Roughness-induced stress shielding effect in fatigue crack propagation under Mode II loading
Source abstract
Abstract
Abstract Roughness-induced stress shielding effect under cyclic Mode II loading caused by fracture surface roughness, i.e., the effect of decreasing loading stress intensity factor K, is investigated. A fatigue crack propagation test by applying cyclic Mode II loading on a small textured material is performed. The decrease in K is a few percent quantitatively, and the decrease is sufficiently small to ignore. Using the failure surface observation results, we discuss the mechanism of the fatigue crack propagation during cyclic Mode II loading on the textured material and validate the repeated crack propagation mechanism of damage accumulation, void formation, and coalescence.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High-Velocity Impact and Material Behavior · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Initiation and propagation of surface cracks in rolling fatigue of high hardness steel10.1016/0043-1648(75)90075-7 ↗
2. An overview of the delamination theory of wear10.1016/0043-1648(77)90081-3 ↗
3. A pitting model for rolling contact fatigue Transactions of the ASME10.1115/1.3254565 ↗
4. A test method for Mode II fatigue crack growth relating to a model for rolling contact fatigue10.1111/j.1460-2695.1996.tb00949.x ↗
5. EBSD investigation of the crack initiation and TEM/FIB analyses of the microstructural changes around the cracks formed under Rolling Contact Fatigue (RCF)10.1016/j.ijfatigue.2009.07.002 ↗
6. Mode II fatigue crack growth in aluminum alloys
7. A new method for the measurement of Mode II fatigue threshold stress intensity factor range Δκτth10.1111/j.1460-2695.1997.tb01530.x ↗
8. A new testing method to obtain Mode II fatigue crack growth characteristics of hard materials10.1111/j.1460-2695.2004.00747.x ↗
9. Material response to rolling contact loading10.1115/1.3261078 ↗
10. Cumulative plastic flow in rolling and sliding line contact10.1115/1.3172958 ↗
11. The role of deformed rail microstructure on rolling contact fatigue initiation10.1016/j.wear.2008.02.042 ↗
12. Rolling contact fatigue of three pearlitic rail steels10.1016/0043-1648(95)06776-0 ↗
13. Rail rolling contact fatigue. The performance of naturally hard and head-hardened rails in track10.1016/0043-1648(95)06702-7 ↗
14. Surface cracks and wear of rail: a full-scale test on a commuter train track10.1243/095440902321029208 ↗
15. Empirical studies of head check propagation on the DB network10.1016/j.wear.2013.11.035 ↗
16. Rolling contact fatigue: spalling versus transverse fracture of rails10.1016/j.wear.2017.03.003 ↗
17. A fracture mechanics approach to wear10.1016/0043-1648(80)90117-9 ↗
18. The effects of crack surface friction and roughness on crack tip stress-fields10.1007/BF00019717 ↗
19. The influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks10.1115/1.3261717 ↗
20. A model for sliding mode crack closure. Part I. Theory for pure Mode II loading10.1016/0013-7944(95)00044-V ↗
21. Evidence of fracture surface interference for cracks loaded in shear detected by phase-shifted speckle interferometry10.1007/BF02595634 ↗
22. The preferred fatigue crack propagation mode in a M250 maraging steel loaded in shear10.1046/j.1460-2695.1999.00161.x ↗
23. Derivation of effective stress intensity factors from measured crack face displacements10.1016/j.engfracmech.2009.02.017 ↗
24. Friction and roughness induced closure effects on shear-mode crack growth and branching mechanisms10.1016/j.ijfatigue.2016.01.023 ↗
25. Test method for Mode II fatigue crack propagation in a small specimen. Part I: mechanical examination
26. Test method for Mode II fatigue crack propagation in a small specimen. Part II: experimental examination
27. The effects of top of rail friction modifier on wear and rolling contact fatigue: full-scale rail-wheel test rig evaluation, analysis and modelling10.1016/j.wear.2008.02.029 ↗
28. Fatigue damage initiation mechanism in carbon steel thin film under cyclic in-plane pure shear loading
29. Bearing pressures and cracks10.1115/1.4008919 ↗
30. Johnson · 1985
31. Murakami · 1987
32. Stress analysis of cracks
33. Phenomenon and mechanism of fatigue crack propagation under Mode II loading: an example of cold rolled sheet steel10.1016/j.ijfatigue.2018.06.029 ↗
34. Crack propagation in high stress fatigue10.1080/14786436208212674 ↗
35. The influence of metallurgical structure on the mechanisms of fatigue crack propagation
36. Coarse slip model of fatigue10.1016/0001-6160(69)90099-6 ↗
37. Mechanisms of formation of ductile fatigue striations
38. Crack extension by alternating shear10.1016/0013-7944(70)90008-1 ↗
39. The condition of fatigue crack growth in mixed mode condition10.1016/0013-7944(75)90043-0 ↗
40. Fatigue crack propagation under Mode II loading10.1007/BF00036020 ↗
41. Influence of non-geometric effect of PSB on crack initiation in aluminium single crystal10.1016/0956-7151(90)90011-5 ↗
42. Fatigue damage in aluminum single crystals—I. On the surface containing the slip burgers vector10.1016/0956-7151(95)90165-5 ↗