The critical assessment for the fatigue limit of nanocrystallized surface with micro-notches obtained by ultrasonic surface rolling processing
Source abstract
Abstract
Abstract The fatigue limits of micro-notched specimens with nanocrystallized surface fabricated by ultrasonic surface rolling processing (USRP) are determined at room temperature. Two kinds of metal materials of specimens, IF steel with single ferritic phase (body-centered cubic, BCC) and 316L with single austenitic phase (face-centered cubic, FCC), are selected. The experimentally determined fatigue limits of micro-notched USRP specimens, with and without stress relieving treatment, are both much higher than that of coarse grain specimens due to surface hardening and compressive residual stress. Furthermore, it is verified that the predicted value from Murakami’s model agrees well with the experimental value of not only the coarse grain specimen but also the specimen with nanocrystallized surface if the surface Vickers hardness is selected.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Influence of sub-surface defects on low-cycle fatigue life in a gas turbine disc alloy at elevated temperature10.1016/S0142-1123(98)00062-0 ↗
2. Influence of electrical discharged machining and surface defects on the fatigue strength of electrodeposited nanocrystalline Ni10.1016/j.ijfatigue.2009.04.010 ↗
3. Influence of loading frequency and role of surface micro-defects on fatigue behavior of metastable austenitic stainless steel AISI 30410.1016/j.ijfatigue.2017.05.018 ↗
4. Effect of case depth on fatigue performance of AISI 8620 carburized steel10.1016/S0142-1123(98)00061-9 ↗
5. Fatigue strength and fracture mechanism of steel modified by super-rapid induction heating and quenching10.1016/S0142-1123(01)00164-5 ↗
6. Influence of ion nitriding on fatigue strength of low-alloy (42CrMo4) steel: Experimental characterization and predictive approach10.1016/j.ijfatigue.2010.04.004 ↗
7. Surface nanocrystallization of iron induced by ultrasonic shot peening10.1016/S0965-9773(99)00324-4 ↗
8. Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening10.1016/S0921-5093(00)00686-9 ↗
9. Effect of severe shot peening on microstructure and fatigue strength of cast iron10.1016/j.ijfatigue.2013.08.022 ↗
10. Fatigue behavior of X70 microalloyed steel after severe shot peening10.1016/j.ijfatigue.2013.04.021 ↗
11. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment10.1016/S1359-6454(02)00310-5 ↗
12. Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment10.1016/j.scriptamat.2006.01.049 ↗
13. Fabrication of a gradient nano-micro-structured surface layer on bulk copper by means of a surface mechanical grinding treatment10.1016/j.scriptamat.2008.05.003 ↗
14. Enhanced fatigue resistance of Cu with a gradient nanograined surface layer10.1016/j.scriptamat.2013.01.031 ↗
15. Investigations on the nanocrystallization of 40Cr using ultrasonic surface rolling processing10.1016/j.apsusc.2008.06.034 ↗
16. The influence of ultrasonic surface rolling on the fatigue and wear properties of 23-8N engine valve steel10.1016/j.ijfatigue.2019.04.010 ↗
17. Formation of nanolaminated structure in an interstitial-free steel10.1016/j.scriptamat.2014.10.003 ↗
18. Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer10.1016/j.actamat.2014.12.057 ↗
19. Enhanced fatigue property by suppressing surface cracking in a gradient nanostructured bearing steel10.1080/21663831.2016.1253625 ↗
20. Evaluation of the influence of surface crack-like defects on fatigue life for a P/M nickel-based superalloy FGH9610.1016/j.ijfatigue.2020.105639 ↗
21. Effect of defect shape on rolling contact fatigue crack initiation and propagation in high strength steel10.1016/j.ijfatigue.2016.02.015 ↗
22. Cyclic deformation and fatigue behavior of 316L stainless steel processed by surface mechanical rolling treatment10.1016/j.ijfatigue.2019.105469 ↗
23. Murakami · 2002
24. On the determination of residual stress and strain fields by sharp indentation testing.: Part I: theoretical and numerical analysis10.1016/S1359-6454(01)00122-7 ↗
25. 1998