In-situ experimental investigation of the small fatigue crack behavior in CP-Ti: The influence of micronotch size
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Fatigue of structures and materials in the 20th century and the state of the art10.1016/S0142-1123(03)00051-3 ↗
2. Krupp · 2007
3. A review of fatigue crack growth resistance in the short crack growth regime10.1016/j.msea.2019.03.102 ↗
4. A rational analytic theory of fatigue
5. Mechanisms of fatigue crack growth-a critical digest of theoretical developments10.1111/ffe.12392 ↗
6. On fatigue crack propagation in FCC metals10.1016/0001-6160(63)90010-5 ↗
7. The geometry of slip processes at a propagating fatigue crack—II10.1016/0001-6160(74)90072-8 ↗
8. On the plasticity of the growth of fatigue cracks
9. About the fatigue crack propagation threshold of metals as a design criterion-A review10.1016/j.engfracmech.2015.12.002 ↗
10. Fatigue crack closure: a review of the physical phenomena10.1111/ffe.12578 ↗
11. Initiation of fatigue cracks in commercial aluminium alloys and the subsequent propagation of very short cracks10.1016/0013-7944(75)90004-1 ↗
12. Propagation of short fatigue cracks10.1179/imr.1984.29.1.445 ↗
13. Small crack growth and fatigue life predictions for high-strength aluminium alloys, part I: experimental and fracture mechanics analysis10.1046/j.1460-2695.1998.00080.x ↗
14. Short cracks initiated in Al 6013–T6 with the focused ion beam (FIB)-technology10.1016/j.ijfatigue.2007.01.003 ↗
15. The short crack problem10.1111/j.1460-2695.1982.tb01250.x ↗
16. The Behaviour of Short Fatigue Cracks and Their Initiation Part I-A Review Of Two Recent Books10.1111/j.1460-2695.1987.tb01150.x ↗
17. The Behaviour of Short Fatigue Cracks and Their Initiation Part II-A General Summary10.1111/j.1460-2695.1987.tb01153.x ↗
18. The growth of short cracks under cyclic compression10.1111/j.1460-2695.1987.tb00459.x ↗
19. Crossing grain boundaries in metals by slip bands, cleavage and fatigue cracks10.1098/rsta.2014.0131 ↗
20. Simulating the effect of grain boundaries on microstructurally small fatigue crack growth from a focused ion beam notch through a three-dimensional array of grains10.1016/j.actamat.2016.04.006 ↗
21. Microstructurally-sensitive fatigue crack growth in HCP, BCC and FCC polycrystals10.1016/j.jmps.2019.02.012 ↗
22. In-situ SEM investigation and modeling of small crack growth behavior of additively manufactured titanium alloy10.1016/j.ijfatigue.2021.106303 ↗
23. Initiation and Propagation of Short Fatigue Cracks in Forged Ti6Al4V10.1016/j.proeng.2010.03.101 ↗
24. Quantitative characterization of short fatigue crack and grain boundary interaction behavior in zirconium10.1016/j.ijfatigue.2022.106894 ↗
25. Effect of microtexture on short crack propagation in two-phase titanium alloys10.1016/j.ijfatigue.2017.07.022 ↗
26. A nonlinear continuous damage model based on short-crack concept under variable amplitude loading10.1111/ffe.12334 ↗
27. A grain boundary interaction model for microstructurally short fatigue cracks10.1016/j.ijfatigue.2018.04.029 ↗
28. A 3-D view on the mechanisms of short fatigue cracks interacting with grain boundaries10.1016/j.actamat.2010.11.051 ↗
29. The effect of grain size on small fatigue crack growth in pure titanium10.1016/0142-1123(94)90483-9 ↗
30. Effect of crystallographic orientation and geometrical compatibility on fatigue crack initiation and propagation in rolled Ti-6Al-4V alloy10.1016/j.actamat.2019.07.025 ↗
31. Effects of 3D microstructural distribution on short crack growth behavior in two bimodal Ti-6Al-4V alloys10.1016/j.msea.2019.138264 ↗
32. Microstructure-interacting short crack growth in blocky alpha Zircaloy-410.1016/j.ijplas.2020.102711 ↗
33. Effect of microstructure on small fatigue crack initiation and early propagation behavior in Mg-10Gd-3Y-0.3Zr alloy10.1016/j.ijfatigue.2018.10.002 ↗
34. Effect of twins and plastic-deformation anisotropy of extruded magnesium alloy on fatigue crack growth and crack closure behavior10.1016/j.msea.2021.142111 ↗
35. Effects of microstructure and temperature on short fatigue crack propagation behaviour of powder metallurgy superalloy FGH4098 in vacuum
36. In-situ SEM study of short fatigue crack propagation behavior in a dissimilar metal welded joint of nuclear power plant10.1016/j.matdes.2015.08.090 ↗
37. Investigation of small crack behaviour under cyclic loading in a dual phase steel with an FIB tomography technique10.1111/j.1460-2695.2007.01130.x ↗
38. Measurement of small cracks initiating from inclusions, Focused Ion Beam notches and drilled holes10.1016/j.ijfatigue.2013.03.010 ↗
39. Use of Femtosecond Laser Technique for Studying Physically Small Cracks10.1007/s10704-006-0104-5 ↗
40. Multi-stage dwell fatigue crack growth behaviors in a nickel-based superalloy at elevated temperature10.1016/j.engfracmech.2021.107859 ↗
41. Small fatigue crack propagation rate and behaviours in a powder metallurgy superalloy: Role of stress ratio and local microstructure10.1016/j.ijfatigue.2022.106861 ↗
42. Effect of defects on the fatigue limit of Ni-based superalloy 718 with different grain sizes10.1111/ffe.12989 ↗
43. Fatigue life prediction of nickel-based GH4169 alloy on the basis of a multi-scale crack propagation approach10.1016/j.engfracmech.2018.05.023 ↗
44. Grain size effect on multi-scale fatigue crack growth mechanism of Nickel-based alloy GH416910.1016/j.engfracmech.2015.06.003 ↗
45. ASTM E647-15e1 Standard Test Method for Measurement of Fatigue Crack Growth Rates. In: ASTM E647-15e1. International A, PA; 2015. https://doi.org/10.1520/E0647-22B.10.1520/E0647-22B ↗
46. Micro-notch Size Effect on Small Fatigue Crack Propagation of Nickel-Based Superalloy GH416910.1007/978-3-030-13980-3_25 ↗
47. Study on small crack growth behavior of laser powder bed fused Ti-6Al-4V alloy10.1111/ffe.13725 ↗
48. 3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography10.1016/j.actamat.2010.09.063 ↗
49. Real-time quantitative imaging of failure events in materials under load at temperatures above 1,600℃10.1038/nmat3497 ↗
50. Three-dimensional in situ observations of short fatigue crack growth in magnesium10.1016/j.actamat.2011.07.034 ↗
51. The Role of Local Microstructure on Small Fatigue Crack Propagation in an α + β Titanium Alloy, Ti-6Al-2Sn-4Zr-6Mo10.1007/s11661-012-1228-z ↗
52. Effect of aging treatment on fatigue behavior of an Al-Cu-Mg-Ag alloy10.1007/s11661-013-1876-7 ↗
53. Short-crack growth behavior in additively manufactured AlSi10Mg alloy10.1007/s11665-021-05820-2 ↗
54. Stress intensity factor equations for cracks in three-dimensional finite bodies
55. Small crack growth and fatigue life predictions for high-strength aluminium alloys. Part II: crack closure and fatigue analyses10.1046/j.1460-2695.2000.00242.x ↗
56. Roughness-Induced Crack Closure: An Explanation for Microstructurally Sensitive Fatigue Crack Growth10.1007/BF02644220 ↗
57. Analysis of roughness-induced crack closure based on asymmetric crack-wake plasticity and size ratio effect10.1016/j.msea.2006.03.154 ↗
58. Pokluda · 2010
59. Fatigue Crack Growth Behaviour and Role of Roughness-Induced Crack Closure in CP Ti: Stress Amplitude Dependence10.3390/met11101656 ↗
60. The effects of stress ratio on the growth behaviour of small fatigue cracks in an Aluminum alloy 7075–T6 (with special interest in stage I crack growth)10.1111/j.1460-2695.1990.tb00611.x ↗
61. Fatigue crack propagation behaviour of short cracks; the effect of microstructure10.1111/j.1460-2695.1981.tb01116.x ↗
62. A comparison of crack-tip field parameters for large and small fatigue cracks10.1115/1.3225868 ↗
63. Microstructurally-dependent model for predicting the kinetics of physically small and long fatigue crack growth10.1016/j.ijfatigue.2015.08.002 ↗
64. A unified prediction model for physically small crack and long crack growth based on modified CTOD10.1016/j.engfracmech.2022.108650 ↗
65. A proposed criterion for fatigue threshold: dislocation substructure approach10.1111/j.1460-2695.1983.tb00342.x ↗
66. Distribution characteristics of in-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes10.1007/s11661-010-0410-4 ↗
67. Y.B. Chun, C.H.J. Davies. The evolution of in-grain misorientation axes (IGMA) during deformation of wrought magnesium alloy AZ31. Essential Readings in Magnesium Technology, Springer, Cham; 2016, p.345-49. https://doi.org/10.1007/978-3-319-48099-2_55.10.1007/978-3-319-48099-2_55 ↗
68. Analysis of the different slip systems activated by tension in a α/β titanium alloy in relation with local crystallographic orientation10.1016/j.actamat.2004.09.040 ↗
69. The effects of temperature and strain rate on the yield and flow stresses of alpha-titanium
70. Slip dominated planar anisotropy of low cycle fatigue behavior of commercially pure titanium10.1016/j.msea.2022.143807 ↗
71. Deformation behavior of HCP Ti-Al alloy single crystals10.1007/s11661-002-0153-y ↗
72. Geometrically necessary dislocation density distributions in cyclically deformed Ti-6Al-4V10.1016/j.actamat.2012.07.003 ↗