cr-Mo and carbon steels in a 115 MPa hydrogen gas atmosphere10.1016/j.ijhydene.2015.02.098 ↗

35. Safety Standard for Hydrogen and hydrogen systems: Guidelines for hydrogen system design, materials selection, operations, storage and transportation

36. Fatigue crack threshold and crack growth behavior of 17–4 PH steel determined with internal hydrogen10.1016/j.engfracmech.2022.108882 ↗

37. Critical hydrogen concentration for crack propagation in a CrMo steel: Targeted experiments for accurate numerical modelling10.1016/j.engfracmech.2022.108764 ↗

38. Effect of hydrogen on low-cycle fatigue behavior of HRB400 steel under asymmetric cyclic loading10.1016/j.ijhydene.2022.09.218 ↗

39. Effect of hydrogen on very high cycle fatigue properties of 17–4 PH martensite stainless steel10.1016/j.ijfatigue.2023.107741 ↗

40. A study of hydrogen embrittlement of SA-372 J class high pressure hydrogen storage seamless cylinder (≥100 MPA)10.3390/ma15217714 ↗

41. Effects of crack position on fatigue life of large seamless storage vessels made of 4130X for hydrogen refueling station10.1016/j.ijhydene.2019.03.207 ↗

42. Section · 2017

43. On the physical differences between tensile testing of type 304 and 316 austenitic stainless steels with internal hydrogen and in external hydrogen10.1016/j.ijhydene.2010.06.018 ↗

44. Effect of nickel equivalent on hydrogen gas embrittlement of austenitic stainless steels based on type 316 at low temperatures10.1016/j.actamat.2008.03.022 ↗

45. Microstructural aspects upon hydrogen environment embrittlement of various BCC steels10.1016/j.ijhydene.2009.10.092 ↗

46. Damage assessment and mechanical performance of Cr-Mo steel used in hydrogen storage vessels10.1016/j.engfailanal.2020.105031 ↗

47. Different effects of pure hydrogen vs. hydrogen/natural gas mixture on fracture toughness degradation of two carbon steels10.1016/j.matlet.2021.129924 ↗

48. Review and assessment of the effect of hydrogen gas pressure on the embrittlement of steels in gaseous hydrogen environment10.3390/met11040637 ↗

49. A Critical perspective on pipeline processing and failure risks in hydrogen service conditions10.1016/j.jallcom.2020.158240 ↗

50. Use of existing steel pipeline infrastructure for gaseous hydrogen storage and transport: A review of factors affecting hydrogen induced degradation10.1016/j.jngse.2022.104534 ↗

51. ASTM G142-98. Standard test method for determination of susceptibility of metals to embrittlement in hydrogen containing environments at high pressure, high temperature, or both. ASTM International, West Conshohocken, PA, USA. (2016).

52. ASTM E1820. Standard test method for measurement of fracture toughness. ASTM International, West Conshohocken, PA, USA. (2009).

53. ASTM E647-15. Standard test method for measurement of fatigue crack growth rates. ASTM International, West Conshohocken, PA, USA. (2015).

54. BS 7448: Part 1. Fracture menchanics toughness tests: Part 1. Method for determination of KIc, critical CTOD and critical J values of metallic materials. British Standards Institution, London, UK. (1991).

55. Zhang H, Zhang H, Zhao X, Wang Y, Li N. Study of thickness effect on fracture toughness of high grade pipeline steel. In: Proceedings of the International Symposium on Materials Application and Engineering 2016. Volume 67, Chiang Mai, Thailand. August 20–21, 2016. https://doi.org/10.1051/matecconf/20166703016.10.1051/matecconf/20166703016 ↗

56. On the Calibration of the electrical potential technique for monitoring crack growth using finite element methods10.1007/BF00115908 ↗

57. Optimization of the electrical potential technique for crack growth monitoring in compact test pieces using finite element analysis10.1520/JTE11382J ↗

58. San Marchi C, Harris A, Yip M, Somerday BP, Nibur KA. Pressure cycling of steel pressure vessels with gaseous hydrogen. In: Proceedings of the ASME 2012 Pressure Vessels and Piping Division/K-PVP Conference. ASME 2012 Pressure Vessels and Piping Conference: Volume 6, Parts A and B, Toronto, Ontario, Canada. July 15–19, 2012. pp. 835-844. https://doi.org/10.1115/PVP2012-78709.10.1115/PVP2012-78709 ↗

59. San Marchi C, Dedrick DE, Van Blarigan P, Somerday BP, Nibur KA. Pressure cycling of type 1 pressure vessels with gaseous hydrogen. In: Proceedings of ICHS 2011 International Conference on Hydrogen Safety. ICHS 2011 International Conference on Hydrogen Safety, San Francisco, California, USA. Sep 12–14, 2011.

60. Fatigue crack growth of two pipeline steels in a pressurized hydrogen environment10.1016/j.corsci.2013.10.014 ↗

61. BPVC Section VIII-Rules for Construction of Pressure Vessels Division 3-Alternative Rules for Construction of High Pressure Vessels. American Society of Mechanical Engineers, New York, USA. (2021).

62. KHKS 0220. Standard for Ultra-high Pressure Gas Equipment. The High Pressure Gas Safety Institute of Japan, Tokyo, Japan. (2020).

63. BPVC Section VIII-Rules for Construction of Pressure Vessels Division 1. American Society of Mechanical Engineers, New York, USA. (2021).

64. Review on large-scale hydrogen storage systems for better sustainability

65. A New method for analysis of part-elliptical surface cracks in structures subjected to fatigue loading10.1016/j.tafmec.2019.102258 ↗

66. Creep crack growth analysis using Ct-parameter for internal circumferential and external axial surface cracks in a pressurized cylinder10.1007/s12206-016-1113-6 ↗

67. Creep crack growth analysis of elliptic surface cracks in pressure vessels10.1016/S0308-0161(03)00101-7 ↗

68. Prediction of weld toe magnification factors for semi-elliptical cracks in T-butt joints10.1016/S0142-1123(00)00012-8 ↗

69. An empirical stress-intensity factor equation for the surface crack10.1016/0013-7944(81)90116-8 ↗

70. Weight function method to determine stress intensity factor for semi-elliptical crack with high aspect ratio in cylindrical vessels10.1016/j.engfracmech.2013.05.014 ↗

71. Stress-intensity factors for a wide range of semi-elliptical surface cracks in finite-thickness plates10.1016/0013-7944(79)90139-5 ↗

72. Newman · 1979

73. Stress-intensity factors for internal and external surface cracks in cylindrical vessels10.1115/1.3264220 ↗

74. Stress-intensity factors for internal surface cracks in cylindrical pressure vessels10.1115/1.3263343 ↗

75. Finite element modelling of fatigue crack growth of surface cracked plates: Part III: Stress intensity factor and fatigue crack growth life10.1016/S0013-7944(99)00042-9 ↗

76. Stress intensity factors and weight functions for semi-elliptical cracks at weld toes in U-rib-to-deck joints10.1016/j.tafmec.2022.103697 ↗

77. Fatigue life and penetration behavior of a surface-cracked plate under combined tension and bending10.1111/j.1460-2695.1994.tb00817.x ↗

78. Weld toe magnification factors for semi-elliptical cracks in T-butt joints-comparison with existing solutions10.1016/S0142-1123(00)00013-X ↗

79. Abaqus 6.11: Scripting User’s Manual. Simulia, Dassault Systèmes, Providence, RI, USA. (2011).

80. Observation of hydrogen damage in a failed pressure vessel10.1016/0010-938X(87)90097-7 ↗

81. Lemaitre J, Chaboche JL. Mechanics of solid materials. Cambridge: Cambridge University Press; 1990.10.1017/CBO9781139167970 ↗

82. Data sheets on low-cycle fatigue properties of SCM 435 (0.35C-1Cr-0.2Mo) steel for machine structural use. NRIM fatigue data sheet: national institute for