Fatigue crack growth under non-proportional mixed-mode I + II. Role of compression while shearing
Source abstract
Abstract
Abstract Mode I + II fatigue crack growth tests are run, following sequential or pseudo-sequential loading paths, representative of those computed for ”squat type” cracks in rails. Stereo DIC provides the near-tip displacements, from which Δ K I effective and Δ K II effective are derived. Compression while shearing extends coplanar growth, by slowing down the wear-induced rise of the effective mode mixity ratio, up to the critical value for which bifurcation occurs. The consideration of plasticity and contact and friction stresses improves crack paths predictions, compared to the maximum tangential stress criterion. The coplanar crack growth rate correlates well with a combination of Δ K I effective and Δ K II effective .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical stress and fatigue analysis · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. The tridimensional gradient of microstructure in worn rails - experimental characterization of plastic deformation accumulated by RCF10.1016/j.wear.2017.09.001 ↗
2. A branch criterion for shallow angled rolling contact fatigue cracks in rails10.1016/0043-1648(95)06621-7 ↗
3. Numerical modelling of a 3d rail rcf 'squat'-type crack under operating load10.1046/j.1460-2695.1998.00082.x ↗
4. Numerical simulation of rolling contact fatigue crack growth in rails with the rail bending and the frictional contact10.1016/j.engfracmech.2016.12.019 ↗
5. Bonniot T. Fatigue crack growth under non proportional mixed-mode loading in rail steel. From experiment to simulation. Ph.D. thesis, Ecole Polytechnique (18 November 2019). URL https://tel.archives-ouvertes.fr/tel-02443488.
6. Mixed mode II and III fatigue crack growth in a rail steel10.1016/j.ijfatigue.2018.01.010 ↗
7. Bold · 1990
8. Fatigue crack growth rates under sequential mixed-mode I and II loading cycles10.1046/j.1460-2695.2000.00342.x ↗
9. Two measurement techniques for determining effective stress intensity factors10.1046/j.1460-2695.2000.00341.x ↗
10. Fatigue crack growth under mixed loading of tensile and in-plane shear modes10.2219/rtriqr.44.65 ↗
11. Fatigue crack growth under non-proportional mixed-mode loading in ferritic-pearlitic steel10.1111/j.1460-2695.2004.00817.x ↗
12. Long co-planar mode III fatigue crack growth under non-proportional mixed mode loading in rail steel10.1177/0954409712440397 ↗
13. Akama M, Fatigue crack growth under non-proportional mixed mode loading in rail and wheel steel Part 1: sequential mode I and mode II loading, Appl. Sci. 9.10.3390/app9102006 ↗
14. Local approach to fatigue cracks bifurcation10.1016/j.ijfatigue.2007.06.001 ↗
15. Fatigue crack propagation and threshold for shallow micro-cracks under out-of-phase multiaxial loading in a gear steel10.1016/j.engfracmech.2010.05.015 ↗
16. Tarantino · 2011
17. A comparison of Mode III threshold under simple shear and RCF conditions10.1016/j.engfracmech.2011.02.010 ↗
18. Experiments under pure shear and rolling contact fatigue conditions: Competition between tensile and shear mode crack growth10.1016/j.ijfatigue.2012.05.007 ↗
19. A circumferential crack in a cylindrical shell under torsion10.1007/BF00185200 ↗
20. Tada · 1973
21. Determination of effective Stress Intensity Factors under mixed-mode from DIC fields in presence of contact stresses and plasticity10.1111/str.12332 ↗
22. Influence of the loading path on fatigue crack growth under mixed-mode loading10.1007/s10704-009-9396-6 ↗
23. Toward an understanding of mode II fatigue crack growth10.1520/STP23220S ↗
24. Contact and rubbing of flat surface10.1063/1.1721448 ↗
25. Contact size, frequency and cyclic normal force effects on Ti-6Al-4V fretting wear processes: An approach combining friction power and contact oxygenation10.1016/j.triboint.2016.12.049 ↗
26. Arnaud · 2018
27. A numerical simulation of fretting wear profile taking account of the evolution of third body layer10.1016/j.wear.2017.01.063 ↗
28. A dynamical FEA fretting wear modeling taking into account the evolution of debris layer10.1016/j.wear.2018.07.018 ↗
29. A finite element based approach to simulating the effects of debris on fretting wear10.1016/j.wear.2006.12.056 ↗
30. Third body modeling in fretting using the combined finite-discrete element method10.1016/j.ijsolstr.2013.12.036 ↗
31. A DEM-FEM coupling based approach simulating thermomechanical behaviour of frictional bodies with interface layer10.1016/j.ijsolstr.2015.11.026 ↗
32. An elastic-plastic investigation of third body effects on fretting contact in partial slip10.1016/j.ijsolstr.2015.11.013 ↗
33. Yue T, Abdel Wahab M, A numerical study on the effect of debris layer on fretting wear; Materials 9.10.3390/ma9070597 ↗
34. Semi analytical fretting wear simulation including wear debris10.1016/j.triboint.2016.12.012 ↗
35. The effect of plasticity on incipient mixed-mode fatigue crack growth10.1046/j.1460-2695.2003.00622.x ↗
36. Extra hardening due to cyclic nonproportional loading of an austenitic stainless steel10.1016/0956-716X(90)90178-J ↗
37. Crack kinking from an initially closed crack