Energy-based critical plane fatigue methods applied to additively manufactured 18Ni300 steel
Source abstract
Abstract
In this work, the uniaxial and biaxial fatigue behaviour of maraging steel (18Ni300) obtained by additive manufacturing was studied. The material was evaluated using several biaxial load paths and different load levels. The predictive capacity of the fatigue life and crack initiation angle of the critical plane methods of Liu (I and II), and Chu, Conle, and Bonnen (CCB) were evaluated. The results obtained showed that normal stresses had a strong effect on the fatigue life. In general, the best estimates of the useful life and initial crack angle prediction were obtained with the CCB method.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Fatigue and fracture mechanics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Additive manufacturing in the context of structural integrity10.1016/j.ijfatigue.2016.07.005 ↗
2. State-of-the-art of selective laser melting process: a comprehensive review10.1016/j.jmsy.2022.04.002 ↗
3. Parametric analysis of the selective laser melting process10.1016/j.apsusc.2007.02.088 ↗
4. Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects10.1016/j.ijfatigue.2019.105358 ↗
5. A critical review of powder-based additive manufacturing of ferrous alloys: process parameters, microstructure and mechanical properties10.1016/j.matdes.2018.02.018 ↗
6. Notched fatigue of additive manufactured metals under axial and multiaxial loadings, Part I: effects of surface roughness and HIP and comparisons with their wrought alloys10.1016/j.ijfatigue.2020.106003 ↗
7. Effects of small defects on fatigue strength of metals10.1016/0142-1123(80)90024-9 ↗
8. An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing10.1016/j.ijfatigue.2018.08.034 ↗
9. Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel10.1016/j.matdes.2017.08.026 ↗
10. Fatigue behaviour of selective laser melting steel components10.1016/j.tafmec.2016.08.011 ↗
11. Influence of the build orientation on the fatigue strength of EOS maraging steel produced by additive metal machine10.1111/ffe.12395 ↗
12. Sensitivity of direct metal laser sintering Maraging steel fatigue strength to build orientation and allowance for machining
13. Additive manufacturing of fatigue resistant materials: challenges and opportunities10.1016/j.ijfatigue.2017.01.001 ↗
14. Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6Al-4V including build orientation and surface roughness effects10.1016/j.ijfatigue.2018.07.035 ↗
15. V Fatigue behaviour of maraging steel samples produced by SLM under constant and variable amplitude loading10.1016/j.prostr.2020.01.002 ↗
16. Effect of heat treatment on the fatigue crack growth behaviour in additive manufactured AISI 18Ni300 steel10.1016/j.tafmec.2019.04.005 ↗
17. Socie DF, Marquis GB. Multiaxial fatigue, 1st ed. Warrendale, PA (USA): Society of Automotive Engineers, Inc.; 2000.
18. A review of critical plane orientations in multiaxial fatigue failure criteria of metallic materials10.1007/s10704-005-1088-2 ↗
19. A theory for fatigue failure under multiaxial stress-strain conditions10.1243/PIME_PROC_1973_187_161_02 ↗
20. Multiaxial fatigue damage models10.1115/1.3225980 ↗
21. Multiaxial fatigue of additive manufactured metals: performance, analysis, and applications10.1016/j.ijfatigue.2020.105479 ↗
22. Multiaxial fatigue behaviour of maraging steel produced by selective laser melting10.1016/j.matdes.2021.109469 ↗
23. Study of the notch fatigue behaviour under biaxial conditions of maraging steel produced by selective laser melting10.1016/j.tafmec.2022.103469 ↗
24. Low-cycle fatigue behaviour of AISI 18Ni300 maraging steel produced by selective laser melting10.3390/met8010032 ↗
25. Multiaxial fatigue of titanium including step loading and load path alteration and sequence effects10.1016/j.ijfatigue.2010.05.006 ↗
26. Crack initiation life prediction for solid cylinders with transverse circular holes under in-phase and out-of-phase multiaxial loading10.1016/j.ijfatigue.2004.09.007 ↗
27. A comparative study of multiaxial high-cycle fatigue criteria for metals10.1016/S0142-1123(96)00064-3 ↗
28. ImageJ. Available from: https://imagej.net/Welcome (accessed on Feb 22, 2019).
29. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
30. Preferred fatigue crack propagation mode in a M250 maraging steel loaded in shear10.1046/j.1460-2695.1999.00161.x ↗
31. Susmel L, Petrone N. Multiaxial fatigue life estimations for 6082-T6 cylindrical specimens under in-phase and out-of-phase biaxial loadings. In: Carpinteri A, de Freitas M, Spagnoli ABT-ESIS, editors. Biaxial/multiaxial fatigue and fracture. Vol. 31. Elsevier; 2003. p. 83–104. ISBN 1566-1369.10.1016/S1566-1369(03)80006-7 ↗
32. Socie D. Multiaxial fatigue. Multiaxial Fatigue 1999, 113.10.4271/R-234 ↗
33. A multiaxial fatigue strain energy parameter related to the critical plane10.1111/j.1460-2695.1995.tb00140.x ↗
34. Chu CC, Conle FA, Bonnen JJF. Multiaxial stress-strain modeling and fatigue life prediction of SAE axle shafts. Adv. Multiaxial Fatigue, ASTM STP 1191. 1993:33–54.10.1520/STP24794S ↗
35. Erickson M, Kallmeyer AR, Van Stone RH, Kurath P. Development of a multiaxial fatigue damage model for high strength alloys using a critical plane methodology. J Eng Mater Technol 2008;130:041008 1–041008 9.10.1115/1.2969255 ↗
36. Cruces AS, Lopez-Crespo P, Moreno B, Antunes FV. Multiaxial Fatigue Life Prediction on S355 Structural and Offshore Steel Using the SKS Critical Plane Model. 2018.10.3390/met8121060 ↗
37. Suresh S. Fatigue of materials, 2nd ed. Cambridge: Cambridge University press; 1998.
38. Stage I crack directions under in-phase axial–torsion fatigue loading for AISI 304L stainless steel10.1016/j.ijfatigue.2015.05.004 ↗
39. Mechanical behaviour and failure mode of high interstitially alloyed austenite under combined compression and cyclic torsion