Comparison between EDM and grinding machining on fatigue behaviour of AISI D2 tool steel

Abstract Non-conventional machining processes, such as the Electrical Discharging Machining (EDM) offers the possibility to machine very hard materials with great potential to generate complex geometries. However, the EDM process involves significant microstructural changes in the as machined surfaces, which are known to have a significant impact on fatigue behaviour of mechanical parts. This study aims at investigating the fatigue behaviour of the AISI D2 tool steel subjected to EDM machining. Both smooth and notched specimens are tested aiming at assessing the fatigue notch sensitivity of this material and results compared with conventional grinding techniques in terms of fatigue resistance and residuals stresses. The AISI D2 steel shows a microstructure composed of large dendritic primary carbides detrimental to the fatigue resistance. Also, the EDM process is responsible for the generation of detrimental tensile residual stresses that justifies the lower fatigue resistance when compared with the ground material that exhibits beneficial compressive residual stresses. The fatigue test data of the notched specimens machined by EDM process show a high fatigue notch sensitivity of the AISI D2 tool steel. The heterogeneous structure of the material, showing large undissolved carbides, leads to a notch fatigue reduction factor that is higher to the apparent theoretical elastic stress concentration factor.