Elastic–plastic analysis of high load ratio fatigue tests on a shot-peened quenched and tempered steel, combining the Chaboche model and the Theory of Critical Distances
Source abstract
Abstract
This study aimed to predict the uniaxial fatigue strength of shot peened notched specimens made of 42CrMo4 quenched and tempered steel. The Chaboche kinematic hardening rule was employed to model the cyclic plastic behaviour of the tested samples and the evolution of the residual stresses, which were measured with X-ray diffraction and then reproduced through a finite element software with a novel proposed procedure. This latter introduced a distribution of eigenstrains to reproduce the initial residual stresses and a hardening of the material to replicate the residual stresses measured after the loading for a run-out specimen. The Theory of Critical Distances combined with the Smith-Watson and Topper multiaxial fatigue criterion were then employed to predict the fatigue strength resulting in a good level of accuracy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Surface Treatment and Residual Stress · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Theorie der technischen Formzahl10.1007/BF02584908 ↗
2. Neuber · 1958
3. Notch sensitivity
4. Taylor · 2007 · 306
5. Fatigue crack propagation of short cracks10.1115/1.3443647 ↗
6. Determination of the fatigue critical distance according to the line and the point methods with rounded V-notched specimen10.1016/j.ijfatigue.2017.10.002 ↗
7. Experimental determination and sensitivity analysis of the fatigue critical distance obtained with rounded V-notched specimens10.1016/j.ijfatigue.2018.03.037 ↗
8. Plain and notch fatigue strength of thick-walled ductile cast iron EN-GJS-600-3: A double-notch critical distance approach to defect sensitivity10.1016/j.ijfatigue.2021.106414 ↗
9. A simplified approach to apply the theory of critical distances to notched components under torsional fatigue loading10.1016/j.ijfatigue.2005.07.035 ↗
10. The theory of critical distances to estimate finite lifetime of notched components subjected to constant and variable amplitude torsional loading10.1016/j.engfracmech.2012.12.007 ↗
11. Mode III critical distance determination with optimized V-notched specimen under torsional fatigue and size effects on the inverse search probability distribution10.1016/j.ijfatigue.2021.106351 ↗
12. A multiaxial criterion for notch high-cycle fatigue using a critical-point method10.1016/j.engfracmech.2006.11.002 ↗
13. Fatigue of 7075-T651 aluminum alloy10.1016/j.ijfatigue.2007.07.005 ↗
14. Multiaxial fatigue life prediction for titanium alloy TC4 under proportional and nonproportional loading10.1016/j.ijfatigue.2013.08.028 ↗
15. Study of crack orientation and fatigue life prediction in biaxial fatigue with critical plane models10.1016/j.engfracmech.2015.01.020 ↗
16. High load ratio fatigue strength and mean stress evolution of quenched and tempered 42CrMo4 steel10.1007/s11665-017-2845-x ↗
17. Evaluation and comparison of critical plane criteria for multiaxial fatigue analysis of ductile and brittle materials10.1016/j.ijfatigue.2018.03.028 ↗
18. A deviatoric tensile-based critical plane model to predict peak/mean normal stress effects in multiaxial fatigue10.1016/j.ijfatigue.2021.106615 ↗
19. Load sequence effects and cyclic deformation behaviour of 7075-T651 aluminium alloy10.1016/j.ijfatigue.2021.106593 ↗
20. Comparison of different one-parameter damage laws and local stress-strain approaches in multiaxial fatigue life assessment of notched components10.1016/j.ijfatigue.2021.106405 ↗
21. Load path sensitivity and multiaxial fatigue life prediction of metals under non-proportional loadings10.1016/j.ijfatigue.2022.107281 ↗
22. Torsional-loaded notched specimen fatigue strength prediction based on mode I and mode III critical distances and fracture surface investigations with a 3D optical profilometer10.1016/j.ijfatigue.2022.106913 ↗
23. Multiaxial fatigue analysis of notched components using combined critical plane and critical distance approach10.1016/j.ijmecsci.2019.06.027 ↗
24. A critical distance/plane method to estimate finite life of notched components under variable amplitude uniaxial/multiaxial fatigue loading10.1016/j.ijfatigue.2011.11.015 ↗
25. Application of the theory of critical distances to predict the effect of induced and process inherent defects for SLM Ti-6Al-4V in high cycle fatigue10.1016/j.cirp.2021.03.004 ↗
26. Multiaxial plain and notch fatigue strength of thick-walled ductile cast iron EN-GJS-600-3: Combining multiaxial fatigue criteria, theory of critical distances, and defect sensitivity10.1016/j.ijfatigue.2021.106703 ↗
27. Cyclic plastic zone-based notch analysis and damage evolution model for fatigue life prediction of metals10.1016/j.matdes.2020.108639 ↗
28. Continuum damage mechanics: Part I—General concepts10.1115/1.3173661 ↗
29. Cyclic plastic zone modified critical distance theory for notch fatigue analysis of metals10.1016/j.engfailanal.2020.105163 ↗
30. Time-independent constitutive theories for cyclic plasticity10.1016/0749-6419(86)90010-0 ↗
31. Voce · 1948
32. A mathematical representation of the multiaxial Bauschinger effect10.3184/096034007X207589 ↗
33. Mean stress and plasticity effect prediction on notch fatigue and crack growth threshold, combining the theory of critical distances and multiaxial fatigue criteria10.1111/ffe.12910 ↗
34. New methodology of fatigue life evaluation for multiaxially loaded notched components based on two uniaxial strain-controlled tests10.1016/j.ijfatigue.2018.02.027 ↗
35. Cyclic plastic deformation response at fatigue crack tips10.1016/j.ijpvp.2012.10.007 ↗
36. Numerical models to determine the effect of soft and hard inclusions on different plastic zones of a fatigue crack in a C(T) specimen10.1016/j.engfracmech.2016.03.028 ↗
37. On some modifications of kinematic hardening to improve the description of ratchetting effects10.1016/0749-6419(91)90050-9 ↗
38. Cyclic inelastic constitutive equations and their impact on the fatigue life predictions10.1016/j.ijplas.2012.01.010 ↗
39. Determination of chaboche combined hardening parameters with dual backstress for ratcheting evaluation of AISI 52100 bearing steel10.1016/j.ijfatigue.2019.01.009 ↗
40. On the calibration of the chaboche hardening model and a modified hardening rule for uniaxial ratcheting prediction10.1016/j.ijsolstr.2009.04.002 ↗
41. Analysis of uniaxial ratcheting behavior and cyclic mean stress relaxation of a duplex stainless steel10.1016/j.ijplas.2014.06.008 ↗
42. A strategy to fast determine Chaboche elasto-plastic model parameters by considering ratcheting10.1016/j.ijpvp.2019.01.017 ↗
43. Parameter determination of Chaboche kinematic hardening model using a multi objective Genetic Algorithm10.1016/j.commatsci.2010.11.010 ↗
44. Sensitivity and optimisation of the Chaboche plasticity model parameters in strain-life fatigue predictions10.1016/j.matdes.2017.01.027 ↗
45. Evaluation of sensitivity and calibration of the chaboche kinematic hardening model parameters for numerical ratcheting simulation10.3390/app9122578 ↗
46. Parameter identification of chaboche model for aluminum alloy sheets based on differential evolution algorithm10.55579/jaec.202263.375 ↗
47. A computationally fast and accurate procedure for the identification of the Chaboche isotropic-kinematic hardening model parameters based on strain-controlled cycles and asymptotic ratcheting rate10.1016/j.ijplas.2022.103503 ↗
48. Investigation of chaboche and Bouc–Wen parameters of quenched and tempered steel and comparison of model predictive capabilities10.3390/app13052961 ↗
49. Effect of shot peening on the fatigue resistance of laser surface melted 20CrMnTi steel gear10.1016/j.msea.2015.01.074 ↗
50. Effect of the shot peening process on the fatigue strength of SAE 5160 steel10.1177/0954406218816349 ↗
51. The influence of age hardening and shot peening on the surface properties of 7075 aluminium alloy10.3390/ma14092220 ↗
52. Effect of shot peening on microstructure, nanocrystallization and microhardness of Ti–10V–2Fe–3Al alloy surface10.1007/s42243-018-0206-0 ↗
53. Effect of severe shot peening on microstructure and fatigue strength of cast iron10.1016/j.ijfatigue.2013.08.022 ↗
54. Effects of conventional and severe shot peening on residual stress and fatigue strength of steel AISI 1060 and residual stress relaxation due to fatigue loading: Experimental and numerical simulation10.1007/s12540-020-00890-8 ↗
55. Mura · 1987
56. The modelling of residual stresses due to surface peening using eigenstrain distributions10.1243/030932405X30984 ↗
57. Residual stress analysis in shot peened and fretting fatigued samples by the eigenstrain method10.4028/www.scientific.net/MSF.524-525.343 ↗
58. Residual elastic strain due to laser shock peening: Modelling by eigenstrain distribution10.1243/03093247JSA141 ↗
59. Residual elastic strains in autofrettaged tubes: Elastic–Ideally plastic model analysis10.1115/1.2400267 ↗
60. A beam-bending eigenstrain analysis of residual elastic strains in multi-scan laser-formed steel samples10.1243/09544062JMES750 ↗
61. Variational eigenstrain analysis of residual stresses in a welded plate10.1016/j.ijsolstr.2006.11.037 ↗
62. Evaluation of residual stresses and strains using the Eigenstrain Reconstruction Method10.1016/j.ijsolstr.2010.03.002 ↗
63. Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade10.1016/j.cma.2017.03.005 ↗
64. Eigenstrain modelling of residual stresses generated by laser shock peening10.1016/j.jmatprotec.2011.01.011 ↗
65. Quantifying eigenstrain distributions induced by focused ion beam damage in silicon10.1016/j.matlet.2016.08.111 ↗
66. Nanoscale residual stress depth profiling by Focused Ion Beam milling and eigenstrain analysis10.1016/j.matdes.2018.02.044 ↗
67. Numerical simulation of residual stress relaxation in shot peened high-strength aluminum alloys under reverse bending fatigue10.1115/1.3184083 ↗
68. DEM/FEM simulation of the shot peening process on sharp notches10.1016/j.ijmecsci.2021.106547 ↗
69. Application of different fatigue strength criteria on shot peened notched parts. Part 2: nominal and local stress approaches10.1016/j.apsusc.2013.10.130 ↗
70. Multiaxial fatigue resistance of shot peened high-strength aluminum alloys10.1016/j.ijfatigue.2013.10.020 ↗
71. Fatigue strength prediction methodology of shot-peened materials10.1007/s00170-019-04089-z ↗
72. Notch fatigue behaviour of shot peened high-strength aluminium alloys: Experiments and predictions using a critical distance method10.1016/j.ijfatigue.2010.02.012 ↗
73. On the combination of the critical distance theory with a multiaxial fatigue criterion for predicting the fatigue strength of notched and plain shot-peened parts10.1016/j.ijfatigue.2016.08.015 ↗
74. Application of different fatigue strength criteria to shot peened notched components. Part 1: Fracture mechanics based approaches10.1016/j.apsusc.2013.10.131 ↗
75. A unified treatment of the mode I fatigue limit of components containing notches or defects10.1007/s10704-005-2183-0 ↗
76. UNI. UNI EN 15305: Non-destructive testing. Test method for residual stress analysis by X-ray diffraction, 2008.
77. Correlation between endurance limit and cyclic yield stress determined from low cycle fatigue test10.1016/j.mtla.2020.100695 ↗